Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Fort Myers, CA | Gatewood Fence & Gate
Fort Myers Gate Repair for Ghost Controls comes down to two things: knowing the equipment and knowing what this coastal climate does to it. Gatewood Fence & Gate is an independent service provider, not a factory-authorized shop, which means we answer to you and the HOA board, not a manufacturer’s parts quota. We’ve been rebuilding Ghost Controls operators across Fort Myers since before Hurricane Ian, and we stock the boards, gears, and sensors that local supply houses don’t carry. Call (877) 610-2993 and Hal or one of his crew will actually pick up.
Why Fort Myers Residents Choose Us for Ghost Controls Service
Most gate companies in Fort Myers know how to swap a swing arm. Ghost Controls asks more of you. The AXS2 solar controller doesn’t behave like a LiftMaster board, and neither does the DSL2 slide motor. We know the difference because we’re the ones pulling failed units out of HOA entry pillars every week, from Gateway to the Caloosahatchee waterfront.
Hal Gatewood has been fixing gates and fences around Florida since 2001. His name is on the shop, the address is published, and the license number is there for anyone to look up. That matters when you’ve already been burned by a national outfit quoting one number on the phone and charging another at the driveway. We also carry the OEM-compatible parts that keep Ghost Controls systems running: REX331 charge regulators, AXS2 control boards, AXDP2 gear sets. And if we have to weld a hinge post back square, we do it on site, in your driveway, not in some shop across town.
Common Ghost Controls Gate Repair Problems We Solve in Fort Myers
These are the calls we run most often in Fort Myers, with the local conditions that trigger them:
- LCD readout failure and ghost cycling on AXS2 boards. Late-summer storms push salt spray into control enclosures, and once moisture condenses on the board, the LCD fades and the gate starts opening on its own. We open the box, clean the corrosion, and replace the board if the traces are gone.
- Cracked nylon drive gears in AXDP2 dual swing systems. Wind gusts off the Gulf catch one leaf mid-travel and snap the nylon teeth. In Fort Myers’s afternoon squall season, we see this weekly. We keep the gear sets in the truck.
- Battery tray corrosion and terminal melt on REX331 solar panels. If your panels sit under dense oak canopy in Gateway, they don’t charge fully. Voltage sags below 11V and the gate reverses randomly, or the terminals fry. We test the whole string, not just the battery.
- Frayed actuator wiring in buried conduit. Sandy soil plus post-Ian floodwater means insulation turns brittle. We trace the run, pull new conductors, and seal the conduit so it survives the next storm season.
- Gate misalignment and hinge pull-out on 1980s and 1990s masonry pillar gates. Older Fort Myers subdivisions built on shifting soil develop post lean. Fixing the panel without addressing the post means you’ll fix it twice. We weld, sleeve, or re-anchor the post first.
Ghost Controls Service in Fort Myers: What Local Conditions Mean for Your Equipment
If you want to understand why Ghost Controls equipment fails the way it does in Fort Myers, drive through Gateway before 8 a.m. The sub-associations along Gateway Boulevard in 33913 were largely built in the same 2005 construction wave, with nearly identical Ghost Controls ASTP4 keypad models on brick entry pillars. What our crew sees on these calls is a failure pattern you will not find in Naples or Ghost Controls repair in Cape Coral: corrosion on pin 2 of the keypad ribbon cable. It shows up because the original Fort Myers spec used a non-weatherized connector on that one pin, and twenty years of Gulf humidity has done the rest. When we stock one ribbon cable and one keypad board on the truck, we can clear four or five communities in a single morning. That is not generic gate repair. That is knowing your ZIP code.
Ghost Controls Models & Products We Service in Fort Myers
For Gate Installation - Fort Myers and repair, we service the full Ghost Controls residential line across Fort Myers, including the AXS1 and AXS2 solar swing gate systems, the AXDP and AXDP2 dual-swing heavy-duty kits, the DSL1 and DSL2 slide gate operators, and the REX331 solar/battery utility gate panels. For parts, we default to genuine Ghost Controls OEM boards, gears, and sensors whenever they can be sourced within a week. For retired AXS1 solar controllers, we install vetted aftermarket MPPT regulators with identical connector fit, no harness cutting. And if a motor has a cracked gearbox housing on a fifteen-year-old gate, we say so plainly: replace the operator now, before hurricane season, rather than pay for a rebuild that fails again in August.
Ghost Controls Service Pricing in Fort Myers
What a Ghost Controls repair costs in Fort Myers depends on what failed, not on what the gate company thinks you’ll pay. A simple keypad reprogram or limit switch adjustment runs on the lower end. A full AXS2 board replacement or AXDP2 gear set runs higher. We quote the price up front, in writing, before any work starts, and that price does not change when we’re standing in your driveway. The free estimate includes the diagnosis, the parts list, and the labor hours, so the HOA board can see exactly where the money goes. Call (877) 610-2993 and we’ll give you a number you can take to the next board meeting.
Serving Fort Myers, FL - Our Local Coverage Area
We’re based in the Fort Myers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Fort Myers
Afternoon rain in Fort Myers brings two things: moisture and wind. The moisture condenses on the AXS2 control board, and the wind gusts catch one leaf on a dual-swing AXDP2 system and stall the operator. The gate’s MS2 limit switch then loses its position and stops mid-travel. We dry the enclosure, repair or replace the board, and recalibrate the limits. If it recurs, the board needs replacement, not another reset. Call (877) 610-2993 and Hal will walk you through what you’re seeing.
Yes, if the other operator still holds calibration and shows no gear wear. On AXDP2 systems in Fort Myers, the left leaf usually fails first because afternoon squalls catch it mid-swing. We replace the one operator, re-sync the MS2 limit switches, and save the HOA half the cost of a full replacement. If both operators show the same sand-grit wear, we tell you straight and price both.
The short answer is panel placement, not panel count. REX331 panels under dense oak canopy in Gateway charge fine in winter, then sag below 11V during June-to-September cloud cover. We relocate panels to full sun where possible, or add a second panel on a charge controller sized for the combined array. We also check the battery tray for corrosion, because terminal melt on REX331 units follows voltage sag like clockwork.
We do. A single Fort Myers HOA often runs three separate Ghost Controls entry points, each with its own keypad but the same board logic. We program all three in one visit, test each from the resident and guest sides, and hand the board a printed code map. If one keypad has ribbon cable corrosion, we replace that cable on site rather than waiting for it to fail during a board meeting week. Call (877) 610-2993 and we’ll schedule the whole job at once.
Not too late. It is overdue. Hurricane Ian’s storm surge and the power flicker that followed cooked thousands of unprotected Ghost Controls boards across Fort Myers. A surge protector costs far less than an AXS2 board replacement, and we install them on the line side of the operator, not the load side, so the board and the motor both get protection. Call (877) 610-2993 and we’ll add it the same day we’re out for anything else.
Service Areas Near Fort Myers
We run Ghost Controls service across Lee County and beyond. Our Fort Myers service area covers Gateway (33913), Colonial Boulevard neighborhoods (33912), the Caloosahatchee waterfront, and downtown’s older masonry pillar gates (33901). We also take calls from Cape Coral, Bonita Springs, Estero, and Lehigh Acres. Further south, we provide Ghost Controls service in Fort Lauderdale and Ghost Controls service in Boca Raton for the same coastal corrosion issues. For full Ghost Controls sales and parts, see our Ghost Controls sales & service page.
Book Your Ghost Controls Service in Fort Myers Today
Your gate is not going to fix itself, and Fort Myers summers are not patient. Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on Ghost Controls repair. We answer live, twenty-four hours a day, and we’ll set a window we actually keep. Call me directly. If I don’t pick up, I’ll call you back - not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Myers since 2001.