Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Lantana
Gate access control in Lantana means keeping your entry system reading keypads, cards, and phone calls through salt air that eats electronics twice as fast as inland towns. A typical keypad replacement here runs $220-$480, and a full smart phone entry retrofit usually lands between $650 and $1,400 depending on your operator’s age. Hal Gatewood has been repairing and retrofitting gates since 2001, and his crew knows which boards survive the lagoon air and which ones die in two summers. Call (877) 610-2993 and a live person picks up, day or night.
We work the whole 33462 every week, from the older ranch homes off W Pine Street to the manufactured home communities that need a different, lighter approach to gate hardware. You won’t get a script reader. You’ll get someone who knows that Lantana’s post-Andrew wind-load rules complicate what looks like a simple keypad job. The name is on the shop, and the shop is down the road in South Florida, not three states away.
Why Gatewood Fence & Gate Is Lantana’s Preferred Gate Access Control Company
We are not the cheapest quote you’ll find in Lantana. We are the one that answers when you call back. Hal Gatewood started this shop in 2001 and still runs it owner-operated, with his name on every invoice. That 90-Day Done Right Promise is stamped in writing on every job: if it’s not done right, we make it right. One call brings Hal back, no phone tree, no runaround.
Local knowledge matters more than most people know here. The wind-load ordinance in Palm Beach County, written after Hurricane Andrew, applies to gate posts and automated systems, not just roofs and windows. An out-of-county tech might handle Lantana Gate Installation and never check whether your 1980s swing gate post meets current lateral force ratings. We check. That’s the difference between a gate that works for a season and one that passes your HOA inspection and keeps working.
Our Lantana customers usually find us after a national outfit quoted one price on the phone and changed it at the driveway. That does not happen with us. You get upfront pricing, written, before any work starts. Hal has been serving Lantana from his South Florida base for years, and his crew carries corrosion-rated parts on the truck because they know what the lagoon air does to gate electronics here.
Our Gate Access Control Services in Lantana
Keypad Entry
Keypad membranes pit faster in Lantana than almost anywhere else in Palm Beach County. Salt aerosol settles into the button contacts, and within two to three years digits stop registering. In the mid-century ranch neighborhoods like those along W Pine Street, we frequently swap out failed keypads on 1990s operators. A basic keypad replacement in Lantana runs $220-$360 installed; a full outdoor-rated stainless keypad with corrosion-resistant contacts costs $380-$480 but actually lasts in this air.
Phone Entry
Phone entry systems are common for Lantana’s smaller HOA communities and the mobile home parks in 33462 where a call box at the front gate beats running cable to every lot. The original telephone entry boards from the 1990s are now failing predictably: pitted contacts, dead relays, and boards that short after hurricane-season surge wets the housing on lagoon-side streets. We retrofit these onto modern cellular-based entry where running copper is no longer practical. A phone entry retrofit in Lantana typically lands between $900 and $1,400 depending on whether you keep your existing posts.
Card Reader
Card readers near the Intracoastal take a beating from salt and UV. We see reader contacts corrode until fobs stop reading entirely. The fix is often simpler than replacing the whole access panel: switch to a sealed proximity reader rated for marine environments. We stock those readers for Lantana jobs and install them same week. Figure $300-$550 for a replacement reader installed, assuming your existing wiring passes inspection.
Smart Access
Most Lantana homeowners want phone-based entry on their existing gate, not a whole new Gate Motor & Opener - Lantana. That’s usually possible. We add myQ or similar smart modules to LiftMaster, Viking, and DoorKing operators so you can open the gate from an app, get alerts, and set scheduled access. The honest answer for old 1990s boards: sometimes a retrofit board kit makes sense, sometimes the cost of adapting a phone system to a board already dying from salt corrosion is wasted money. We’ll tell you which one you have. Expect $650-$1,400 for a full smart access retrofit, depending on the operator.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lantana
Hal’s crew is certified to service nine major brands, and on this side of Palm Beach County we most often work on DoorKing telephone entry systems, Viking operators, and Ghost Controls on residential swing gates. We keep common boards, loop detectors, and corrosion-rated hardware on the truck so most Lantana repairs don’t wait on a part shipped from a warehouse in Texas. If you have an older LiftMaster or a Mighty Mule from the big-box store, we fix those too. Our Gate Access Control team sees every brand, every week, across this town.
Common Gate Access Control Problems We See in Lantana Homes
- Salt-corroded keypad and card reader contacts. Buttons stop sensing digits, fobs get flaky, and the read distance shrinks. Sealed marine-rated components are the only long-term fix this close to the Lake Worth Lagoon.
- Legacy loop detectors failing from UV-baked wire insulation. The gate ignores your car, holds open when nothing’s there, or reverses for no reason. On Lantana properties built in the 1960s and 1970s, the original loop wiring is now past its design life.
- Water intrusion into operator housings after surge events. Lagoon-side lots flood during hurricane season, and the resulting corrosion shorts non-marine boards within weeks, not years. We replace those boards with conformal-coated or marine-rated units.
- Wind-load non-compliance discovered during a small repair. A new keypad or phone entry install triggers a code check, and we find the original gate post anchoring is below current Palm Beach County lateral force requirements. This is extremely common on pre-Andrew gates.
Pricing for Gate Access Control in Lantana, FL
| Service | Lantana Typical Range |
|---|---|
| Keypad replacement (basic) | $220-$360 |
| Corrosion-rated keypad (outdoor, sealed) | $380-$480 |
| Card reader replacement (proximity, sealed) | $300-$550 |
| Phone entry retrofit (cellular) | $900-$1,400 |
| Smart access retrofit (app-based, existing operator) | $650-$1,400 |
| Loop detector replacement | $400-$700 |
Every price is quoted and agreed in writing before any work begins. No trip charge inside the county. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off. If another company gave you a written estimate, show it to us. We’ll give you a free second opinion, no obligation. Those are standing offers, not negotiations.
We Also Serve Cities Near Lantana
We regularly work the surrounding communities: Lake Worth, Lake Worth Corridor, Boynton Beach, and Greenacres City. If you’re in one of those towns and need Gate Access Control in Lantana or Lantana-level service, the same crew and the same 90-Day Done Right Promise apply. Same phone, same live answer.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Lantana
Salt aerosol from the Lake Worth Lagoon settles into keypad membranes and corrodes the contacts underneath, and Lantana’s compact footprint means virtually every property in 33462 sits inside that salt plume. We replace keypads here roughly twice as often as we do in inland Boynton Beach or Lake Worth. The fix is a sealed, marine-rated keypad with gold or nickel contacts, not another membrane keypad that will die the same way. Call (877) 610-2993 and we’ll confirm what’s on your gate right now.
Usually, yes. The original loop detector wiring buried under your driveway was installed decades ago, and South Palm Beach County’s UV and humidity have degraded the insulation to the point where the detector reads phantom vehicles. On lagoon-side lots, salt accelerates that breakdown and also corrodes the detector terminals inside the operator housing. When you call us for Gate Repair in Lantana, we dig up the old loop, lay a new sealed saw-cut loop, and drop the new detector into a conformal-coated enclosure. That job runs $400-$700 in Lantana depending on driveway width.
In many cases, yes. If the operator’s board is still reading inputs correctly and the motor hasn’t been submerged, we can add a smart access module that gives you phone control, alerts, and scheduled entry. But if that 1990s DoorKing or Viking board is already showing corrosion damage, adding smart access is money spent on a dying platform. During a recent job off W Pine Street, we replaced a 1990s DoorKing telephone entry board whose keypad had pitted contacts from salt air and whose hinge post footing was loose, causing intermittent loop detector faults. We set a new post footing, corrected the sag, and installed a corrosion-rated LiftMaster operator with fresh safety photocells. Sometimes the cheaper long-term answer is replacing the operator, not nursing it.
Because Palm Beach County’s post-Andrew wind-load rules apply to the entire automated gate assembly, not just the electronics. When we touch the access control on a gate, we’re legally and professionally obligated to check that the posts and hinges meet current lateral force ratings. Many older Lantana gates, especially those hung in the 1950s through 1970s, were built to older standards and are technically non-compliant. We won’t fail you for it. We’ll tell you what needs reinforcing and give you a written price before any work begins.
Test it. Block the gate’s closing path with a sturdy object like a trash can and watch what happens. The gate should reverse within two seconds of contacting the object, and the photocell beam should stop the gate before it ever touches anything. If the gate keeps pushing, your entrapment protection has failed, and that’s a safety problem we fix fast. All of our Lantana access control jobs include a full safety function test before we leave. If the photocells or the reversing unit are dead, we price those repairs up front, in writing, before any work starts.
Hal Gatewood has been fixing gates since 2001, and the difference between us and the national chains is simple: a live person answers the phone 24 hours a day, the price is written down before any work begins, and the name on the invoice is the same name on the shop. If you need gate access control work in Lantana, call (877) 610-2993 for a free estimate. We’ll show up when we say we will, we’ll quote it in writing, and we’ll stand behind it for 90 days. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lantana since 2001.