Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Beverly Cove, MA
Gate repair in Beverly Cove typically costs $180 to $600 depending on whether you’re fixing hinges, welding a cracked frame, or replacing a salt-fried control board. Most repair calls in the 01915 ZIP are scheduled within one business day, and a live person answers the phone at (877) 610-2993 any hour. We’re Gatewood Fence & Gate, and Hal Gatewood has been fixing gates on the North Shore since 2001. The harbor here works on metal harder than almost anywhere else in Massachusetts, which means the person who shows up needs to know why your hinges failed in three years instead of fifteen.
Why Beverly Cove Homes Are Different
Beverly Cove sits directly on Beverly Harbor, making it one of the most salt-air-exposed residential pockets on the North Shore. Gates here face a relentless marine corrosion environment that inland Massachusetts simply doesn’t replicate, not even in neighboring Beverly neighborhoods a mile from the water.
The housing stock tells the same story. Many homes date from the late 1800s to the mid-1900s, with legacy ornamental iron or painted steel gates that predate modern corrosion-resistant alloys entirely. Standard galvanized hardware specified for inland installs fails visibly within three to five years here, a pattern we document on almost every harbor-facing property. Massachusetts freeze-thaw winters compound the damage: salt accelerates oxidation year-round, then trapped moisture freezes inside corroded hinge barrels and gate posts, cracking welds and seizing pivot points. That’s why we specify marine-grade 316 stainless fasteners and aluminum framing as the practical local standard, not an upgrade.
Gate Repair in Beverly Cove
Gate repair in Beverly Cove means dealing with salt air first and everything else second. A gate that would last fifteen years in Danvers can start seizing at the hinges inside of three here, because the harbor works on metal all day and all night. We answer the phone around the clock at (877) 610-2993, and we’ll give you a straight answer about whether to fix or replace.
Electric Gate Repair
Electric gates in Beverly Cove die from corrosion more than from wear. The control board sits in a housing, but salt air finds its way in, and conductive salt deposits bridge low-voltage terminals to short the board. We diagnose it on site, in your driveway, and we replace only what actually failed. Electric gate operator repairs, including a new control board or limit switch, usually land between $250 and $600. If a board is shot, we’ll tell you why and show you the replacement before we order it. You’ll know the price before we touch it.
Hinge and Post Repair
The hinge post is where Beverly Cove gates fail first. Galvanized hinge pins and barrel hinges seize within three to five years as salt spray accelerates electrolytic pitting at the steel-to-steel contact point. We see it all over the Cove, especially on the older ornamental iron gates that came with the houses. A typical hinge or post repair in Beverly Cove runs $180 to $450, depending on whether the post needs re-bedding or just new hinge pins. The fix is often 316 stainless hinge pins and a properly bedded post, not a new gate. Hal’s rule holds here: fix the panel without the post and you’ll fix it twice.
Weld and Frame Repair
On painted steel gates, freeze-thaw cycles force salt-laden moisture into micro-pits along the weld seams. Every winter the water freezes and expands, and eventually the weld cracks at the bottom rail. We grind the old weld out and lay a new one in your driveway, then treat the surrounding steel before painting. Weld and rust repair on a painted steel gate frame typically runs $150 to $400 per section, depending on how far the rot has spread. We don’t haul your gate to some shop across the county. Gate Repair is what we do every day, and on the coast we do it differently.
Why do gate hinges fail so fast in Beverly Cove compared to inland neighborhoods?
It’s the salt spray. Beverly Cove sits directly on Beverly Harbor, and the constant moisture-laden salt air drives electrolytic pitting into galvanized hinge pins and barrel hinges. That corrosion runs the clock at three to five years here, versus ten to fifteen years a mile inland. The fix is marine-grade 316 stainless hinge pins and hardware, not another round of galvanized parts. Call (877) 610-2993 for an exact quote - estimates are free.
My LiftMaster swing gate operator died after 4 years near the harbor - is that normal?
In Beverly Cove, unfortunately yes. Salt-laden air penetrates the operator housing and deposits a conductive film across the low-voltage terminals, shorting the board long before the motor wears out. We replace the board, clean the terminals, and use dielectric grease to slow the next round of corrosion. You shouldn’t have to buy a new operator every four years. Call (877) 610-2993 for a quote - the estimate is free and the price is agreed before we start.
Gate Installation in Beverly Cove
A new gate in Beverly Cove typically runs $2,800 to $9,500 installed, depending on the gate type, size, and whether you need a motorized operator. We quote every job upfront, in writing, before any work starts, and we stand behind each installation with our 90-Day Done Right Promise. If you’re near Beverly Harbor on Lothrop Street, Hale Street, or up off Corning Street, we can usually have Hal or one of his crew out to measure within a day or two.
Driveway Gate Installation
Driveway gates in Beverly Cove are frequently wider and heavier than what you’d spec for an inland lot, partly because many older estate-style properties have long, curved approaches. We fabricate and install single and double driveway gates sized to your posts and slope. A single driveway swing gate usually lands between $2,800 and $5,500, while a double driveway gate with operators starts around $6,000 and can reach $9,500 or more for wide, heavy panels on waterfront lots. A gate that sags in the hinge post, not the middle, is where every failure starts, so we start there too.
Pedestrian Gate Installation
Pedestrian gates along Hale Street, Lothrop Street, and the smaller lanes off Corning see constant use and constant salt mist. Standard zinc-plated hardware specified for inland installs fails visibly within three to five years here, so we use marine-grade stainless hinges and latches without even asking. A pedestrian gate in Beverly Cove typically runs $900 to $2,800, depending on whether it’s a simple aluminum frame or a custom ornamental match. Cutting corners on hardware near the harbor is the most expensive mistake you can make.
Sliding Gate Installation
Sliding gates work well where Beverly Cove driveways pitch or where snow makes a swing gate impractical. We install cantilever and V-track sliders with sealed bearing trucks that hold up to grit and salt. Sliding gates sit in a similar range to driveway swings, usually $3,500 to $7,500, with the operator included in most quotes. The operator needs a fully sealed enclosure, because chloride-driven corrosion on limit switches and circuit boards is the number one reason sliders die early around here. Gate Installation in this ZIP means planning for the harbor from day one.
How does the salt air affect the choice of hinge post for a new swing gate?
Salt air in Beverly Cove means you should never spec a standard zinc-plated steel hinge post. The chloride in the air accelerates oxidation, and once the post seizes or cracks, the whole gate is compromised. We use marine-grade stainless hinge posts, often with welded gussets, and we set them deeper than an inland install to survive repeated freeze-thaw cycles. This is the single biggest factor in whether a new swing gate lasts. Call (877) 610-2993 to schedule a measure - it’s free.
Can you install a gate that matches older ornamental ironwork in Beverly Cove?
Yes. We regularly fabricate and install gates that match the original ornamental ironwork on Beverly Cove’s older coastal homes. We can salvage, repair, and replicate scrollwork, picket profiles, and through-bars to keep the new gate looking like it’s always been there. The price depends on the complexity of the match and the metal choice - we’ll quote it in writing before any work starts. Call (877) 610-2993 for an estimate.
Gate Motor & Opener in Beverly Cove
When a gate opener fails in Beverly Cove, it usually isn’t the motor itself that died. It’s the salt. A control board that works fine ten miles inland is getting a steady diet of airborne salt off Beverly Harbor here, and that changes which parts fail, how fast they fail, and what actually fixes them. We know because we’ve been opening control boxes in this neighborhood long enough to see the pattern repeat itself. Call (877) 610-2993 and a live person answers.
Motor Repair and Replacement
By the time a homeowner calls us, the gate usually hasn’t failed all at once. It’s been intermittent for a few weeks: sometimes the remote works, sometimes it doesn’t. That pattern is almost always the control board. When we open the box, the low-voltage terminals are green with oxidation. Motor repair for control board or limit switch replacement typically runs $240 to $420, while gear assembly or arm work lands between $280 and $520. We replace the board with a marine-rated unit, seal the enclosure properly, and test the limits before we leave.
Full Operator Installation
A new operator on a Beverly Cove gate isn’t just a swap. We check the hinge posts first, because if the post is rotted or the hinge barrel has seized, a brand-new motor will burn itself out trying to push a gate that won’t move freely. We set the posts right, then mount the operator, wire the controls, set the limits, and program your remotes and keypad. A full motor installation in Beverly Cove, including operator, hardware, and programming, typically runs $850 to $1,800 depending on gate size and access control features.
Slide Motor and Battery Backup
Slide gates catch the freeze-thaw cycle hard in Beverly Cove. When moisture gets into the track, it freezes overnight, and the motor tries to drag the gate over ice. Slide motor replacement and installation typically runs $900 to $1,600. For power outages during nor’easters, we recommend battery backup almost universally on harbor-side properties. Battery backup installation in Beverly Cove runs $380 to $650, and it’s the only reason some of our customers can get in and out during a three-day outage. Gate Motor & Opener service here means thinking about salt and storms together.
Why does my gate operator need a marine-rated control board instead of a standard one?
Because Beverly Harbor is throwing salt at your control board every day, and a standard board’s connectors corrode in four to six years here instead of ten or more inland. A marine-rated board uses sealed connectors and conformal-coated circuitry, which is the difference between a repair and a premature replacement. Call (877) 610-2993 for a free estimate - we’ll show you the board and quote the price before any work starts.
Does battery backup make sense in Beverly Cove given our nor’easter power outages?
Yes, and for a harbor-side property it’s the single most useful add-on to an existing gate motor. A nor’easter takes out the power, and a gate without battery backup is stuck open or shut until utility crews finish. A battery backup runs the operator for a set number of cycles and recharges when the grid returns. Call (877) 610-2993 to discuss whether your current operator can accept one.
Gate Access Control in Beverly Cove
Gate access control in Beverly Cove means more than a keypad bolted to a post. The salt air off Beverly Harbor eats standard hardware in three to five years, and the older ornamental gates along Lothrop Street and Paine Avenue need systems that can handle marine exposure without constant failure. We install, repair, and upgrade keypad entry, remote controls, phone entry, card readers, and video intercoms specifically for homes in the 01915 ZIP code. Hal Gatewood has been at this since 2001.
Keypad and Phone Entry
A keypad entry system in Beverly Cove has to be built for salt exposure or it’ll fail at the mounting plate within a few winters. We install marine-grade stainless keypad housings with sealed electronics, and we replace corroded powder-coated units with hardware actually rated for coastal use. A keypad entry installation in Beverly Cove typically runs $650 to $1,400, depending on whether we’re replacing an old unit or running new wiring. Phone entry systems typically run $900 to $2,200, letting you buzz a visitor through from your cell even when you’re not home.
Video Intercom
Video intercoms are the standard for Beverly Cove’s larger properties, especially the estate-style homes near the water where you can’t see the gate from the house. We install and service Viking intercoms matched to existing gate operators, wired and wireless. A video intercom system, including the monitor and gate station, usually lands between $1,800 and $3,400 for Beverly Cove’s larger property layouts. The salt air here means we pay close attention to the camera housing seal and connector corrosion protection, which is what actually determines whether the system lasts three years or twelve.
Card Reader Systems
Card readers make sense for Beverly Cove homes with staff, multiple drivers, or a rental unit on the property. We install proximity readers that work with existing gates and integrate with keypad and intercom systems. For a neighborhood like this, where driveways are tight and gates are often ornamental iron from the 1920s, we mount readers where they won’t clash with the original look, usually on a discreet pedestal or post. Card readers start around $800 for a single-door homeowner setup. Gate Access Control in this ZIP is about matching the technology to the house and the harbor both.
Can you retrofit my older gate with modern safety systems without replacing the whole operator?
Yes, and we do it regularly in Beverly Cove. The gate itself is often perfectly good, especially if it’s heavy iron built before hollow aluminum became common. What needs upgrading is the safety compliance: photo-eyes, edge sensors, and the operator’s internal entrapment protection. We can mount new safety devices on a 1980s gate, wire them to a current UL 325-compliant operator, and leave the original ironwork intact. Call (877) 610-2993 for a free estimate.
My phone entry stopped working after a nor’easter - is that fixable?
Usually yes, and it’s usually brine in the control board, not a failed keypad. We diagnose it on site, clean or replace the affected components, and reseal the enclosure better than we found it. The price depends on whether we’re cleaning terminals or replacing a board, and we’ll quote it in writing before any work starts. Call (877) 610-2993 - estimates are free.
Gate Parts & Welding in Beverly Cove
If you live near the harbor in Beverly Cove, you’ve probably watched your gate hardware rust faster than anything else on your property. Gate parts and welding here have to be done differently than in Salem or Peabody. The salt spray off the water gets into hinges, latches, welds, and operator boards in ways that simply don’t happen a mile inland. We’re Gatewood Fence & Gate, and our welding crew handles this every week. Call (877) 610-2993.
Hinge Replacement and Weld Repair
In Beverly Cove, hinge failure is the most common reason a gate starts dragging or stops closing square. Older ornamental iron gates from the early and mid-20th century often have steel-on-steel hinges that have been absorbing salt air for decades. We replace hinge hardware and weld-reinforce the mounting pads so the new hinges don’t inherit the old corrosion. On a harbor-facing street, we typically price a full hinge replacement with weld prep and marine-grade hardware at $180 to $340 per hinge, depending on gate weight and access. A gate sags in the hinge post, not in the middle.
Post and Rail Repair
A corroded post footing in Beverly Cove is a different animal than the same failure in Danvers. The freeze-thaw cycle around the harbor pushes moisture into the footing, and the salt accelerates every bit of rust it finds. Post replacement in Beverly Cove usually runs $450 to $900 per post, including footing work and welding. Bottom rails take the brunt of standing water, road splash, and salt thrown up from driveways in winter. Typical rail repair runs $150 to $400 depending on rail length and how far the corrosion has traveled up the verticals.
Custom On-Site Welding
Not every Beverly Cove gate needs a part we can pull off a shelf. Some need a repair that matches the original ironwork. Hal welds on site, which means the gate stays in your driveway. We don’t haul it to some shop across the county, and we don’t tell you to buy a new gate because a mid-century painted steel panel cracked at a hinge weld. Custom welding in Beverly Cove typically runs $220 to $500 for a single repair point, and we can match the weld profile to the original work. Gate Parts & Welding is where we fix what other companies want to replace.
Can you weld repair an original early-1900s iron gate, or does salt damage require full replacement?
Yes, we can weld repair most original early-1900s iron gates in Beverly Cove. The key is assessing how much structural thickness remains. If the gate has localized cracks at hinge welds or a corroded bottom rail, we grind back to clean steel, weld repair, and reinforce the load path. Full replacement is only the honest recommendation when the frame has lost enough wall thickness that welding won’t hold. Call (877) 610-2993 for a free inspection and written estimate.
Why do my gate hinges seize up every spring even after greasing?
Your hinges seize every spring because salt from Beverly Harbor gets between the hinge pin and barrel, where it corrodes and scores the bearing surface. Grease applied on the outside never reaches the scored interface. The fix is hinge disassembly, cleaning, and either re-honing or replacing the hinge with marine-grade stainless. Call (877) 610-2993 for an exact quote - estimates are free.
Brands We Service in Beverly Cove
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing operators locally, which means most Beverly Cove repair calls don’t wait on shipping. If your operator is one of these brands, we can usually diagnose and fix it in one visit. our brands
Pricing for Gate Repair in Beverly Cove, MA
| Service | Typical Range in Beverly Cove |
|---|---|
| Hinge replacement or repair | $180 - $450 |
| Weld repair on frame or panel | $150 - $400 |
| Gate motor / control board repair | $250 - $600 |
| Full gate realignment with hinge work | $200 - $500 |
| Pedestrian gate installation | $900 - $2,800 |
| Single driveway swing gate | $2,800 - $5,500 |
| Double driveway gate with operators | $6,000 - $9,500 |
| Sliding gate with operator | $3,500 - $7,500 |
| Full operator replacement and install | $850 - $1,800 |
| Slide motor replacement and install | $900 - $1,600 |
| Battery backup system install | $380 - $650 |
| Keypad entry installation | $650 - $1,400 |
What pushes price up in Beverly Cove is the marine-grade hardware and sealed enclosures that are standard here, not optional. Every quote is written and agreed to before any work starts - no surprises at the door, no invoice bigger than the estimate.
Neighborhoods We Serve in Beverly Cove
We work throughout the 01915 ZIP, from the waterfront streets near Lynch Park up through the hills off Cabot Street. Typical response time for a repair visit in Beverly Cove is one business day, and emergency calls get a live person no matter the hour.
- Lynch Park and Dane Street Beach area
- Brackenbury Lane and Ober Street
- Corning Street and the harbor side
- Near Beverly Yacht Club and Water Street
- Cabot Street corridor
Service Area - Cities Near Beverly Cove
We serve Beverly, MA and Beverly Cove, MA directly, with regular calls to Salem, MA, Peabody, MA, Danvers, MA, and Marblehead, MA. Dispatch and scheduling are coordinated from our Boston office, but the crew that shows up at your gate knows the North Shore coast and what salt does to metal here.
Serving Beverly Cove, MA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Beverly Cove and the communities around it; dispatch is coordinated from our Boston office. The map shows the Beverly Cove coverage area; if your address is on it, we can help.
Also serving nearby: Beverly, MA, Beverly Cove, MA, Salem, MA, Peabody, MA, Danvers, MA, Marblehead, MA.
FAQs About Gate Repair in Beverly Cove
Most gate repairs in Beverly Cove don’t require a permit, but new installations or structural post replacements sometimes do depending on your property’s zoning. We check local requirements during our site visit and will tell you straight if a permit is needed. If it is, we handle the paperwork as part of the job. Call (877) 610-2993 to schedule a free estimate.
Most repair visits in the 01915 ZIP are scheduled within one business day, and emergency calls get a live person on the phone 24 hours a day. We don’t use a dispatch queue or call center - you talk to someone who can actually get Hal or his crew moving. For true emergencies, we’ll tell you honestly whether we can make it today or first thing tomorrow.
Yes, we regularly coordinate with HOAs for gate repairs and installations in Beverly Cove’s planned communities and estate properties. We provide written estimates, proof of insurance, and documentation of marine-grade materials specified, which most associations require for exterior work. The price we quote is the price the HOA sees - no add-ons after approval. Call (877) 610-2993 to discuss your HOA’s requirements.
Call (877) 610-2993 for a free estimate on any gate repair, installation, motor service, access control, or welding work in Beverly Cove. A live person answers around the clock, and Hal Gatewood stands behind every job with the 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Cove Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu