Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Arcadia, CA
Gate repair in Arcadia usually costs between $180 and $650 for common fixes like hinge replacement, sensor realignment, and opener adjustment, with most jobs finished the same day the call comes in. What sets Arcadia apart is the gate stock itself: heavy custom-fabricated wrought iron on newer luxury estates, much of it built overseas, paired with automation systems that have to move a lot of steel every single day. When a 500-pound gate catches a Santa Ana gust, the hinge welds and opener gears take the hit. Call (877) 610-2993 and a live person answers. Not a menu system. A person.
Why Arcadia Homes Are Different
Arcadia sits at the base of the San Gabriel Mountains, and the Santa Ana winds that funnel through the foothill corridors hit gates hard, especially the heavier ornamental ones common in the northern part of the city. We regularly see gates in Highland Oaks and along Canyon Road that have been racked out of square by wind alone. The hot, dry summer months also cook the grease out of operator gearboxes faster than in coastal cities, which shortens service intervals and causes the grinding noise homeowners around here hear before a full failure.
The housing stock compounds the issue. Arcadia has one of the highest concentrations of luxury estate teardown-and-rebuilds in the San Gabriel Valley, driven heavily by affluent Chinese-American buyers favoring grand dual-swing and sliding iron gates with complex multi-brand automation. Many of these gates were custom-fabricated overseas and shipped in, meaning hardware, hinge specs, and weld quality vary wildly. U.S. standard replacement parts often don’t fit without modification, a problem rarely encountered just a few miles west in Pasadena or east in Covina. Technicians who work Arcadia regularly learn to expect metric-sized tubing, unusual picket spacing, and curlicue details that need to be matched by hand.
Gate Repair in Arcadia
Gate repair in Arcadia usually means one of two things: a heavy wrought-iron gate on a newer luxury estate that’s sagging or stalling, or an older ranch-style home’s gate that hasn’t been touched since the 1990s. Hal Gatewood has been fixing gates since 2001, and when you call, we show up with a truck stocked for this specific city’s gate stock. Most repairs run between $180 and $650, and the price is quoted and agreed before any work starts, not after. Here’s a closer look at the repairs we handle most often. For a full breakdown of what’s covered, see our Gate Repair service page.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Arcadia’s custom iron gates put tremendous load on posts, especially when wind gusts hit them broadside. We weld on site, so a cracked hinge bracket or a leaning post gets fixed right where it stands rather than removed and replaced with something that doesn’t match. A typical hinge replacement on a standard Arcadia driveway gate runs $250 to $400 per hinge, depending on gate weight and whether a new mounting plate needs welding.
Gate Realignment
Realignment seems like a small job until you realize the gate has been dragging against the ground for two years and the opener has been compensating the whole time. In Arcadia, where many homes have long, sloped driveways leading up to motor courts, realignment often involves resetting the hinge geometry and adjusting the opener’s travel limits at the same time. Realigning a sagging single gate usually lands between $250 and $400, and we verify the automation cycle a dozen times before we leave.
Electric Gate Repair
Electric gates in Arcadia take a beating from the Santa Ana winds that funnel through the foothill corridors. When a wind event strips the gears out of a LiftMaster or DoorKing operator, the gate usually stops mid-swing and leaves the driveway half-blocked. We diagnose the control board, motor, and limit switches on site, and we keep common parts for Arcadia’s dominant brands on the truck. Electric gate motor or control board replacement on a mid-range LiftMaster typically runs $450 to $750, and most electric gate repairs here are done same-day.
How fast can you get to my Arcadia home for gate repair?
Most Arcadia calls are answered same-day, and we typically arrive within a few hours. If your gate is stuck open or your car is trapped in the driveway, tell the person who answers and we’ll prioritize you. Call (877) 610-2993 and you’ll talk to a live person, not a recording.
Do you cover all Arcadia neighborhoods and ZIP codes?
Yes. We serve all of Arcadia including 91006, 91007, 91066, and 91077, from the foothill estates near Highland Oaks down to the ranch homes south of Huntington Drive. If you’re inside city limits, there’s no trip charge.
Gate Installation in Arcadia
Gate installation in Arcadia runs $2,800 to $9,500 for most driveway gates, with heavy custom ornamental double gates on the city’s luxury estates landing between $7,000 and $18,000 depending on size, automation, and site conditions. The newer luxury builds concentrated in northern Arcadia near the foothills almost universally feature automated driveway gates, so we size every operator to the actual gate weight and duty cycle rather than the brochure rating. A panel that looks light on paper can wreck a residential operator in a year if nobody bothered to check the hinge load ratings. See our Gate Installation page for the full process.
Swing Gate Installation
Swing gates in Arcadia are often dual ornamental iron panels on stone pillars, 16 feet wide or more, with underground operators and synchronized leaves. These jobs demand deep concrete footings, oversized hinge posts, and careful load math. A dual swing ornamental iron gate with synchronized operators on both leaves typically runs $7,000 to $12,000 for Arcadia’s heavier custom panels, and we’ve corrected more than one prior install where a contractor set hinge posts in two feet of concrete for a gate that needed three.
Sliding Gate Installation
Sliding gates are common in Arcadia on properties where the driveway slopes up from the street and a swing gate would hit the grade. For the heavy ornamental iron panels common up against the foothills, cantilever is usually the right call because the gate rides on rollers above grade and won’t drag through debris. A cantilever sliding gate with automation runs $5,000 to $9,500, including the safety photocells and edges required by code.
Pedestrian Gate Installation
Pedestrian gates in Arcadia serve two purposes: access for the gardener and pool service without opening the driveway, and a clean architectural match to the main gate. Post spacing and hinge alignment matter here just as much as on a 500-pound panel; fix the post, not the panel, or you’ll fix it twice. Pedestrian gates with matching hardware typically add $1,200 to $3,000 to a project.
Do I need entrapment protection on my new Arcadia driveway gate?
Yes. Any automated driveway gate in Arcadia, whether sliding or swing, requires entrapment protection by code. That means safety photocells across the gate opening, safety edges on moving panels, or both. We install these on every job and test them before we leave. A gate without working entrapment protection is a serious safety hazard, and no reputable contractor will install one without it.
How do Santa Ana winds affect newly installed automated gates in Arcadia?
They rack the gate frame out of square, shear hinge welds, and trip safety photocells. A gate that was perfectly aligned at install can start false-tripping the first time a strong Santa Ana event rolls through. We set posts deeper and use heavier hinge hardware on Arcadia installs specifically to handle this wind load. Call (877) 610-2993 if your new gate is fighting the wind.
Gate Motor & Opener in Arcadia
Gate motor and opener repair in Arcadia usually runs $260 to $580 for a motor replacement and $180 to $400 for control board or sensor work, and we can typically have a truck at your property the same day you call. Arcadia is home to some of the heaviest and most custom automatic gates in the San Gabriel Valley, so the standard fix that works in Pasadena often won’t hold up on a wrought-iron estate gate in the northern foothills. We service Gate Motor & Opener issues on all nine brands we carry parts for, including Linear and DoorKing.
Gate Motor Installation
Motor installation in Arcadia usually runs $550 to $950 for a standard swing or slide operator, and the job gets quoted before we start. Heavy custom gates push that higher because the operator has to be sized to the actual load. We measure the post, the leaf weight, the wind exposure, and the hinge condition before we recommend an operator. Guessing is what burns out a motor in two years.
Gate Motor Repair
Most gate motor repairs in Arcadia are $180 to $400: control boards, limit switches, capacitor swaps, gear assembly lubrication or replacement. We carry parts on the truck for the operators most common to this area, which saves a second trip. When a motor truly is dead, replacement with a properly sized unit starts around $480 and goes up with gate weight. We always check the hinge post and header alignment on a repair because a new motor on a racked gate just burns out faster.
Slide Gate Motor Service
Slide motors on Arcadia estates carry a lot of weight across a long track, and the rack and pinion takes a beating. When the Santa Anas push a 300-pound gate even half an inch off its line, the motor strains and the obstruction sensor reads the pressure as an object. We re-rail, re-shim, and adjust rack mesh on site. Slide motor replacements here commonly run $600 to $1,100 depending on gate weight and whether the rack needs section replacement.
Why does my swing gate in Arcadia trip its obstruction sensor every time the Santa Anas blow?
The wind torques the gate leaf just enough to change the load the motor sees, and the operator’s obstruction sensor reads that increased force as something in the path. It means your gate is flexing under wind load, usually starting at the hinge post or a weak weld. We true the frame, reinforce the post if needed, and re-set the operator’s obstruction limits. Call (877) 610-2993 and we’ll walk you through what’s happening.
My custom iron gate came from overseas and the motor bracket holes don’t line up with any U.S. operator. Can you still install a new opener?
Yes. We fabricate adapter plates on site, welded or bolted to the existing frame, so the new U.S. operator mounts solidly without hacking the gate. This is common in Arcadia’s northern foothills, where a lot of custom gates were fabricated abroad with non-standard bracket spacing and hinge specs. We build the mount to spec, then hang the operator on it. Estimate is free.
Gate Access Control in Arcadia
Gate access control in Arcadia means working on gates that are heavier, more ornate, and more custom than almost anywhere else in the San Gabriel Valley. A keypad or card reader for an Arcadia motor court typically runs $450 to $1,200 installed, and a full smart video intercom system on one of the foothills estate gates usually lands between $1,800 and $3,500. The challenge here is that overseas-fabricated gates often arrive with metric hinge barrels and non-standard bracket spacing, so a standard U.S. mount sits crooked or won’t sit at all. We shim it, build a custom adapter plate, or weld a mounting tab so the device sits flush. For a full breakdown, see our Gate Access Control page.
Video Intercom
Video intercom is the most common upgrade on Arcadia’s larger motor courts, and it’s also the one that goes wrong in the most interesting ways. When a heavy dual-swing gate cycles, the operator can inject electrical noise into the low-voltage feed and corrupt the intercom’s audio. We’ve fixed this on more gates off Highland Oaks Drive than we can count. A full video intercom system for an Arcadia motor court runs $1,800 to $3,500 depending on camera resolution, number of monitors, and whether we’re tying into an existing phone entry system.
Keypad Entry
Keypad entry on an Arcadia custom gate isn’t a drill-and-mount job. A standard U.S. keypad mount won’t sit flush on many overseas-fabricated gates, so we build the adapter plate rather than forcing it. A keypad install on an Arcadia estate gate typically runs $450 to $750, including wiring and programming, and we don’t leave until the code works from outside the gate and the exit loop works from inside.
Phone Entry
Phone entry systems in Arcadia get phantom calls more often than you’d believe. Loop detectors buried in newer concrete motor courts are frequently tied into the same conduit as landscape lighting, and the inductive field interference triggers the phone system to dial out even when no one is at the gate. We isolate the loop leads, add a ferrite choke, and the phantom calls stop. Phone entry installation in Arcadia typically runs $700 to $1,400.
My gate was custom fabricated overseas and the new keypad won’t mount flush. Is there a local fix?
Yes, and we do it regularly. Overseas gates often have metric hinge barrels and bracket spacing that doesn’t match U.S. keypad mounts. We fabricate a custom adapter plate or shim the bracket in the driveway so the keypad sits flush and doesn’t crack from vibration. Call (877) 610-2993 for a free estimate.
The video intercom at my Arcadia motor court drops the call every time the gate opens. Is the gate operator interfering?
Almost certainly yes. If the operator’s control board routes low-voltage AC through the same ground as the intercom, the gate’s motion injects noise that corrupts the audio. We isolate the feeds, bond the hinge post correctly, and the drops stop. That’s a repair we’ve done on more than one motor court off Highland Oaks Drive.
Gate Parts & Welding in Arcadia
Arcadia’s gates are not like the ones you’ll find in Monrovia or Temple City. Up here against the San Gabriel foothills, the newer estate homes run to heavy custom-fabricated wrought iron, ornate dual-swing entrances, and automation systems that have to move a lot of steel every single day. When a hinge weld cracks or an operator starts laboring, you need someone who has actually worked on those gates, not someone flipping through a parts catalog. See our Gate Parts & Welding page for the full scope of what we fabricate and repair.
Hinge Replacement
Most gate problems in Arcadia start at the hinge, because most gates here are heavier than the hinge hardware was ever meant to carry. On the custom iron gates common in the northern foothill neighborhoods, we regularly see barrel hinges with worn pins, split knuckles, and welds that have cracked along the post line. A typical hinge replacement on a standard Arcadia driveway gate runs $180 to $420 per hinge, depending on the gate’s weight and whether we need to weld a new mounting plate.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Arcadia’s newer luxury builds often have posts set in concrete that looks substantial but wasn’t engineered for a 400-pound iron gate on a long hinge offset. Replacing it properly means cutting, setting a new steel post in a proper footing, and re-hanging the gate square. In Arcadia, post replacement typically runs $600 to $1,400 depending on post size, concrete depth, and whether we’re reusing the existing gate panels.
Custom Welding
This is where we earn our keep. Many ornate iron gates in Arcadia were custom-fabricated overseas and shipped in, which means hinge specs, tube dimensions, and weld quality vary wildly from one house to the next. U.S. standard replacement parts often don’t fit without modification. Custom welding runs $150 to $500 for smaller fabrication and $500 to $1,500 for structural work, and we do it on site in the driveway so the gate never leaves your property.
How much does gate welding cost in Arcadia compared to nearby cities?
Arcadia tends to run slightly higher than Monrovia or Temple City for structural welding because the gates are heavier and more often custom-fabricated, which means more time matching details and more material per repair. Post replacement in Arcadia typically runs $600 to $1,400 mostly due to the size of the gates and the depth of the footings we’re rebuilding. The price you’re quoted is the price you pay.
Do you warranty your welding and parts work in Arcadia?
Every job we do carries the 90-Day Done Right Promise in writing. If a weld cracks, a hinge loosens, or a part fails within 90 days of the repair, one call brings Hal back. There’s no fine print and no runaround. That’s the whole point of having the owner’s name on the invoice instead of a corporate logo.
Brands We Service in Arcadia
We stock parts on the truck for the operators most common to Arcadia’s luxury estates, including Linear, Viking, DoorKing, and Ghost Controls. We’re certified to service nine major gate brands, so the part your gate needs is usually already on board. See our brands for the full list. If a part isn’t on the truck, we can usually have it in hand within one business day and finish the repair on the second visit.
Pricing for Gate Repair in Arcadia, CA
| Service | Typical range in Arcadia |
|---|---|
| Hinge replacement or weld repair | $180 - $420 per hinge |
| Gate realignment (single gate) | $250 - $400 |
| Electric gate motor or control board replacement | $450 - $750 |
| Single-leaf swing driveway gate with operator | $2,800 - $4,500 |
| Dual swing ornamental iron gate with synchronized operators | $7,000 - $12,000 |
| Cantilever sliding gate with automation | $5,000 - $9,500 |
| Pedestrian gate with matching hardware | $1,200 - $3,000 |
| Gate motor installation (standard swing or slide) | $550 - $950 |
| Slide motor replacement | $600 - $1,100 |
| Keypad entry system installed on existing gate | $450 - $750 |
| Full video intercom system for motor court | $1,800 - $3,500 |
| Post replacement | $600 - $1,400 |
What pushes Arcadia prices upward is the gate stock itself: heavier custom iron panels, deeper footings for wind load, imported hinge and bracket modification, and intercom or camera integration. Every price is quoted and agreed before we start, and it doesn’t change at the door. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Arcadia
We work across all of Arcadia, and typical response time for repair calls is under two hours in most of the city. The neighborhoods we’re in most often:
- Highland Oaks and the northern foothill streets
- Santa Anita Oaks and the streets around the Arboretum
- Upper Rancho and the Baldwin Avenue corridor
- The ranch-style pockets south of the 210 near Santa Anita Avenue
- Custom estate streets off Canyon Road
If your street is not listed, that doesn’t mean we skip it. It means the list above is where the calls happen to cluster.
Service Area - Cities Near Arcadia
We cover all four Arcadia ZIP codes plus the surrounding San Gabriel Valley communities. If you’re in Mayflower Village, Sierra Madre, Monrovia, Temple City, or East Pasadena, same crew, same pricing, no trip charge inside the county. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Arcadia locally.
Serving Arcadia, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Arcadia and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Arcadia coverage area; if your address is on it, we can help.
Also serving nearby: Arcadia, CA, Mayflower Village, CA, Sierra Madre, CA, Monrovia, CA, Temple City, CA, East Pasadena, CA.
FAQs About Gate Repair in Arcadia
We typically reach most of Arcadia within 60 to 90 minutes for urgent gate failures, and we answer the phone live 24 hours a day, seven days a week. When a gate won’t close and you have a dog or a kid or a car you need to secure, call (877) 610-2993 and we’ll give you a straight answer about when we’ll be there.
Most gate repairs in Arcadia don’t require a permit, but some HOAs in the foothill neighborhoods have their own architectural review rules for new installations or visible changes like adding a pedestrian gate or changing the gate’s finish. We can help you sort out what your HOA needs before any work starts, and we flag permitting issues early so the job doesn’t stall.
Yes. We run the low-voltage or line-voltage power to the operator, install safety photocells across the gate opening and safety edges on moving panels, and test the entrapment protection before we leave. A gate that closes without working safety edges is a hazard, and we won’t hand you one. Call (877) 610-2993 for a free estimate.
If your gate is sagging, grinding, or refusing to close, call (877) 610-2993 and a live person answers. We’ll give you an honest assessment, a written price before any work starts, and a repair done right the first time. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arcadia Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond