Gate Repair in Beverly - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Beverly

A broken gate in Beverly isn’t just an inconvenience. It’s a security gap on a property you’ve spent years maintaining, and around here, the salt air doesn’t wait. Gate repair in Beverly, MA typically runs $180-$680 depending on whether we’re resetting a hinge post, replacing corroded hardware, or rebuilding a gate operator circuit board. Most calls get answered by a live person, and we’re usually at your gate within a day or two, often sooner. Call (877) 610-2993 and you’ll get Hal or someone from his crew, not a phone tree.

We’ve worked on gates from Cabot Street up through Beverly Farms and Prides Crossing for years now. The homes here aren’t interchangeable, and neither are their gates. A Victorian-era iron gate on Hale Street has different bones than a modern aluminum swing gate off Dodge Street, and the repair that fixes one will butcher the other. That’s why we show up, look at the actual gate, probe the actual hinges, and tell you what’s actually wrong before touching a tool.

Key Takeaways:
– Salt air off Salem Harbor corrodes gate hinges and bolts from the inside out in Beverly Farms and Prides Crossing
– Most Beverly gate repairs run $180-$680, quoted and agreed before any work starts
– We weld on site, so your gate stays in your driveway
– Live person answers the phone 24/7 at (877) 610-2993
– Every job carries the 90-Day Done Right Promise in writing

Why Gatewood Fence & Gate Is Beverly’s Preferred Gate Repair Company

Hal Gatewood started this shop in 2001 and never got around to franchising it. That means when you call about a sagging gate in Beverly, the person who answers knows the difference between a Prides Crossing estate gate and a Beverly Cove postage-stamp gate, because he’s worked on both. Our shop address is published, our license number is something you can look up, and the name on the invoice is the same name on the shop. That’s a rare thing in this trade.

Beverly homeowners call us because they’ve already been burned by a national outfit that quoted one price on the phone and charged another at the door. Hal’s approach is the opposite. The price is quoted and agreed before any work starts, in writing. If we find something unexpected mid-repair, we stop and show you, then you decide. Nobody gets a surprise invoice.

Response time to Beverly is measured in hours, not weeks. We carry a truck stocked with the common wear parts for the brands Beverly homeowners actually run: LiftMaster, FAAC, BFT, and the rest. That means we’re not “sourcing parts” for three days while your gate hangs open. For anyone inside 01915, there’s no trip charge. We just show up.

Our Gate Repair Services in Beverly

Hinge & Post Repair

A gate sags in the hinge post, not in the middle. That’s where we start. In Beverly, hinge posts lean over time because freeze-thaw cycles heave the footing out of plumb, and salt air eats the barrel from the inside. We cut out the old footing, pour deeper with proper drainage, and rebuild the hinge with marine-grade stainless pins so the gate swings true again. If the post is too far gone, we fabricate a replacement on site.

Weld & Rust Repair

Our welding is done in your driveway, not in some shop across town. For ornamental iron gates in Beverly Farms and Prides Crossing, that matters. Those gates carry scrollwork and details you cannot buy off a shelf. We cut out the corroded section, weld in new steel, and grind it smooth so the repair matches the surrounding work. Rust doesn’t get painted over and ignored. It gets removed, treated, and replaced if it’s gone too far.

Gate Realignment

A swing gate that binds against its latch post every March is a Beverly thing. The ground heaves, the post shifts a few degrees, and suddenly the gate won’t close without a shove. We reset the hinge geometry, shim or replace the posts, and recalibrate the operator so the gate runs quiet. Fix the panel without the post and you’ll fix it twice. We’ve seen it too many times to do it to you.

Electric Gate Repair

Coastal humidity is hard on gate electronics. Circuit boards, limit switches, and photocell terminals corrode faster in Beverly than in Danvers or Peabody, simply because the air is wetter and saltier. We diagnose the actual component that’s failing, replace or repair it, and usually have the gate operating the same visit. No swapping boards until something works. That’s parts cannon work, and Hal gets genuinely annoyed when he finds sloppy work somebody left behind.

Trusted Brands We Service in Beverly

We’re certified on nine major gate brands, including FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. What that means for you is simple: when your FAAC swing gate operator in Beverly Farms quits, we know the board layout and the common failure points without a learning curve. We keep common service parts in the truck for the brands Beverly runs most. You’re not waiting on a slow boat for a limit switch. And if you’ve got a Viking or BFT underground operator on a hidden driveway gate, that’s work we’re comfortable doing.

Common Gate Repair Problems We See in Beverly Homes

• Internal hinge corrosion that looks fine from the outside. In Beverly Farms, we regularly find ornamental iron hinge barrels that are hollow inside, eaten by decades of salt air wicking into the gaps. The gate looks solid from the street, but a hard gust of wind will shear the hinge. Probing with a pick tells the truth.
• Spring heave on swing gates. Beverly’s 40 to 50 freeze-thaw cycles a year work on shallow post footings like a jackhammer. Every March, swing gates start binding against their latch posts. The repair is resetting the hinge geometry and re-anchoring the post deeper, not shaving the gate edge.
• Operator boards corroded by salt humidity. Gate operator circuit boards on coastal estates corrode at the terminals, causing intermittent failures that come and go with the weather. A board that resets when it warms up is a board that’s corroded, not haunted. We test, clean, and rebuild or replace.
• Rack and pinion binding on slide gates. When a hinge post leans even a few degrees, a slide gate’s rack and pinion binds and the operator throws force errors. The fix isn’t oiling the track. It’s correcting the post that moved. We see this all the time on automated drive gates along Beverly’s older estate properties.

Pricing for Gate Repair in Beverly, MA

We Also Serve Cities Near Beverly

If you’re in Beverly or just down the road, we cover the whole area: Beverly Cove, Salem, Peabody, and Danvers. Same live person on the phone, same 90-Day Done Right Promise, same owner-operated shop. Some towns have different gate failure patterns than Beverly, which is why local knowledge matters more than franchise scale.

FAQs - Gate Repair in Beverly

Why do my Beverly Farms ornamental iron gates keep rusting through at the hinges within a few years of painting them?

Because the corrosion isn’t starting on the surface; it starts inside the hinge barrel, where salt air wicks into the gap and eats the metal from within. Painting the outside does nothing to stop it. The fix is disassembling the hinge, replacing the internal pin with marine-grade stainless, and treating the bore before reassembly. We do this regularly for gates along Beverly’s coastal estates. Call (877) 610-2993 and we’ll probe your hinges and tell you if they’re hollowing out.

Can you match the original Victorian scrollwork on a Prides Crossing estate gate when a hinge end is too far gone to repair?

Yes. We weld on site and fabricate replacement sections by hand. When a hinge end is beyond saving, we cut out the corroded piece, form a new one to match the original profile, and weld it in so the repair disappears into the surrounding work. Off-the-shelf hardware won’t do for a historic Prides Crossing gate, and we don’t pretend it will.

Why does my automatic swing gate in Beverly open fine all summer but start binding and tripping the safety edge every March?

The ground froze and thawed forty times over the winter and moved your gate post a few degrees. The gate is binding against the latch post, and the operator’s safety edge reads it as an obstruction. The fix is re-anchoring the post and resetting the hinge geometry, not adjusting the safety edge sensitivity. We see this every spring in Beverly.

Do you work on underground gate operators for hidden driveway gates on Beverly coastal estates?

Yes. Underground operators on Beverly’s coastal estates take a beating from salt-laden humidity and groundwater. The motor box, the arm, and the control runs all need service and occasional replacement. We’re certified on FAAC, BFT, Viking, and Linear operators, including underground models. The repair starts with figuring out whether the failure is mechanical, electrical, or both.

My LiftMaster slide gate operator near the water in Beverly keeps throwing a ‘force reversal’ error even after I oil the track. Is the salt air killing the board?

Probably not the board. A force reversal error on a slide gate near the coast is usually the rack and pinion binding because a post has shifted. The salt air is wrecking the post hardware, not the logic board. The real fix is correcting the post and the hinge geometry. We’ll come out, probe the post, and show you exactly what moved. Call (877) 610-2993 for an exact quote, estimates are free.

How Salt Air Destroys Beverly Gates From the Inside Out

In Beverly’s Prides Crossing and Beverly Farms, marine salt air wicks into the tiny gaps of ornamental iron hinge barrels and mounting bolts, corroding them hollow from the inside out. The failure is invisible to a visual inspection. It demands probing with a pick and oxy-acetylene torch work, not just a hardware swap. This salt-driven internal corrosion is unique to Beverly’s direct Atlantic exposure. It does not affect inland North Shore towns like Danvers or Peabody the same way. A gate that looks solid here may be minutes from shearing a hinge, and we’ve learned not to trust appearances.

We got called to a Victorian-era estate gate in Beverly Farms that had a LiftMaster slide gate operator struggling and tripping its safety photocell. The gate looked perfectly plumb, but when we probed the hinge post, the mounting bolts were corroded hollow from decades of salt air. The post had shifted just enough to bind the rack and pinion. We cut out the old post footing, poured a new one with extra depth, and rebuilt the hinge barrels with marine-grade stainless pins before recalibrating the operator. It now runs silent and true.

The lesson: in Beverly, you don’t diagnose a gate with your eyes alone. You probe, you measure, you test. That’s the difference between a repair that lasts and a repair that fails in a year. And it’s why our Gate Repair work starts with real diagnosis, not a quick visual.

Call Gatewood Fence & Gate for Beverly Gate Repair

If your gate is sagging, binding, rusty, or just plain dead, call (877) 610-2993. You’ll get a live person, not a voicemail. We’ll set a time, show up, and tell you what’s wrong before we touch anything. The price is agreed before work starts. The work is done in your driveway, not hauled off somewhere. The 90-Day Done Right Promise is written on every job, and if something isn’t right, one call brings Hal back. No runaround.

The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly since 2001.