Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hendersonville
Gate repair in Hendersonville usually costs between $150 and $450 for common fixes like hinge replacement, post resetting, and operator adjustments, and most jobs are done in a single visit. If your gate is dragging, stuck half open, or the motor stopped responding, a local tech can diagnose it fast, give you a real price, and fix it the same afternoon in most cases. The lakefront soil here does things to gate posts that inland neighborhoods never see, and we have been sorting it out for years. Call (877) 610-2993 and a live person picks up. That’s how it works with us.
We know Hendersonville the way you do. The subdivisions off New Shackle Island Road and the lakefront drives branching down to Old Hickory Lake have older gates, heavier humidity, and real expectations about someone showing up when they say they will. Our Gate Repair team drives the same roads you do. No voicemail maze. No out-of-town script.
Why Gatewood Fence & Gate Is Hendersonville’s Preferred Gate Repair Company
Hal Gatewood started fixing gates in 2001, and he never left. That matters in Hendersonville because so many of the gates here were installed during the subdivision boom of the 1980s and 1990s, and they are now failing in the same predictable ways. A national company will tell you to replace the whole gate. Hal will weld the hinge, rebuild the post footing, and stand behind it with the 90-Day Done Right Promise in writing. If it is not right, one call brings him back.
Response time to Hendersonville is honest: we schedule same-day for genuine emergencies like a gate stuck open with a dog loose or a motor smoking, and we plan everything else around your day, not a four-hour dispatch window. A live person answers the phone 24/7. You will not get a recording or a menu tree. You get Hal or someone from his crew.
Our customers in the 37075 and 37077 ZIP codes keep calling back because the person who quotes the job is the same person who shows up to do it. Background-checked, uniformed, and carrying the tools in the truck to weld on site in your driveway, not haul your gate to a shop. That is why we have a strong local reputation in Hendersonville and why we still see the same faces at the hardware store.
Our Gate Repair Services in Hendersonville
Electric Gate Repair
Electric gates in Hendersonville fail most often after a Middle Tennessee ice storm. Frozen operator arms and seals force the motor to strain against a load it was never built for, and that burns out capacitors and control boards fast. We test the motor, the capacitor, the limit switches, and the receiver before recommending anything. If it is fixable, we fix it. If the board is obsolete and no longer manufactured, we tell you that plainly and price both options.
Automatic Gate Repair
An automatic gate that opens halfway and stops is common around Hendersonville, but the cause is often not the operator at all. We see post lean from saturated lakeside clay dragging the gate against the drive, and that mimics a motor problem perfectly. Our automatic gate repair starts by checking what the gate is sitting on before we touch a single wire. It saves Hendersonville homeowners from paying for a new operator they did not need.
Hinge & Post Repair
This is the core of most Hendersonville gate failures, especially on lakefront properties along Old Hickory Lake. Water-table fluctuations expand and contract the soil, posts settle unevenly, and the gate sags until it drags. Rust-corroded hinge pins on ornamental iron gates are just as common, driven by near-daily morning fog and high humidity. We reset posts in new concrete with compacted gravel drainage, replace hinges with heavier-duty hardware when needed, and weld cracks on site so the gate never leaves your property.
Gate Realignment
A gate that does not close square, drags on one corner, or sits crooked is almost always a post and hinge issue. Realigning a gate in Hendersonville is not about adjusting bolts. It is about cutting the gate free, truing the post, rehanging it level, and checking the operator’s force limits so the motor isn’t working against the structure. Fix the panel without the post and you’ll fix it twice. We make it right the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hendersonville
We service the brands Hendersonville actually has, including Viking, Ghost Controls, and LiftMaster operators still running in subdivisions built in the 1990s. Because we stock parts locally for Hendersonville customers, we don’t order from a warehouse two weeks out. When your gate is down, that speed matters. We are certified to service nine major gate brands, and if you have an older DoorKing or Elite board that failed, we know which aftermarket replacements hold up and which ones do not.
Common Gate Repair Problems We See in Hendersonville Homes
- Rust-corroded hinge pins and frame bottoms on lakefront iron gates. Morning fog off Old Hickory Lake is a daily event in the warm months, and high humidity accelerates corrosion on untreated ornamental iron. Hinge pins seize, grit out, and snap, and the gate drops before the motor even knows something is wrong.
- Frozen operator arms during January and February ice storms. Ice coats the hinges and seals, the operator forces the gate against a frozen load, and either the arm bends or the control board fries. This is the single most common cold-weather failure mode we see in Hendersonville.
- Post lean from water-table fluctuation on lake-adjacent lots. Posts set into soil that expands and contracts with seasonal water-table shifts can settle two to three inches over a decade. The gate drags, the operator overheats, and the homeowner thinks the motor failed. It did not. The ground moved.
- Obsolete control boards from the 1990s on HOA entrance gates. Hendersonville’s HOA-governed subdivisions installed entrance gates in bulk during the 1990s boom, and those boards are now discontinued. We source matching aftermarket boards or retrofit the gate with a modern operator where entrapment safety makes retrofitting the older mechanism impractical.
Pricing for Gate Repair in Hendersonville, TN
Here are real numbers for Hendersonville’s market, not vague ranges from a national call center. Hinge replacement runs $150 to $300 per hinge, including removal of the corroded pin and install of a heavier-duty replacement where needed. Single post resetting with new concrete footing and gate truing runs $400 to $800 depending on access and demolition of the old footing. Electric operator troubleshooting and common board or capacitor replacement runs $200 to $500, while a complete operator replacement runs $1,200 to $2,800 installed. Weld repairs start at $125. Every quote is agreed before any work starts, and you get $40 off any repair over $200. Call (877) 610-2993 for a free estimate. You will know the price before we lift a tool.
We Also Serve Cities Near Hendersonville
Our Gate Repair in Hendersonville coverage extends to the surrounding communities we know well, including Goodlettsville, Millersville, Green Hill, and Mount Juliet. If you live just over the line, the same live person still answers and the same 90-Day Done Right Promise still applies.
Serving Hendersonville, TN - Our Local Coverage Area
We’re based in the Hendersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hendersonville
Yes, any repair that involves the gate moving automatically requires entrapment protection to meet current UL 325 safety standards, and this is not optional. Many Hendersonville gates built in the 1980s and 1990s predate those requirements or have disconnected safety edges, and we will not leave a gate operating unsafely. A qualified tech can confirm whether your existing photo eyes and edges are compliant or need replacement during the service. Call (877) 610-2993 and we will tell you exactly what your gate needs.
Most of the time it is the post. Lakefront soil around Old Hickory Lake expands and contracts with water-level changes, and posts set without proper drainage settle gradually until the gate drags and overloads the motor. The motor then fails because it was working against a load it was not designed to move. The fix is a post reset and gate realignment first, then test the operator to see if any electronics were damaged. Call (877) 610-2993 for a free post inspection.
In many cases yes, but not in every case. A 1980s swing gate can often accept a retrofit operator with current UL 325 entrapment protection, photo eyes, and safety edges, provided the posts are structurally sound and the gate itself is not rusted beyond repair. If the post is compromised or the gate frame is corroded through, installing a new operator is throwing good money after bad. We will tell you honestly, show you the options in writing, and recommend whichever costs less over the life of the gate. Call (877) 610-2993 for a free assessment.
Hendersonville sits on one of the longest stretches of Old Hickory Lake shoreline in Tennessee, and that lakefront geography creates a failure pattern inland suburbs like Brentwood and Franklin rarely see. Near-daily morning fog and high humidity accelerate rust on hinge pins and motor seals, while saturated, shifting lake-adjacent soils cause post lean that overloads operators even when the electronics test fine. Winter ice storms add frozen seals and arms. The combination is brutal on gates, and it is specific to lakefront communities like Hendersonville. We fix it differently here because the ground itself is part of the problem.
You have two realistic options. First, we can source and install a compatible aftermarket board if the rest of the gate and operator are in good shape, which typically costs $300 to $600 installed. Second, if the board is obsolete and the operator itself shows wear, a full operator replacement with modern UL 325 safety compliance runs $1,200 to $2,800 installed and buys the HOA another 15 to 20 years. We will never install a discontinued board from salvage and hope it holds. Call (877) 610-2993 and we can look at the gate this week.
What Actually Happens When You Call
You call (877) 610-2993. A live person picks up. You tell us what the gate is doing, or not doing, and where in Hendersonville you are. We schedule a time. The person who shows up is background-checked, uniformed, and drives a truck with the shop’s name on the door, not a rental. If the gate can be welded in your driveway, it is welded in your driveway. You approve the price before any work starts. That’s it. No three-hour windows, no call center in another state, no surprise invoice at the door. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hendersonville since 2001.