Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Cove
A new gate in Beverly Cove usually runs between $2,800 and $14,000 installed, with the final number set by the gate’s size, material, and operator type before we ever order a part. That price gets agreed on in writing before any work starts, so the number you sign is the number you pay. We serve every street in Beverly Cove, from Lothrop Street down to the harbor side, and Hal Gatewood has been doing this work since 2001. Call (877) 610-2993 and you’ll get a live person, not a menu.
Why Gatewood Fence & Gate Is Beverly Cove’s Preferred Gate Installation Company
The thing about installing gates in Beverly Cove is that the harbor eats hardware. Standard galvanized hinges that would last fifteen years in Danvers will be pitted and cracking in five years here, and we plan for that from day one. Our crew knows what Lothrop Street’s salt spray does to a powder-coated post cap because we’ve replaced enough of them to see the pattern. When a Beverly Cove customer calls about a sagging gate or a dead operator, we show up knowing the likely culprit before we even pull in the driveway.
Hal’s name is on the shop and on every invoice, and that matters in a town like Beverly Cove where neighbors talk. We don’t hide behind a brand or a call center three states away. You call, you get a real person, and if you want to meet the person who’ll be doing the work, you can shake Hal’s hand when he arrives. Every job carries our 90-Day Done Right Promise in writing, so if something’s not right, one call brings us back.
Beverly Cove homeowners don’t want a crew that treats their property like a line item. They want someone who’ll take the time to set a heavy custom gate so it swings true ten years from now. That’s the job we do.
Our Gate Installation Services in Beverly Cove
We handle Gate Installation for every property type in Beverly Cove, from modest side-yard pedestrian gates to fifteen-foot ornamental driveway entries. Here’s what we install most often in this harbor-side pocket of the North Shore.
Driveway Gate Installation
Driveway gates in Beverly Cove fall into two camps: the older painted-steel gates on 1920s estates that have survived decades of salt air, and newer aluminum or steel installs that weren’t specced for marine exposure and are already failing. We build and hang driveway gates with marine-grade stainless hinges and fasteners as the default, not an upsell. A typical single driveway gate install in Beverly Cove runs $3,200 to $7,500, and a double gate starts closer to $6,000 because you’re doubling the leafs, the hinges, and the hardware.
Swing Gate Installation
Swing gates are the classic Beverly Cove look, especially on older homes with brick or fieldstone piers. The challenge here is weight and wind. A solid wood or ornamental steel swing gate catches harbor wind like a sail, and undersized hinge posts will work loose inside two winters. We set posts deep, use stainless hardware, and size operators by actual gate weight and width, not a generic chart. If a swing gate is cast iron and pushing a thousand pounds, we tell you that straight and build accordingly.
Sliding Gate Installation
Sliding gates make sense on Beverly Cove properties where a swing gate would arc into a sloped driveway or block a walkway. They need a level track or a cantilever design that rides clear of debris, and in Beverly Cove that debris includes sand and salt crust tracked off the beach roads. We install and service both ground-track and cantilever sliding gates, and we’re honest about which one makes sense for your lot. A cantilever sliding gate runs $4,800 to $11,000 in Beverly Cove depending on length and operator.
Pedestrian Gate Installation
A well-built pedestrian gate next to a wide driveway gate can save your operator years of cycles, and that’s a real consideration when salt air is already working against you. We install walk gates that carry their own posts and don’t hang off the driveway gate’s frame, which is a common shortcut we see and refuse to repeat. A powder-coated aluminum pedestrian gate with a quality latch and closers typically lands between $950 and $2,400 in Beverly Cove.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Cove
We’re certified on nine major gate and operator brands, and for Beverly Cove salt-air properties we lean on the ones that have proven themselves near the harbor. Ghost Controls and Linear make operators with sealed boards and better weather gaskets than most, and Viking’s heavier gearboxes handle the weight of a big swing gate without burning out. We keep common parts for these brands close by, which matters when a motor fails in January and your gate is stuck open. The brand matters less than the install, but starting with equipment that can shrug off salt air is half the battle.
Common Gate Installation Problems We See in Beverly Cove Homes
- Hinge post failure from marine corrosion. Standard galvanized hinges and posts on Beverly Cove properties start failing in three to five years, not the fifteen you’d expect inland, and the gate sags as the post itself rots at ground level. We replace posts with marine-grade stainless or heavy-wall aluminum set in concrete, not just swap the hinge.
- Freeze-thaw cracking in older ornamental iron. Water gets into hairline rust pockets on an old estate gate, freezes, expands, and splits the weld. Beverly Cove’s hard winters and damp harbor air hit older wrought-iron gates harder than almost anywhere in Essex County.
- Salt intrusion in under-spec’d operators. A non-marine-rated opener with a poorly sealed housing will short out or seize, leaving a heavy custom gate stuck mid-cycle facing the harbor. We see it on Beverly Cove driveways every single winter.
- Shallow post footings from the original install. Many older Beverly Cove gates were set with shallow footings decades ago, and the combination of sandy soil near the water and heavy leafs has them leaning. We dig deeper footings, set posts in concrete, and re-hang the gate so it stays plumb.
Pricing for Gate Installation in Beverly Cove, MA
Here are real numbers for Beverly Cove, not vague ranges. A basic single driveway gate in aluminum runs $3,000 to $5,500 installed. A double swing gate in steel or ornamental aluminum runs $6,500 to $14,000 depending on size and operator. A pedestrian gate is $950 to $2,400. A sliding gate runs $4,800 to $11,000. Underground operators add $3,000 to $5,500 because of the excavation, vault, and drainage work. Every one of these numbers gets quoted in writing before work starts, and it doesn’t change at the door. We also offer a free second opinion on any written estimate from another company, and veterans and seniors get a permanent 10% discount. Call (877) 610-2993 for an exact quote on your Beverly Cove gate.
We Also Serve Cities Near Beverly Cove
We install gates throughout the North Shore. If you’re in Beverly, Salem, Peabody, or Danvers, the same crew that works Beverly Cove harbor-side properties will come to you. Call ahead and we’ll give you an honest window, not a four-hour one.
Serving Beverly Cove, MA - Our Local Coverage Area
We’re based in the Beverly Cove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Cove
Beverly Cove sits directly on Beverly Harbor, and the salt spray from the water is relentlessly corrosive to ferrous metal. Hinges that would last fifteen years a mile inland in downtown Beverly will pit, bind, and crack within three to five years near the water. The fix is marine-grade stainless hardware and sealed bearings from day one. Call (877) 610-2993 and we’ll tell you what you’ve got and what it needs.
Usually yes, if the gate itself is structurally sound. We’ll inspect the frame for rust-through, cracked welds, and sag before we mount anything new. If the gate is worth saving, we’ll weld or reinforce it on site and build the new operator around it rather than pushing a full replacement. If it’s beyond saving, we’ll say that plainly and show you why.
Yes, and it’s the reason we recommend operators with sealed hydraulic or heavy-duty electromechanical internals for bury-install work near the harbor. Water and salt finds its way into a poorly sealed vault, and a flooded underground operator is a $4,000 paperweight. We set vaults with drainage stone and seal every penetration, and we spec operators rated for the exposure. For a Beverly Cove property, we’ll quote an underground operator between $3,000 and $5,500 installed.
You fix the post, not the panel. A gate sags because the hinge post has moved or rotted at the base, not because the leaf bent in the middle. We pull the gate, set a new post in concrete with proper depth for the soil, and re-hang. If you just shim the hinge or add a wheel, you’ll be back here in a year. Call (877) 610-2993 for a look at what’s actually failing.
Yes, automatic vehicular gates in Massachusetts must meet UL 325 safety standards, which means proper safety devices like photocells, contact edges, and the right force settings. Beverly Cove doesn’t have its own separate code beyond what Essex County and the state enforce, but a gate installed without UL 325 compliance is a lawsuit waiting to happen. Every operator we install meets the current standard, and we test it in front of you before we leave.
We recently fabricated and installed a custom double swing gate for a 1920s estate on Lothrop Street, replacing a pitted steel gate whose hinge posts had cracked through from years of salt-laden freeze-thaw cycles. Our crew set new marine-grade stainless hinge posts in deep footings, fit a FAAC underground operator, and wired a keypad entry with a safety photocell to meet UL 325. That gate swings silently despite the harbor air, and it’ll still swing true when the next owner’s grandkids are learning to drive.
If you need a gate installed in Beverly Cove, call Hal at (877) 610-2993. He’ll give you a straight answer, a fair number, and a gate that stays put. The name’s on the shop, and the shop’s down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.