Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Beverly
Gate access control in Beverly typically runs $450-$1,800 for a complete keypad, intercom, or card reader system, with most repairs landing between $180 and $380. We’re Gatewood Fence & Gate, and we’ve worked on gates along Cabot Street, up through Cove, and out to the estate drives in Beverly Farms and Prides Crossing. If you need someone who actually shows up, call (877) 610-2993 and you’ll get a live person, not a voicemail. We coordinate our Beverly crews from our Boston office, but the person who answers your call can schedule service here same-week for most repairs.
This page breaks down what access control costs in Beverly, what actually fails on coastal gates here, and why the salt air off Salem Harbor changes how these systems need to be serviced. Read it through or call us right now. Either way, you’ll get straight answers.
Why Gatewood Fence & Gate Is Beverly’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001 and the name’s still on every invoice. That matters in Beverly because the gates we work on aren’t the kind you buy from a catalog. Beverly’s older estate properties near Hale Street and around Beverly Farms have original ironwork, custom scrollwork, and access systems that need someone who welds on site and matches period hardware rather than swapping in whatever’s on the truck.
We answer calls at (877) 610-2993 24 hours a day. Not a dispatch queue. Not a call center three states away. When a sub-zero night at Prides Crossing takes out a keypad, you reach someone who knows the roads here. Our Beverly customers see the same crew most visits, background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings us back. No runaround.
We also hold a published address and license number anyone can look up. Hal isn’t passing through. He’s the guy you’ll see at the hardware store on Elliott Street, and he stands behind every welded repair the same way he would for a neighbor. That’s the oldest accountability there is.
Our Gate Access Control Services in Beverly
Here’s what we install and repair across Beverly, from the Victorians near downtown to the gated drives in Beverly Farms. Every estimate is free and quoted in writing before work starts. The price you agree to is the price you pay.
Keypad Entry
A keypad entry system in Beverly for a single swing gate runs $450-$950 installed, depending on whether we’re tapping an existing operator or wiring from scratch. We regularly retrofit keypads onto estate gates in Beverly Farms where the original mechanical latch is corroded or stripped. We match the faceplate finish to the existing hardware so a new keypad doesn’t scream “2026” next to scrollwork from 1908.
Remote Control
Remote control systems for Beverly gates cost $180-$400 for receiver and transmitter replacement, and up to $700 if the operator’s logic board is salt-damaged. In Prides Crossing we often find that remotes only work from ten feet away because the antenna wire has corroded inside its jacketing. That’s a $90 fix with the right connector, not a $600 board replacement.
Phone Entry
Phone entry systems let you buzz a visitor through from your cell, and in Beverly’s estate neighborhoods they often pair with the call box at the street. A full phone entry retrofit runs $800-$1,600. We run the line through conduit rated for coastal exposure, because the salt air here eats unshielded low-voltage wire in two or three seasons.
Card Reader
Card reader access for Beverly gates costs $500-$1,200 installed. The readers we use are sealed against moisture, which matters more here than almost anywhere on the North Shore. A reader that works fine in Peabody or Danvers will fail early on a Beverly Farms gate if the housing lets salt mist wick into the terminals.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Video Intercom and Smart Access for Beverly Estates
Video intercom is the one upgrade that changes how Beverly homeowners use their gates, especially on long winter nights when you don’t want to walk to the end of a frozen drive to see who’s there. A wired video intercom system with a gate station camera starts at $1,200 and runs to $2,400 installed, including the power run and gate operator integration. We integrate intercoms with FAAC, BFT, and Viking operators on Beverly estate gates and tune the release timing so the gate swings open only after you’ve actually seen the visitor on screen.
Smart access through a phone app is easier than it used to be, but the hardware still has to survive the environment. We mount antenna arrays where snow off the garage roof won’t bury them, and we seal every outboard connection against salt intrusion. That’s the difference between a system that works for five years and one that fails every March when the thaw hits.
Trusted Brands We Service in Beverly
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Beverly calls we mostly see FAAC and BFT on the estate gates, with Viking showing up on older residential installs. We keep common Linear receivers and BFT safety edge parts in stock for faster turnaround, and anything we don’t have we can weld or fabricate on site. We don’t tell you to replace a FAAC board when a corroded terminal block is the actual problem. We fix the part that failed and leave the rest alone.
Common Gate Access Control Problems We See in Beverly Homes
- Salt-driven corrosion inside hinge barrels and mounting bolts. The gate looks solid from the street, but the pins inside the hinge barrels have rusted hollow. The keypad works, the operator runs, and the gate still sags or binds because the hinge is gone from the inside. We probe and torch these, not just eyeball them.
- Freeze-thaw heave throwing operators out of level. Beverly gets 40 to 50 freeze-thaw cycles a year. Shallow post footings heave, the operator climbs or dips, and suddenly the remote only works when the gate is swinging one direction. We reset posts with deeper footings and re-level the operator, because shimming a heaved post fixes it for one season.
- Coastal soil corroding loop detectors. Slide gates on Beverly estate drives use buried loop detectors to sense vehicles. Salt runoff in the soil rots the loop wire and causes phantom open-and-close cycles. If your gate opens by itself at 3 a.m., that’s usually the loop, not a ghost.
- Keypad failure from housing that isn’t actually sealed. The buttons still click, but the membrane under them wicks salt moisture and the contacts bridge. We see it most on gates within a quarter mile of the water. Replacement with a properly gasketed unit solves it.
Pricing for Gate Access Control in Beverly, MA
Here’s what Beverly homeowners can expect to pay, based on the work we’ve done across 01915.
| Service | Typical Beverly Price Range |
|---|---|
| Keypad entry installation | $450 - $950 |
| Remote control receiver/transmitter replacement | $180 - $400 |
| Phone entry system retrofit | $800 - $1,600 |
| Card reader installation | $500 - $1,200 |
| Video intercom with gate station camera | $1,200 - $2,400 |
| Access control repair (diagnostic + fix) | $180 - $380 |
What moves the number is the condition of the wire run, whether we need to weld new mounting plates onto corroded posts, and whether the existing operator can talk to the new access hardware. A Beverly Farms gate with original ironwork usually needs a mounting plate fabricated on site, which adds $120-$250. Every estimate is free, in writing, and agreed before we turn a single screw. Call (877) 610-2993.
How Salt Air and Freeze-Thaw Actually Attack Beverly Gates
Beverly’s coastal estate neighborhoods, Beverly Farms and Prides Crossing, concentrate a density of historic ornamental and wrought-iron gates that you won’t find anywhere else on the North Shore. Those gates face relentless salt air off the Atlantic and Salem Harbor, and that marine environment accelerates corrosion of hinge barrels, mounting bolts, latch mechanisms, and any unsealed electrical connection far faster than inland towns like Danvers or Peabody. The failure mode is specific: salt air wicks into the tiny gaps where a hinge barrel meets its pin, corrosion builds from the inside out, and a gate that looks perfectly sound from the street is hollowed out under the paint. It takes torch work and mechanical probing to find it, not a quick visual check. If you own one of these gates, an annual inspection with a probe and a meter will catch failures before the gate drops or the keypad dies mid-storm.
Then the winter works the posts. Beverly sits on the water, and the ground here cycles through freezing and thawing 40 to 50 times a year. Shallow post footings heave a little each time. After a decade, an operator that was dead level is now running at a half-degree angle, and every access device feels the strain: remotes lose range because the antenna angle changed, keypads read intermittently because the mount flexes, and slide gates bind because the chain is no longer in plane with the rack. We see this every spring in the estate neighborhoods. The fix is digging the post to below the frost line and re-setting it properly, not shimming the operator to compensate.
We Also Serve Cities Near Beverly
Our crews handle Gate Access Control work throughout Beverly and in the surrounding communities: Beverly Cove, Salem, Peabody, and Danvers. If your property sits just over the line, schedule through our Beverly service area and we’ll get the same crew and the same 90-Day Done Right Promise. You can read more about the area on our Gate Access Control in Beverly page.
Serving Beverly, MA - Our Local Coverage Area
We’re based in the Beverly area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Beverly
Because salt air off Salem Harbor wicks into the microscopic gaps between hinge barrels and pins, between mounting bolts and brackets, and under the paint where the scrollwork joins. The corrosion starts inside those pockets and eats outward, so the gate looks solid until the hinge barrel finally splits or the bolt shears. This is the dominant failure mode on Beverly’s coastal estate gates, and it requires probing and torch work to diagnose. In Beverly Farms, our crew regularly finds hinge barrels rotted hollow under paint that’s just a few years old. Annual inspection with a probe and a meter catches it early. Call (877) 610-2993 and we’ll check yours before it fails.
They heave the post footings out of plumb, and a heaved post drags the operator, the chain, and every access device out of alignment. Beverly gets 40 to 50 freeze-thaw cycles a year because we sit on the water, and shallow footings move a little every cycle. After enough winters, the gate binds, remotes lose range, and the keypad reads intermittently. The fix is resetting the post below the frost line and re-leveling the operator. Not shimming a heaved post. That buys you one more season at best. Estimates are free: (877) 610-2993.
Yes. That’s the part of this work we genuinely enjoy. When we install a keypad, card reader, or intercom on a gate with original wrought-iron scrollwork, we fabricate the mounting plate on site to match the existing metal, then finish it so the new hardware looks like it belongs. We don’t bolt a white plastic box onto a 1908 iron gate and call it done. In Beverly Farms, our crew recently restored a custom ornamental swing gate where the hinge post had corroded hollow beneath the mounting plate. We removed the gate, cut out the rotted section, welded in new steel, matched the scrollwork, installed a FAAC operator, and tuned the rack and pinion to run silent. If you need period-matching work, call (877) 610-2993 and describe the gate. We can usually tell you over the phone what’s involved.
Because the antenna wire or its connector has almost certainly corroded from salt exposure. The operator still works, but the receiver can’t hear the remote until you’re right on top of it. On Prides Crossing properties, the antenna jacketing wicks salt moisture and the copper inside degrades even though the wire looks fine from outside. We splice in a new, properly sealed antenna and ground it against coastal conditions. That’s usually a $90 fix. If you’d rather not guess, call (877) 610-2993 and we’ll test the receiver on site.
UL 325 requires automatic gate operators to have at least two independent means of entrapment protection, typically a reversing mechanism plus a monitored safety device like a photocell, safety edge, or contact sensor. Beverly does not have a local gate ordinance that overrides UL 325, but the state fire code and your insurance both expect compliance, and any gate that hurts someone because the safety edge wasn’t wired is a liability that follows the property owner. We test entrapment protection on every automatic gate we touch in Beverly, and if your gate doesn’t meet UL 325, we’ll tell you plainly and quote the fix. The quote is free. The conversation is free. Call (877) 610-2993.
Call Gatewood Fence & Gate for Access Control in Beverly
If your Beverly gate needs a new keypad, a video intercom, a phone entry retrofit, or a remote that actually works from the street, call (877) 610-2993. You’ll reach a live person. We’ll schedule a real time window, quote the job in writing before anything starts, and stand behind the work with the 90-Day Done Right Promise. Hal’s name is on the shop and on every invoice. That’s the only guarantee that ever meant anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly since 2001.