Gate Repair in Lantana - Same-Day Repair, Priced Before We Start

Gate Repair in Lantana, FL

When a gate stops opening in Lantana, it’s usually one of three things: a motor that’s given up after years of salt air, a hinge that’s rusted through near the lagoon, or a post that’s leaning because the original install never met Palm Beach County’s wind-load requirements. We’re Gatewood Fence & Gate, and we fix all three without replacing what doesn’t need replacing. Most gate repairs in Lantana run between $180 and $600, and we quote the price before any work begins. Call (877) 610-2993 and a live person answers.

Call (877) 610-2993

Why Lantana Homes Are Different

Lantana sits directly on the Lake Worth Lagoon, and that location drives almost every gate problem we see here. The salt air rolling off the Intracoastal is constant. It settles on steel frames, hinge pins, motor housings, and wiring terminals. In a house two miles west, a zinc-plated hinge might last a decade. In Lantana, you’ll see rust blooms in two or three years. Gate motors seize, limit switches corrode, and circuit boards fail from humidity shorting. A gate that works flawlessly in a showroom will fight you within a season if it isn’t spec’d for marine conditions.

The housing stock compounds the problem. Lantana is full of mid-century ranch homes and small bungalows built between the 1950s and the 1970s. Many of those original swing and slide gate systems are still in place, held together by hardware that predates current wind-load codes. The manufactured home communities in town tend toward lightweight aluminum and chain-link systems, which rust differently but just as reliably. And because the whole 33462 ZIP sits within a half-mile of saltwater, corrosion-rated hardware isn’t an upgrade here. It’s the only thing that lasts.

Gate Repair in Lantana

Gate repair in Lantana usually starts around $140 for a simple hinge replacement and runs $240 to $480 for motor or circuit board work on automatic systems. Most jobs are diagnosed and fixed on the first visit, often the same day you call. The salt air changes what fails and how fast, so we look at the post before the panel and the board before the motor. If your gate won’t open, sags at the latch, or grinds when the motor kicks in, call us at (877) 610-2993 and a live person answers. No voicemail, no ticket number. For the full scope of what we handle, see our Gate Repair page.

Electric Gate Repair

Electric gates in Lantana fail most often at the operator, not the gate itself. The saline humidity that rolls off Lake Worth Lagoon wicks into the operator housing through conduit gaps and corrodes the circuit board, relays, and limit switches years before the manufacturer’s rated lifespan. We diagnose the exact board or component that died, replace it with corrosion-rated parts where possible, and reseal the housing so the next board doesn’t follow the same path. Replacing an operator circuit board or limit switch on an automatic system runs $240 to $420.

Hinge & Post Repair

This is the most Lantana-specific repair we do. Hinge posts rust at the base from salt water pooling in the footing, even when the panel looks fine. The gate sags, scrapes the concrete, and puts destructive force on the operator. We don’t just shim the hinge and call it done. We cut out the corroded post footing, pour a new one to meet Palm Beach County’s post-Andrew lateral force requirements, and set the post with stainless anchors that won’t rot out in five years. A standard hinge replacement with stainless hardware runs $140 to $260, while cutting out and re-pouring a corroded hinge post footing runs $350 to $600 depending on the post and access.

Gate Realignment

Slide gates in Lantana bind on the rack gear after heavy rain because the soil around the track shifts and the rollers settle unevenly. Lagoon-adjacent lots have higher water tables, which makes this worse than inland. We reset the rollers, re-level the track, and square the gate so it rolls without dragging. Weld and rust repair on a steel frame runs $180 to $450 depending on how much metal is left, and we’ll show you exactly what we’re fixing before we strike an arc.

How does Lantana’s proximity to Lake Worth Lagoon change the lifespan of a galvanized steel gate?

Expect roughly five to eight years less life from standard galvanized steel in Lantana than in inland towns, because the lagoon’s salt-laden air accelerates rust at the bolt holes, hinge points, and post bases. On lagoon-adjacent lots, marine-grade stainless hardware and painted or powder-coated steel are worth the difference. Call (877) 610-2993 and we’ll assess what you have.

Is my pre-2000 swing gate in Lantana compliant with Palm Beach County’s wind-load rules?

Probably not, unless it’s been retrofitted. Palm Beach County’s post-Andrew wind-load ordinances require automated gate systems and their posts to meet specific lateral force ratings, and most installations from the 1950s through the 1990s in Lantana’s ranch and bungalow housing stock were built to older, weaker standards. We address footing and post size when we repair older gates.

Gate Installation in Lantana

Gate installation in Lantana means working with salt air, strict wind-load codes, and housing stock that’s older than most technicians realize. If you’re replacing a sagging 1960s swing gate or adding a slide gate off Lantana Road, we’ll give you a straight answer on what will actually hold up here. For the full scope of our installation work, see our Gate Installation page.

Driveway Gate Installation

Most driveway gates in Lantana are either mid-century swing gates on original posts or newer slide gates that someone installed without accounting for the soil and wind exposure near the Intracoastal. We install both, but we also tell you the truth about what your existing posts can hold. A gate sags in the hinge post, not in the middle, and that’s where we start. A basic single swing gate installation runs $2,200 to $4,800, depending on gate width and whether we’re reusing existing posts or setting new ones.

Sliding Gate Installation

Sliding gates are common on the wider lots along Lantana Road and in the newer residential pockets of town. The track and roller system sits close to the ground, where salt spray and standing water after summer thunderstorms do their worst. We install slide gates with sealed bearing rollers and corrosion-resistant track, and we set the posts deep enough to meet Palm Beach County’s wind-load requirements. A sliding gate installation runs $3,800 to $7,500, with the track, roller system, and operator included.

Pedestrian Gate Installation

Pedestrian gates along the lagoon side of Lantana take a beating from the same salt-laden air as the driveway gates, but they’re lighter and often neglected until the hinges seize or the latch corrodes shut. We install new pedestrian gates in aluminum or powder-coated steel, with hinges and fasteners that hold up in a marine environment. Adding automation to an existing gate typically runs $1,400 to $3,200, depending on the operator brand and whether we need to pull new conduit.

Can you retrofit my old 1970s swing gate to meet current Palm Beach County wind-load code?

In many cases, yes. The gate panel itself often has life left, but the posts and footings were never sized for post-Andrew lateral force requirements. We can set new posts to code depth, re-weld the hinge points, and add a marine-grade operator. If the steel is rusted through at the hinges, replacement is the cheaper answer. We’ll show you the numbers either way.

Do I need a safety photocell on a new gate installation in Lantana?

Yes. Current UL 325 entrapment protection standards require safety photocells or equivalent contact sensors on all automated gate installations, including retrofits on older gates. Every automated gate we install in Lantana includes properly positioned photocells and force settings tested to current code. Call (877) 610-2993 for a written quote.

Gate Motor & Opener in Lantana

A gate motor or opener replacement in Lantana typically runs $650 to $1,850 installed, while repairs on most operators land between $180 and $420. Those numbers assume the right diagnosis, not a parts-swap guess. If you live anywhere in the 33462 ZIP, you’re dealing with salt air from the Lake Worth Lagoon every single day, and that changes how long gate motors last here. We answer the phone at (877) 610-2993, and the person who answers can actually tell you what’s wrong. For the full scope of motor work, see our Gate Motor & Opener page.

Motor Repair

Most gate motor calls in Lantana start with the same symptom: the opener hums, clicks, or does nothing at all. Salt corrosion from the lagoon eats control boards and wiring terminals years before a motor’s mechanical parts wear out. We test the board, the capacitor, the limit switches, and the gear train before quoting anything. A gate motor repair in Lantana typically runs $180 to $420, covering board-level repair, limit switch replacement, capacitor swaps, and most same-visit fixes.

Motor Installation

When a motor in Lantana truly is beyond saving, we install a new operator matched to your gate’s weight, cycle count, and exposure. For lagoon-front properties we recommend corrosion-rated models with sealed boards. For mid-century ranch homes off Federal Highway, that often means a modern slide or swing operator that finally meets Palm Beach County’s wind-load requirements. A full operator replacement with new motor, controls, and safety edges runs $650 to $1,850 installed, with corrosion-rated and marine-grade components at the upper end for lagoon-front properties.

Linear Motor Service

Linear arm operators are common on Lantana’s older swing gates, especially on smaller bungalows and manufactured homes. The arm threads and internal gearing wear faster near the lagoon because the salt air accelerates surface pitting. We stock Linear replacement arms, boards, and coupling kits, so we often complete repairs the same visit. Linear arm replacement or slide motor drive repair usually falls in the $350 to $700 range depending on the brand and the damage.

Why does my gate opener fail so much faster in Lantana than inland?

Lantana’s entire 33462 ZIP sits within a half-mile of Lake Worth Lagoon, and the salt-laden air here corrodes gate operators at roughly twice the rate of inland communities. Control boards pit, wiring terminals oxidize, and the result is an opener that fails in five to seven years instead of ten to twelve. The fix is a corrosion-rated or sealed operator, not the same model you’d install inland.

My gate sags and the motor strains. Do I need a new opener or just a hinge repair?

You need the hinge post inspected first. In Lantana’s older ranch homes, the original hinge post is often rusted inside the concrete, and the gate sags because the post has shifted, not because the opener is weak. A sagging gate overloads the motor and strips the drive gear. We repair or replace the post, then assess the operator. Often the motor is fine once the gate sits level.

Gate Access Control in Lantana

Gate access control in Lantana means keypads, card readers, phone entry, and video intercoms that have to survive salt air, intense sun, and hurricane season. Most equipment rated for ordinary Florida use fails early here because Lantana sits directly on the Lake Worth Lagoon, where concentrated salt spray corrodes contacts and control boards years ahead of schedule. We stock marine-rated components and corrosion-resistant housings specifically for the 33462 ZIP. For the full scope of access work, see our Gate Access Control page.

Keypad Entry

Keypads in Lantana take a beating. Salt-laden humidity from the Intracoastal corrodes terminals and button contacts within two to three years, even on units rated for outdoor use. We install sealed, UV-stabilized keypads with stainless steel keys, and we hardwire them properly so you’re not replacing the same part every other summer. A keypad replacement in Lantana typically runs $180 to $340, including the sealed keypad and labor.

Phone Entry

Phone entry lets you open the gate from your cell phone, and it’s one of the most requested upgrades we do in Lantana. Older homes here were built long before smart access existed. We retrofit phone entry onto legacy operators where the board allows it, and we tell you honestly when a board swap or operator replacement is the only real path. Phone entry systems start around $400 and go to $900 with full smart access integration.

Card Reader

Card readers at Lantana properties, especially those near the water, suffer from contact corrosion that makes cards fail to scan. We install sealed readers with weather-tight gaskets and position them away from direct salt spray where possible. For HOA communities and multi-unit properties in the 33462 ZIP, we service and replace card readers for most common access brands and integrate them with existing gate operators. Card reader installations run $250 to $500 depending on whether we’re tying into an existing access board or adding a standalone controller.

Can I add phone entry to my 1960s swing gate operator?

It depends on the control board. Many original operators on Lantana’s mid-century homes have boards with no unused inputs and no wireless capability, which means phone entry and smart access cannot be added without replacing the board or the whole operator. We’ll inspect it and tell you straight whether a board swap saves the system or a corrosion-rated replacement is the cheaper long-term answer.

Is a failing loop detector a safety issue?

Yes. A failing loop detector typically causes the gate to stay open after a vehicle passes, or refuse to open for a car sitting directly on the loop. In Lantana, saltwater intrusion into operator housings near the lagoon shorts these circuits. A gate stuck open on a lagoon-front lot is an invitation, and a gate that won’t open for emergency vehicles is worse. Call (877) 610-2993 for a diagnosis.

Gate Parts & Welding in Lantana

Most gate failures in Lantana are not replacement problems. They’re parts problems: a rusted hinge, a cracked post, a seized roller, a gate frame that’s pulled away from a weld. The right fix is usually a repair done in your driveway, not a new gate ordered off a computer screen. That’s exactly what our Gate Parts & Welding work is about. If you’re in the 33462 ZIP, we can typically have someone at your property quickly for a free assessment.

Hinge Replacement

Hinges on Lantana gates take a beating from salt-laden air that rolls off the Intracoastal every afternoon. We regularly see OEM hinges that look fine from five feet away but have rusted through at the pin or wallowed out the post mount. We replace hinges with marine-grade stainless or galvanized hardware, weld or bolt them in properly, and set the gate’s swing so the hinge isn’t fighting gravity. A hinge replacement in Lantana typically runs $85 to $210 per hinge, installed.

Post Replacement

The hinge post is where almost every old Lantana swing gate fails. On mid-century ranch homes and bungalows, original posts were often set shallow with plain steel and no drainage. Decades of lagoon humidity later, the post rusts through below grade, and the gate sags or the post kicks sideways. We cut out the old post, dig a deeper footing to meet Palm Beach County wind-load requirements, set a new galvanized post in concrete with proper drainage, and re-hang the gate. Full post replacement runs $350 to $750.

Custom Welding

This is where Hal’s repair-first approach really shows. Cracked steel frame? Broken weld where the gate meets the post? A decorative element pulled loose after a hurricane gust? We bring the welder to your driveway in Lantana and fix it on site. The gate stays where it hangs. No removing it, no leaving your property open for days while it sits in a shop. Custom welding repairs in Lantana generally run $120 to $300 for typical cracks and broken welds, and we’ll show you the break before we weld it.

Can you weld a cracked steel gate frame in Lantana without removing the gate?

Yes, in almost every case. We bring the welder to your property and repair the crack while the gate stays hung. Welding on site means we can set the gap, check the swing, and confirm the repair under the gate’s real weight, not on a bench in a shop. That’s how we do custom welding in Lantana.

Should I replace only the hinge on my Lantana swing gate, or the post too?

If the hinge is worn but the post is still solid, you replace the hinge and keep the post. If the post shows any rust weeping, flaking, or movement at ground level, you replace both at once. Salt air here gets into the post from the inside out, so a failed hinge is often a sign the post isn’t far behind. We’ll tell you straight which one you need.

Brands We Service in Lantana

We service and stock parts for Linear, Viking, Ghost Controls, and DoorKing, among others, right here in Lantana. Common arms, boards, and remotes ride on the truck, so most repairs don’t wait on shipping. See our brands for the full list of what we work on.

Pricing for Gate Repair in Lantana, FL

Neighborhoods We Serve in Lantana

We cover all of the 33462 ZIP, and response time across Lantana is typically same-day when you call before noon. Here are a few of the neighborhoods we’re in most weeks:

• Lantana Heights
• Maddock
• Hypoluxo Island
• Lantana Pines

Service Area - Cities Near Lantana

We work throughout Lantana, FL and the surrounding communities, including Lake Worth, FL, Lake Worth Corridor, FL, Boynton Beach, FL, Greenacres City, FL, and Palm Springs, FL. Same local crew, same upfront pricing, no trip charge inside Palm Beach County.

FAQs About Gate Repair in Lantana