Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Beverly Cove
Gate repair in Beverly Cove, MA deals with one problem more than any other: salt. We work on gates all over the North Shore, and the ones within a half-mile of Beverly Harbor corrode years faster than anything we see inland. That means hinges seize, posts rot at the footing, welds crack, and operator boards fail on a schedule no manufacturer’s warranty predicts. If your gate is dragging, sticking, refusing to open, or shutting down at random, call us at (877) 610-2993. We live for this work, and we’ll tell you straight what can be fixed on site and what actually needs replacing.
Why Gatewood Fence & Gate Is Beverly Cove’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001, and the name on the shop has been the same ever since. We’re not a franchise, not a middleman, and not a different crew every time you call. The person who answers the phone is a real person, 24/7, and the person who shows up at your driveway knows what salt air does to a DoorKing arm or a Viking control board. Beverly Cove homeowners have our number for a reason: when a gate goes down on a Shore Drive property at 9pm, they don’t want a call center three states away. They want someone who can be there, diagnose the problem, and tell them the truth about what needs doing.
We’ve built our reputation in Beverly Cove one gate at a time. People here talk. They compare notes at the hardware store and over the fence. A company that quotes one price over the phone and shows up with a different invoice doesn’t last long in a community this tight. We quote our price up front, in writing, before any work starts, and that’s the price. Every repair carries our 90-Day Done Right Promise, stamped on the invoice, not buried in fine print. If it’s not done right, we make it right. One call brings Hal back, no runaround.
Our Gate Repair team carries marine-grade stainless fasteners, aluminum framing stock, and the parts Beverly Cove gates actually need. We don’t waste your time ordering basic galvanized hardware that’ll be seized again in three years. We stock what lasts on the harbor side.
Our Gate Repair Services in Beverly Cove
Most of the calls we take in Gate Repair in Beverly Cove start with one of four problems. Here’s what we do about each.
Electric Gate Repair
Electric gates in Beverly Cove fail most often at the connection points and the brain, not the motor itself. Salt air finds its way into control boards, limit switches, and junction boxes, then freeze-thaw cycles do the rest. We’ve replaced corroded limit switches on LiftMaster and Ghost Controls operators on Shore Drive properties where the motor was otherwise fine. The fix is often smaller and cheaper than the homeowner expected, and it keeps your gate running without tearing out the whole system.
Automatic Gate Repair
An automatic gate that opens halfway, reverses for no reason, or stays open at random is usually telling you something specific. In Beverly Cove, that something is frequently moisture in the operator housing. We troubleshoot the full system: control board, safety photocells, loop detectors, remote receivers, and Gate Access Control in Beverly Cove. We don’t swap parts on a guess. We find the actual fault, show you what we found, and quote the repair before we touch a tool.
Hinge & Post Repair
This is the big one for Beverly Cove. A gate sags in the hinge post, not in the middle, and harbor salt rots hinge posts faster than anywhere else we work. We recently rebuilt a swing gate on a Shore Drive property where the hinge post had rotted through at the footing from trapped salt moisture. After cutting out the failed post, we set a new steel post with a poured concrete footing and marine-grade stainless fixings using our Gate Parts & Welding in Beverly Cove, then realigned the gate and replaced the LiftMaster operator’s corroded limit switches. That gate will outlast the old one by decades because we fixed it at the root, not the symptom.
Gate Realignment
A gate that scrapes the ground, catches on the latch, or drifts closed on its own is misaligned, and in Beverly Cove the cause is almost always rust-driven settling at the hinge line. We bring the gate back to true, reinforce the hinge points, and set the operator travel limits correctly. A realigned gate closes clean, seals tight, and stops chewing through operator gears. Fix the panel without the post and you’ll fix it twice. We fix it once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Cove
We service all nine of the major gate brands, and in Beverly Cove we see a lot of Viking, DoorKing, and Elite operators. These are good machines. The problem isn’t the brand; it’s what the harbor does to the install. We carry the common Viking and DoorKing parts for 01915 jobs, so we’re not waiting on a distributor when your gate is down. Whether your system is a Ghost Controls residential opener or a commercial Elite slide gate, we know the wiring, the torque settings, and the failure points for our Gate Motor & Opener in Beverly Cove.
Common Gate Repair Problems We See in Beverly Cove Homes
- Galvanized hinges rust solid within 3-5 years. The salt spray off Beverly Harbor works into the hinge barrel, seizes the swing gate, and the motor burns out trying to move it. Marine-grade stainless hinges are the fix, not a stronger motor.
- Powder-coated steel frames blister along the bottom rail. Moisture creeps under the coating where salt has already started pitting the steel. Within five years the frame loses structural integrity at the welds, and the gate starts to sag rail-by-rail.
- Safety photocells and loop detector housings crack open in freeze-thaw cycles. Salt intrusion gets inside the housing, winter freezes it, and the expansion cracks the casing. The gate then false-stops or goes dead entirely.
- Operator control boards corrode at the terminals. This is the one homeowners least expect. The gate worked fine in September, then failed in February. The board terminals corroded slowly for years, then a cold snap finished the connection.
Pricing for Gate Repair in Beverly Cove, MA
We don’t hide behind “it depends” and we don’t quote one number on the phone and another at the door. Here’s what Beverly Cove gate repair typically costs:
- Hinge & post repair: $280-$650, depending on whether the post needs cutting out and re-setting or just new hinge hardware
- Weld & rust repair: $150-$400 per section, done on site in your driveway
- Electric gate repair: $180-$500, including control board, limit switch, or wiring repairs
- Gate realignment: $140-$260 for most residential swing gates
The final price is quoted and agreed before any work starts. You’ll see it in writing, and that’s what you pay. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Seniors and veterans save 10% permanently. Call (877) 610-2993 and we’ll give you a straight number.
We Also Serve Cities Near Beverly Cove
While most of our work is right here in Beverly Cove, we also serve Beverly Cove neighbors in Beverly, Salem, Peabody, and Danvers. Same live-person phone answer, same 90-Day Done Right Promise, same owner-operated crew. If your gate is down and you’re anywhere nearby, call us.
Serving Beverly Cove, MA - Our Local Coverage Area
We’re based in the Beverly Cove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Beverly Cove
Beverly Cove homeowners see hinge failure in three to five years because Beverly Harbor’s persistent salt spray settles directly on exposed metal hardware and stays there. A mile inland, the salt concentration in the air drops off sharply, so the same galvanized hinge might last ten years. On the harbor side, we install marine-grade stainless hardware as standard, because the standard inland spec simply doesn’t survive. Call (877) 610-2993 and we’ll tell you exactly what’s on your gate and how fast it’s failing.
Yes, and we do it regularly in Beverly Cove. We cut out the rotted post at its base, set a new steel post in a poured concrete footing, and weld or bolt the existing gate back onto it with marine-grade stainless fixings. It’s a half-day job in most cases, and it’s dramatically cheaper than a full gate replacement. The key is catching it before the post rots through into the hinge mounting entirely, because a post that’s gone at the footing also twists the gate frame over time.
Within a half-mile of Beverly Harbor, we recommend 316 marine-grade stainless steel for all fasteners and hinge hardware, and either aluminum framing or hot-dip galvanized steel with a factory-applied powder coat for the frame itself. Basic galvanized hardware, the kind specified for inland installs, fails visibly in this ZIP code within three to five years. The extra material cost is modest, and it’s the difference between repairing a gate every few years and not thinking about it for a decade or more.
Salt moisture seeps into the operator housing, the control board, and the safety photocell casings year-round. When Massachusetts winter arrives, that trapped moisture freezes and expands, cracking housings and breaking solder joints on control boards. The result is a gate that worked fine in the fall and dead-stops in February. It’s why we recommend marine-sealed enclosures for harbor-front properties and why we always check for moisture intrusion when we open up a dead operator in Beverly Cove.
If you’re within a half-mile of Beverly Harbor, even a block or two back from the water, yes. The salt spray carried off the harbor reaches well past the waterfront, and the older coastal homes on the established lots throughout 01915 have gate installations that were not originally specified for any salt exposure at all. If your gate is already showing rust bloom on the hinges or blistering on the bottom rail, marine-grade hardware will stop the cycle. If it hasn’t started yet, marine-grade hardware will delay it for years. Call (877) 610-2993 and we’ll take a look and tell you honestly whether your specific gate needs the upgrade now or can wait.
If your gate is down, dragging, or making a sound it never made before, don’t wait until the post rots through or the operator burns out. Call (877) 610-2993 for a free estimate. A real person answers, day or night. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Cove and the surrounding North Shore.