Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Fort Worth, CA | Gatewood Fence & Gate
We provide independent Ghost Controls gate opener service across Fort Worth, and the one thing that separates our Fort Worth Gate Repair work here is simple: we fix the gate geometry before we touch the board. The Blackland Prairie clay under this city heaves posts out of plumb every spring, which means half the Ghost Controls problems we see in Fort Worth aren’t electronic at all. They’re mechanical failures wearing out perfectly good motors. If your opener’s acting up, call (877) 610-2993 and Hal or one of his crew will sort out what’s actually failing.
Why Fort Worth Residents Choose Us for Ghost Controls Service
Hal Gatewood has been working gates since 2001, and Ghost Controls openers have been on his truck since the early days. We know the TSS1, the TDS2XP, the AXDP, the SL1, and the older screw-drive units that aren’t made anymore. We’re not factory-authorized, and we won’t pretend to be. What we are is independent, which means we can tell you honestly when a repair makes sense and when you’d be throwing money at a gate that needs welding, not a new control board. That honesty is why people around Fort Worth keep our number saved.
The name on the shop is Hal Gatewood’s. He grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College before spending years figuring out what the classroom never covered, like why a gate that swings fine in February starts dragging in August. These days, he’s the guy neighbors call when a previous installer left stripped hinges or a motor wired so badly it trips the breaker every other week. Sorting out that kind of mess is what he’s best at.
Every job comes with our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back, no runaround. And the price you get quoted before the work starts is the price you pay when it’s done.
Common Ghost Controls Gate Repair Problems We Solve in Fort Worth
- Capacitor or board failure after spring lightning storms. Fort Worth’s April and May thunderstorms send dirty power through the grid, and newer Ghost Controls controllers like the TSS1XP are touchy about voltage spikes. We replace failed caps and boards, and we can add surge protection so the next storm doesn’t cook the new one.
- Stripped screw-drive threads on TSS1 linear arms. This is a Crestline and Monticello problem more than most. Those 1960s ornamental iron gates catch North Texas wind like a sail, and when the wind slams the gate against its mechanical stops, the linear arm threads take the abuse. We replace the arm and then correct the stop geometry so it doesn’t happen again in three months.
- Battery-backup failures on TDS2XP units. When Fort Worth’s clay shifts a post even a couple degrees, the gate no longer travels true. The motor works against constant static load, and the backup battery drains in under a year. We realign the post, re-run the travel limits, and only then put in a fresh battery that will actually hold.
- Limit-switch drift and false obstruction triggers. Tarrant County’s hard water leaves calcium deposits on photo-eye lenses and mineral scale on pivot points. The opener sees its own rust flakes as an obstruction and refuses to close. We clean the lenses, free the mechanical binds, and re-teach the limits.
- Seized hinges and pivot bearings dragging a gate the motor was never sized for. A Ghost Controls opener retofitted onto a 50-year-old iron gate that hasn’t been greased since the Carter administration will burn through motors. We pull the gate, free the bearing, replace what’s worn, and only then address the opener. The mechanical fix comes first, always.
Ghost Controls Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth’s West Side tells the story better than any spec sheet. Drive through 76107 and you’ll see a concentration of 1960s and 1970s ornamental iron driveway gates with Ghost Controls retrofits bolted to 4-inch schedule-40 posts set only 24 inches deep. That’s shallow for the Blackland Prairie’s 10-inch seasonal soil movement. When spring rains swell the clay, those posts lean. When August bakes it dry, they lean the other way. The gate binds, the motor strains, and the limits that were set in March are useless by June. Nearly every call we take in that part of Fort Worth is a two-part Gate Installation - Fort Worth job: realign the post, then re-run the Ghost Controls travel limits. Anyone who skips the first step and just replaces the motor will be back out there in six months doing it again. We’d rather do it right the first time, which is why we bring the welder and the post level on every Ghost Controls call. Show me the gate closing on its own and I’ll show you where it’s failing.
Ghost Controls Models & Products We Service in Fort Worth
We service the full current Ghost Controls line: the TSS1 and TSS1XP dual-swing opener kits, the TDS2XP dual-swing with battery backup, the AXDP axle-drive for heavy iron gates, and the SL1 slide gate opener. We also keep working knowledge of discontinued screw-drive generations that still sit on older Fort Worth gates. Our parts position is straightforward: we stock Ghost Controls OEM boards, transformer kits, and linear arms for same-day swap-outs when the fix calls for them. But we won’t sell a new board onto a hinge-sprung gate. The mechanical fix comes first. When OEM lead times stretch past a week, we use proven aftermarket transformers and batteries that match Ghost Controls voltage specs, and every repair carries our one-year workmanship warranty. This is the same approach we use across our Ghost Controls sales & service work everywhere we go.
Ghost Controls Service Pricing in Fort Worth
Repair pricing for Ghost Controls openers in Fort Worth generally lands in these ranges, depending on what’s failed and whether post work is needed:
- Travel-limit reset and photo-eye cleaning: $95 to $180
- Linear arm or screw-drive replacement: $220 to $400
- Control board or capacitor replacement: $180 to $380
- Battery-backup replacement (TDS2XP): $140 to $260
- Post realignment with weld correction: $350 to $800, depending on how far the clay moved it
Every estimate is free, so call us before you agree to anything else. The number Hal quotes on the phone is the number that holds when the job’s done. That’s how we’ve always worked. For an exact quote on your specific opener, call (877) 610-2993. Estimates are free, and we don’t charge a trip fee inside the county. A free second opinion on any written estimate is ours to give, no strings.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Fort Worth
Because the clay under your gate is moving your posts. Fort Worth’s Blackland Prairie soil swells with spring rain and contracts in summer, shifting posts a few degrees every season. The opener’s obstruction sensor reads that bind as an object in the swing path and cuts power mid-cycle. The fix is post realignment first, then a limit re-teach. Call (877) 610-2993 and we’ll set it straight.
Yes, but the gate gets rebuilt first. Most of those Crestline and Monticello gates have decades of rust on the hinge points and weld fatigue at the stress joints. We’d mount a Ghost Controls AXDP on a heavy iron gate like that, but only after we’ve re-bushed the hinges, plumbed the posts, and welded anything that needs it. Mounting a new opener on a stiff gate just burns the motor out. When the gate’s ready, we match the opener to the swing arc honestly.
It’s common, but it isn’t normal. When Fort Worth’s clay shifts a post, the motor works against constant load every cycle. That eats backup batteries fast. The real fix is correcting the gate geometry so the motor isn’t fighting the gate. Then the new battery will actually hold its charge. We stock the correct batteries and we’ll get your gate swinging true first.
Most likely, water’s getting into the receiver or the photo-eye connections are corroding from hard-water mineral deposits. Older Fort Worth installations often have control boxes mounted where irrigation spray and gutter splash hit them. The antenna connection corrodes, the range drops, and the remote only works when you’re standing right next to the box. We’ll reseal the box, replace the corroded connectors, and clean the photo-eye lenses so the signal clears up.
Depends on the whole gate. If the arm is stripped and the gate geometry is sound, swapping the linear arm for $220 to $400 makes sense. If the gate’s already binding from post shift or rust-seized hinges, a new kit would just fail the same way in a year or two. We’ll tell you honestly which position you’re in. Call (877) 610-2993 and Hal will walk you through it without selling you anything you don’t need.
Service Areas Near Fort Worth
We work throughout the Fort Worth metro and into nearby communities. If you’re in Fort Worth service area or the surrounding towns, you’ll see our trucks regularly. We also run calls into Ghost Controls service in Plano, where newer HOA subdivisions run standardized Ghost Controls hardware on their automated gates, and Ghost Controls service in Frisco, where master-planned communities put swing openers on heavier decorative iron than you’d expect. Each town has its own soil and its own gate stock, and we service them accordingly.
Book Your Ghost Controls Service in Fort Worth Today
Call (877) 610-2993 and a live person answers. Not a voicemail, not a call center three states away. We’ll get someone out to your Fort Worth gate, diagnose it honestly, and quote a price that holds. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.