Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Los Angeles Homeowners
A gate that drags across the driveway or refuses to open isn’t something you put off, because that gate is the first thing between your home and the street. Best Gate Repair in Los Angeles, CA is what we do every day at Gatewood Fence & Gate. Hal Gatewood has been at it since 2001, owner-operated the whole time, and when you call (877) 610-2993 about a gate in Los Angeles, you’ll get a live person who can usually have someone at your property the same day. We fix the gate in your driveway instead of hauling it off and selling you a new one. If it can be welded, realigned, or rebuilt, that’s what we do first, and every repair carries our 90-Day Done Right Promise in writing.
Most of the calls we get in Los Angeles start the same way. Somebody’s automatic gate stopped mid-cycle, or a swing gate started sagging so badly it scrapes the concrete. That’s when people find out how hard it is to get a gate company to answer the phone. Hal publishes the shop address and answers calls around the clock. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Key Takeaways:
- Same-day gate repair available across Los Angeles for most common failures.
- Repair-first approach: gate stays in your driveway, welding happens on site.
- Live person answers the phone 24/7 at (877) 610-2993.
- Every job carries a written 90-Day Done Right Promise.
- $40 off any repair over $200, no trip charge inside the county.
What Our Gate Repair Service Includes
Electric Gate Repair
An electric gate that won’t open usually comes down to the operator, the power supply, or a safety sensor that’s gotten itself confused. In Los Angeles, where a lot of driveways are gated at the sidewalk, a dead operator means your car is stuck on one side or the other. We test the operator, the wiring, the photo eyes, and the loop detector, then fix what’s actually failed rather than replacing the whole setup. If you have a Viking or DoorKing operator that’s been reliable for years, we’ll keep it running instead of pushing you into a new one.
Automatic Gate Repair
Automatic gates fail in predictable ways, and we’ve seen most of them over more than two decades. A gate that opens but won’t close is usually a sensor issue. A gate that won’t open at all might be the control board, the receiver, or a limit switch that’s drifted out of adjustment. We carry parts for Ghost Controls, Elite, DoorKing, and other major brands on the truck, so the repair usually happens in one trip. You’ll see the person who shows up in a uniform, background-checked, and trained to diagnose before touching anything.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Los Angeles properties with mature landscaping often have posts that have shifted in soil that expands and contracts with the seasons. We weld cracked hinges, reinforce bent posts, and reset plumb where needed. Fix the panel without the post and you’ll fix it twice, so we don’t do that, and we’ll explain why before we touch anything.
Gate Realignment
When a swing gate drags or a slide gate binds, something underneath has moved. We check the posts, the hinge barrels, the level of the gate, and the track or opener alignment before making any adjustments. In hilly Los Angeles neighborhoods, we see a lot of gates that were never installed level in the first place. We correct the alignment, adjust the travel limits, and leave the gate opening and closing the way it should.
Lock Repair
A gate lock is only as good as its alignment, and a strike plate that’s even a quarter inch off will wear the latch out fast. We repair and replace mechanical locks, keypads, and electronic strikes, and we key everything to match the rest of the property when that’s what you need. For Los Angeles homeowners who’ve had a lock forced or simply worn out, we make the gate secure again before we leave.
Weld & Rust Repair
Rust is a slow leak, and in Los Angeles’s coastal air it works faster than people expect. We grind out the rust, weld in solid steel, and treat the repair so it doesn’t come back next season. We weld on site, so your gate never leaves the property. That means no hauling, no patch job from a shop twenty miles away, no middleman between Hal and the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We service nine major gate brands, but the ones we see most often across Los Angeles driveways are Viking, Ghost Controls, DoorKing, and Elite. We’ve serviced hundreds of DoorKing and Viking operators over the years, and we keep their OEM parts stocked on the service truck so the repair doesn’t get delayed waiting on a shipment. Hal has worked on these systems since before most of the national chains even offered gate repair as a service.
Ghost Controls and Elite units show up on a lot of newer residential installs around Los Angeles, and we know those control boards well enough to diagnose a problem over the phone before we even arrive. That saves you a trip charge and gets the repair moving faster. Whether you have one of those brands or something else entirely, we can help. A gate operator is a gate operator, and we’ve been fixing them since 2001.
Signs You Need Gate Repair Right Now
- The gate pauses and reverses halfway. That’s almost always a safety sensor or a force setting that’s gone wrong. If the gate thinks something is in the way every time it closes, the settings need attention before the operator burns itself out trying to fight the gate.
- The gate scrapes the ground or drags. A dragging gate puts stress on the opener, the hinges, and the post. That strain turns a fifty-dollar hinge repair into a five-hundred-dollar operator replacement if you wait too long.
- The opener runs but the gate doesn’t move. Usually that means a chain, a gear, or a drive coupling has let go. Running the motor when the gate isn’t responding puts unnecessary wear on the whole assembly.
- The gate shakes or wobbles when moving. A wobbly gate is telling you a roller, a hinge, or a post has failed. The movement gets worse over time, and a gate that comes off its track is a serious hazard.
- You have to get out of the car to open it. If the remote, keypad, or app has stopped working, the gate is half-broken. We see this a lot in Los Angeles with older receivers and keypads, and it’s usually a simple fix if you catch it early.
Our Gate Repair Process - Step by Step
- 1
Call and talk to a person. Not a voicemail, not a call center, not a chatbot. You call (877) 610-2993, a live person answers, and you tell us what the gate is doing. Hal or one of his crew asks the right questions so we know what the likely problem is before we ever leave the shop.
- 2
On-site diagnosis. We show up when we said we would, look at the whole gate, and test the operator, the sensors, the posts, and the welds. You see the problem too, because we explain what we found in plain English. No mystery, no pressure.
- 3
Upfront written quote. The price is quoted and agreed before any work starts. Not an estimate that might change at the door. Hal’s price is the price, and that’s how it has been since 2001. The quote includes the 90-Day Done Right Promise.
- 4
Repair done on site. We fix the gate in your driveway. Welding, realignment, operator replacement, it all happens at your house so you can watch the work. The gate doesn’t leave the property, which means no one is trying to upsell you on a replacement while your gate sits in someone else’s shop.
- 5
Test and walkthrough. Before we leave, the gate cycles several times, the safety features get tested, and you watch it work. We walk you through what we did and what to watch for. Then the 90-Day Done Right Promise is handed to you in writing. If it’s not done right, one call brings Hal back. No runaround.
How Much Does Gate Repair Cost in Los Angeles?
Gate repair in Los Angeles typically runs anywhere from $180 for a basic hinge or sensor fix up to $850 or more for a full operator replacement or significant weld work. The most common calls we get, realignments and lock replacements, usually land in the $225 to $425 range. A new control board for a DoorKing or Viking operator runs higher, and that’s when we’ll show you the part price and the labor separately so you know exactly what you’re paying for.
What affects the price is mostly the condition of the gate and the parts involved. A gate that’s been ignored for three years costs more to fix than one caught early, because the damage compounds. A heavy steel gate takes longer to realign than a lighter aluminum one. The best way to avoid overpaying is to get a written quote before work starts, which is exactly how we operate. Hal’s price is the price, and if you have a written estimate from another company, we’ll give you a free second opinion on it. You can also take $40 off any repair over $200, and if you’re a senior or veteran, there’s a permanent 10% discount.
Gate Repair Near Los Angeles - Our Service Area
We serve Los Angeles and the surrounding communities, including Long Beach, Riverside, Woodland Hills, Santa Clarita, Santa Ana, Hayward, and Palmdale. For most residential gate repairs, we can be on site the same day you call. If you’re a little farther out, we’ll give you a straight answer about timing when you call. This page covers Gate Repair in Los Angeles, and we also keep service pages for Gate Repair in San Francisco and Gate Repair in Sacramento. Wherever you are, call (877) 610-2993 and a live person will answer.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Los Angeles
Gate repair is the process of diagnosing and fixing a gate that won’t open, close, swing, slide, lock, or stay level. It includes work on hinges, posts, operators, sensors, locks, and welds. We handle all of it, from a hinge that’s worn out to a control board that’s fried, right at your Los Angeles property.
Most common repairs, like a realignment or a sensor replacement, are done in under two hours on site. A full operator replacement or extensive weld repair can take four to six hours. When you call (877) 610-2993, we’ll give you a realistic time frame based on what the gate is doing, and we stick to it.
Most residential gate repairs in Los Angeles fall between $180 and $850, with typical jobs landing around $225 to $425. The final price depends on the parts, the size of the gate, and how long the problem has been left to worsen. The price is quoted and agreed before any work starts, so there are no surprises at the door. Call (877) 610-2993 for an exact quote - estimates are free.
Yes. We service DoorKing, Viking, Ghost Controls, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule operators. We stock OEM parts for DoorKing and Viking on the service truck, which means the repair usually gets done in one trip. If you have a different brand, we still fix it.
In most cases, yes. We answer the phone 24/7 at (877) 610-2993, and for Los Angeles homeowners with a gate that won’t close or won’t open, we make Emergency Gate Repair in Los Angeles, CA a priority. A gate stuck open is a security problem, and we treat it like one.
Every repair carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back to make it right. No fine print, no runaround, no hedge language. That’s the whole promise.
Clear the driveway so the worktruck can get close, and if you know how the gate normally behaves, write down what it’s doing differently. Move any potted plants or decorations away from the gate path. Then just call (877) 610-2993 and tell us what’s wrong. We’ll handle the rest.
Schedule Your Gate Repair Service in Los Angeles Today
If your gate is sagging, dragging, or refusing to open, don’t wait until it fails completely. Call (877) 610-2993 now and talk to Hal or one of his crew. We answer live 24/7, the estimate is free, no trip charge inside the county, and the price is agreed before any work starts. We’ll fix your gate right, in your driveway, and put the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Angeles since 2001.