Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Johns Creek
Gate access control in Johns Creek almost always runs through an HOA board or property management company, not a single homeowner. That changes the job before it even starts: the board needs a written proposal, the equipment has to match architectural standards, and somebody has to coordinate with the management office. We’ve been doing that since 2001, and we stock parts for the exact operators installed across Johns Creek’s planned communities. When you call (877) 610-2993, Hal Gatewood answers or a live person does. No voicemail tree, no third-party call center. Just a local shop that knows McGinnis Ferry Road, Parsons Road, and State Bridge Road better than most people know their own street.
Why Gatewood Fence & Gate Is Johns Creek’s Preferred Gate Access Control Company
Most of our Johns Creek work comes from HOA boards and property managers who have already tried the national outfit and gotten burned. They call us because Hal’s name is on the shop and on every invoice, and because the shop is close enough to drive to and look him in the eye. We’ve been locally owned and owner-operated since 2001, with a published address and license number anyone can check. A live person answers the phone 24/7, and the person who shows up to service a gate operator on Parsons Road is the same person who will stand behind the work if anything goes wrong.
Our customer base in Johns Creek runs heavily toward board members and community managers who need someone accountable. The 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, we make it right. No fine print, no runaround. And because we’re certified on the FAAC, Elite, and LiftMaster operators that dominate Johns Creek HOAs, most calls get closed on the first visit instead of the third.
Response time to Johns Creek is typically same-day for gate access control failures that leave a community entrance stuck or unsecured. For board-approved upgrade work, we schedule around the HOA’s timeline and get it done in a window that works for residents. Standing offers apply in Johns Creek: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Our Gate Access Control Services in Johns Creek
Gate access control covers everything between the resident and the gate operator: the keypad, the remote, the phone entry system, the card reader, and the video intercom. In Johns Creek, these systems are usually shared by an entire community and controlled by an HOA board, which means the work has to be documented, approved, and coordinated. We handle all of that.
Keypad Entry
Keypad entry repair in Johns Creek typically runs $185-$420 depending on whether we’re replacing a keypad, a control board, or the wiring between the two. The most common failure we see is thunderstorm surge damage killing the keypad electronics while the mechanical gate itself is fine. We install weather-sealed keypads rated for Georgia’s summer electrical storms and tie them into the existing operator so the HOA doesn’t have to replace a working motor. Call (877) 610-2993 for a written quote before the board approves anything.

Video Intercom
Video intercom systems in Johns Creek run $900-$2,800 for a single entrance, depending on camera resolution, number of resident stations, and whether the existing operator can integrate or needs a retrofit board. This is the most common upgrade HOA boards in Johns Creek are requesting right now: the original gate systems from the 1990s and 2000s didn’t include video, and boards want visitor verification before granting entry. We integrate new video intercoms with existing FAAC, Elite, and LiftMaster operators rather than forcing a full gate replacement. In most cases, the operator stays; the access layer gets modernized.

Card Reader
Card reader installation and repair in Johns Creek typically runs $350-$900 per reader for commercial-grade proximity or RFID systems. HOAs use card readers for staff entrances, pool access gates, and contractor lanes where issuing remotes would be impractical. We see a lot of reader failures tied to Georgia humidity corroding the internal contacts over time. Our repair-first approach means we replace the reader and wiring, not the gate.

Phone Entry
Phone entry systems in Johns Creek run $600-$1,900 installed, depending on whether the system works off a landline, cellular connection, or VoIP through the management office. These are the most annoying systems to troubleshoot because the problem often lives in the phone provider’s equipment, not the gate. But when the call box at a Johns Creek entrance fails, residents sit at the gate and call the board. We diagnose the full path from the call button to the resident’s phone line and fix it in place, on site, with parts stocked for the systems common to this area.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Johns Creek
We’re certified to service nine major gate brands, and the three that matter most in Johns Creek are DoorKing, LiftMaster, and FAAC. Those are the operators installed in the bulk of the HOA entrance systems along McGinnis Ferry, Parsons, and State Bridge Roads, and we keep era-specific boards, loop detectors, and keypad parts in stock for them. That means less waiting on a distributor and more first-visit closes. We also service Viking, Elite, BFT, Linear, Ghost Controls, and Mighty Mule, so if a board has some oddball operator, we can handle that too.
Common Gate Access Control Problems We See in Johns Creek Homes
- Red clay soil shifting gate posts. Georgia’s expansive red clay heaves through wet and dry cycles, pushing hinge posts out of plumb on swing gates. The panel sags, the operator strains against the bind, and the access control board burns out trying to compensate. Fixing the control board without fixing the post means you’ll replace the board again next season.
- Thunderstorm surge killing keypads and boards. Fulton County gets intense afternoon thunderstorms all summer, and the low-voltage wiring on a gate entrance acts like an antenna for voltage spikes. We get called after every big storm for dead keypads on otherwise sound slide gates. Surge suppression on the low-voltage side stops most of it, which is why we install it on every access control job in Johns Creek.
- Loop detectors failing as asphalt shifts. As the drive lanes in older Johns Creek communities move with the clay underneath, the loop detectors crack. Residents sit at the gate with working remotes while the gate won’t auto-close, or it opens randomly in the middle of the night. We cut a new loop saw slot and install a fresh detector, which usually fixes it in one visit.
- Synchronized operator failures across neighborhoods. Dozens of subdivisions along McGinnis Ferry, Parsons, and State Bridge Roads were built in the same 10-to-15-year window with the same handful of builders and the same FAAC, Elite, and LiftMaster operators. Those systems are now hitting their 20-to-30-year service window at the same time. A technician stocked with era-specific parts for those three brands closes far more calls on the first visit than a generalist ever could.
Pricing for Gate Access Control in Johns Creek, GA
Gate access control repair in Johns Creek runs $185-$420 for keypad or card reader fixes, $250-$700 for loop detector replacement, and $350-$1,900 for phone entry or video intercom work depending on system complexity. Full access control modernization for a community entrance typically lands between $1,400 and $4,200. The biggest variables are whether the HOA wants video, how many residents need credentials, and whether the existing operator can integrate with new equipment or needs a retrofit board. Every quote is written, line-item, and agreed to before any work starts. You’ll know the number before we turn a single screw. Call (877) 610-2993 for a free estimate, and ask about the $40 off any repair over $200 if the board’s budget is tight this quarter.
We Also Serve Cities Near Johns Creek
Gatewood Fence & Gate handles Gate Access Control in Alpharetta, Peachtree Corners, Roswell, and Milton, plus the surrounding Fulton and north Fulton areas. If your HOA is just over the Johns Creek line, we’re still local to the gate. The same stocked truck covers the same neighborhoods, and the same live person answers the phone when you call about Gate Access Control in Johns Creek or anywhere nearby.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Johns Creek
Yes, in nearly every Johns Creek subdivision the HOA or management company must approve any change to the gate, including access control equipment. We provide a written proposal with equipment specifications, mounting details, and a line-item price the board can review. If the board needs a specific finish or a particular brand to match architectural standards, we work around that requirement rather than fighting it. We’ve been through this process with dozens of Johns Creek HOAs, so we know what the boards ask for before they ask it. Call (877) 610-2993 and we’ll get a proposal in your hands.
Yes. In most cases we can integrate a modern video intercom and keypad with an existing FAAC operator using a retrofit interface board, which runs $350-$650 in parts plus installation. The operator itself doesn’t need to be replaced unless it’s mechanically failing. This is exactly the kind of job we do all over Johns Creek: the original FAAC operators from the late 90s and early 2000s are still mechanically sound, and the boards want today’s access features without paying to replace a working gate system. We assess the operator, confirm compatibility, and install the new access layer in place. Call (877) 610-2993 and we’ll walk you through what your specific FAAC model will and won’t accept.
That’s the red clay under the gate posts and ground track moving. In summer, the wet-dry cycles make the clay heave and settle, which throws the rack and pinion out of alignment and makes the operator work against a bind. In winter the ground stabilizes, so the gate runs smoother. We got called to a gated community off McGinnis Ferry Road for exactly this. The slide gate was racking on the ground track, and our tech found the post footings had shifted in the red clay. We re-poured the footings, realigned the rack, and replaced the LiftMaster operator’s loop detector before the HOA board had to shut down the entrance lane. If your gate binds every summer, the fix is structural, not just a new operator. Call us at (877) 610-2993 and we’ll tell you what’s actually moving under that gate.
Yes. The low-voltage wiring running from your keypad to the control board acts like an antenna during a lightning strike or a power surge on the utility line. The surge travels through that wire and kills the electronics in the keypad or the board. This is the single most common access control failure in Johns Creek from June through August. We install surge suppression on the low-voltage side of every keypad and control board we touch in this area, and it cuts these failures dramatically. If your keypad is dead after a storm, call (877) 610-2993 for same-day service.
Yes. We do this regularly for Johns Creek HOAs that need multiple credential types on one entrance. Typically we install a keypad with programmable codes for contractors and delivery drivers, a phone entry or video intercom station for visitors, and the existing or upgraded remote system for residents. The whole setup runs through one control board we configure on site. Total cost for a multi-method access system on an existing gate typically runs $1,200-$3,000, depending on whether video is included and how many resident remotes the HOA wants issued. Call (877) 610-2993 and we’ll write a proposal the board can put on the next agenda.
If your Johns Creek gate access system is down, acting up, or just due for an upgrade the HOA can finally agree on, call (877) 610-2993. A live person answers around the clock, and the estimate is always free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Johns Creek and surrounding communities since 2001.





Before
After
Before
After
Before
After