Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Hendersonville
Gate access control repair in Hendersonville usually comes down to one of three things: a corroded control board, a post that has shifted in the lake-adjacent soil, or an operator that is simply twenty-five years old and tired. Hal Gatewood has been fixing all three since 2001, and he will tell you straight which one you’re dealing with before any work begins. If you live anywhere from Walton Ferry to Indian Lake, we can get a crew to your driveway fast. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Hendersonville’s Preferred Gate Access Control Company
We’re a Gate Access Control shop that shows up with a welding rig and a multimeter, not a clipboard and a sales pitch. Hendersonville homeowners have learned the hard way that a keypad that works sometimes is worse than one that fails completely, because it masks the real problem underneath. Hal’s name is on the shop, and the shop is a short drive from anywhere in 37075 or 37077. That is the oldest accountability there is.
We service the brands that actually got installed in Hendersonville’s subdivisions during the 1980s and 1990s building boom: Linear, DoorKing, Viking, Ghost Controls, and the LiftMaster operators hanging on half the lakefront gates along Old Hickory Lake. Every job carries our 90-Day Done Right Promise in writing. If it is not right, one call brings Hal back. No runaround, no “we’ll send someone next week.”
The person who shows up is background-checked and uniformed, and we publish our address and license. Seniors and veterans get a permanent 10% discount. You’ll get a straight price before work starts, and that price does not change at the door.
Our Gate Access Control Services in Hendersonville
Keypad Entry
Lakefront humidity in Hendersonville corrodes keypad contacts faster than almost anywhere else in Middle Tennessee. Morning fog off Old Hickory Lake settles into the keypad housing, and the brass contacts inside oxidize until the buttons become unreliable. We replace the keypad head, seal the housing properly, and re-pair it to your existing operator. No need to replace the whole system because a $40 contact strip failed.
Remote Control
If your gate remote works from the driveway but not from the street, that’s usually an antenna or receiver issue aggravated by moisture in the control housing. We see this pattern constantly on Hendersonville lakefront properties. We test the receiver range, replace corroded antenna connections, and program new remotes on site while you watch.
Phone Entry
Phone entry systems that route calls to your cell are a good fit for Hendersonville’s HOA communities and lakefront driveways where visitors arrive when nobody’s home. We install and program the cellular modules and make sure the relay fires reliably. If the board was installed in the 1990s, we’ll tell you honestly whether a retrofit makes sense or whether the module itself needs replacing.
Card Reader
For HOA community gates and multi-home shared driveways, card readers and proximity fobs keep unauthorized traffic out while letting residents through without rolling down a window. We stock readers compatible with the older DoorKing and Linear systems that dominate Hendersonville’s 1990s subdivisions, so we can usually fix your existing setup without forcing a full system swap.
We also handle video intercom, smart access, safety photocells and edge sensors, and loop detectors. For older gates around Hendersonville, compliance with UL 325 safety standards is a conversation we have on nearly every job. Your gate should stop and reverse when it meets resistance. If yours just keeps pushing, that’s a safety liability and a repair that cannot wait.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hendersonville
We’re certified to service nine major gate brands, and the ones we see most in Hendersonville garages and HOA entrances are Linear, DoorKing, Viking, and Ghost Controls. Because we stock local parts for these systems, we’re not waiting on a freight truck from Texas while your gate sits open. That matters when you live on a lakefront lot and the gate is the only thing between your boat and the road.
Common Gate Access Control Problems We See in Hendersonville Homes
- Keypad works sometimes, fails after rain. Moisture from Old Hickory Lake’s morning fog wicks into the keypad housing and corrodes the circuit trace. We replace the head unit and weather-seal the enclosure properly.
- Post lean makes the gate drag and trip the operator. Lake-adjacent soil swells and shrinks with seasonal water-table changes. The hinge post rotates toward the lake over time, the gate drags the ground, and the operator’s obstruction sensor locks out your remote and keypad. The fix starts with the post footing, not the electronics.
- Ice storms blow the control relays. Middle Tennessee’s January and February ice storms coat the operator arm in a frozen seal, so the motor overloads and burns out relays mid-cycle. We see this every winter in Hendersonville. The operator generally survives; the control board is what needs rebuilding.
- Obsolete control boards on 25-year-old gates. A lot of Hendersonville’s ornamental iron driveway gates went in between the mid-1970s and the late 1990s, and their control boards have been out of production for a decade. When the board fails, we can usually retrofit a modern controller into the existing operator housing for a fraction of the cost of full replacement.
Pricing for Gate Access Control in Hendersonville, TN
Here’s what Hendersonville homeowners can expect to pay for common access control repairs:
- Keypad head replacement and reprogramming: $185-$325
- Receiver or antenna repair and remote reprogramming: $150-$275
- Safety photocell installation (UL 325 compliance): $225-$400 per pair
- Loop detector replacement: $275-$500
- Control board retrofit on a 1990s operator: $350-$700
- Post reset and gate re-hang (lakefront soil shift): $600-$1,400 depending on footing condition
Every price is quoted and agreed before work starts. You also get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Hendersonville
Beyond Hendersonville, we regularly run calls to Goodlettsville, Millersville, Green Hill, and Mount Juliet. If you’re in one of those communities and your gate keypad is acting up, the same crew and the same 90-Day Done Right Promise apply. You can learn more about our coverage on our Hendersonville page.
Serving Hendersonville, TN - Our Local Coverage Area
We’re based in the Hendersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hendersonville
Heavy rain near Old Hickory Lake raises the local water table and saturates the soil around your gate posts, which causes the post to shift slightly and the gate to fall out of alignment. When the gate misaligns, the operator’s obstruction sensor trips and locks out the keypad signal. The keypad itself is usually fine; the problem is the post footing and the alignment. We reset the post, re-hang the gate, and the keypad works again. Call us for an inspection, estimates are free.
Hendersonville’s ice storms typically hit in January and February and coat the operator arm in a frozen seal. The motor strains against that seal and overloads, which burns out the control relays inside the board. Symptoms include the gate opening halfway, stopping, or failing to respond at all. We replace the damaged relays or retrofit the board, then recommend a weather hood for the operator housing so the next storm doesn’t do the same thing.
Yes, in most cases. The 1990s DoorKing and Linear operators installed at Hendersonville’s HOA entrances were built solid, and the steel cabinet usually has room for a modern video intercom module and a smart access controller. We can mount the camera, run the communication wiring, and program the resident directory without pulling out the existing operator. You don’t need to replace a working motor to get modern access features.
On Hendersonville lakefront lots, a sagging swing gate is almost always a structural problem first. The hinge post sits in soil that expands and contracts with the Old Hickory Lake water table, and over ten or twenty years the post rotates toward the water. The gate starts dragging, the operator trips, and now your remote and keypad don’t work. Fixing the post footing and re-hanging the gate has to happen before any access control electronics will behave reliably. We can do both on the same visit.
Yes. Any time you add or modify an access control device on a motorized gate, UL 325 compliance requires that the gate has functioning safety devices: photocells, edge sensors, or both. A 1990s gate that never had them is out of code the moment you hang a new keypad on it. We install the photocells, wire the edge sensor, and test the reversal function before we call the job done. It’s not a bureaucratic box to check; it prevents a gate from closing on a child or a dog. Call (877) 610-2993 to get your gate compliant and working the same day.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hendersonville since 2001.
Call (877) 610-2993 now for a free estimate on gate access control in Hendersonville. Hal or one of his crew will answer in person, and you can drive to the shop and look him in the eye if you’d rather talk face to face.