Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Frisco, CA | Gatewood Fence & Gate
We provide independent Frisco Gate Repair for Ghost Controls systems, and the work here has a shape to it we don’t see in nearby cities. The mid-2000s HOA construction surge put thousands of nearly identical Ghost Controls TSS1 and TDS2 swing operators on ornamental iron gates, and the Blackland Prairie clay under Frisco is now heaving those posts out of plumb year after year. That combination means Ghost Controls limit switches drift and ARM circuit boards thermal-cycle harder than they ever would in sandier soil. Call (877) 610-2993 and we’ll tell you what’s actually failing before we ever touch a wrench.
We’re Ghost Controls sales & service specialists who have worked these exact operators since the subdivisions went in. Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. We are not manufacturer-authorized, and we don’t pretend to be. We’re independent, which means we stock OEM Ghost Controls boards and motors but we’ll also tell you when an aftermarket hinge or bracket will outlast the original in Frisco’s clay.
Why Frisco Residents Choose Us for Ghost Controls Service
Most gate companies see a Ghost Controls opener once in a while. We see them every day, usually in the same subdivisions, often on the same street. Frisco’s HOA-governed neighborhoods in the 75034 and 75035 corridors installed these operators as standard features, not custom upgrades, so the hardware is nearly uniform block to block. That means we can stock a matching parts set and fix three adjacent driveways in one trip without guessing.
Hal grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College before spending years in the field sorting out what the classroom never covered. These days he’s the guy neighbors call when a previous installer left stripped hinges or a motor wired so badly the breaker trips every other week. We repair first. We weld on site. We bring the gate back to square in your driveway instead of hauling it off. And every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back, no runaround.
Common Ghost Controls Gate Repair Problems We Solve in Frisco
- ARM circuit boards failing from heat cycling. Frisco summers run past 105°F, and those Ghost Controls ARM boards sit inside unventilated operator housings on black iron gates. Thermal fatigue throws error codes or kills remote response entirely. We’ve replaced enough of them to know the failure signature before we open the housing.
- Limit switches drifting on TSS1 and TDS2 arm motors. When the Blackland Prairie clay swells in spring and shrinks in summer, gate posts tilt. The limit switches don’t know the post moved, so the gate stops short or over-travels and slams the stop. We realign the gate and recalibrate the limits together, because fixing one without the other just delays the next call.
- Stripped gearboxes on single-swing openers. Ghost Controls makes a solid affordable opener, but the gearbox on a TSS1 will strip or seize after years of fighting a hinge that’s binding because the post drifted. The gearbox gets blamed. The post caused it. We fix both.
- Solar panel wiring and battery terminal corrosion. North Texas springs bring humidity swings that eat at Ghost Controls solar connections and trigger low-battery beeps. We clean, reseal, and replace with marine-grade connectors that hold up better here.
- Remote control intermittent failure in summer. When a Ghost Controls remote works at dawn and dies by 3 p.m., it’s usually the board heat-soaking, not the remote battery. We test the receiver under load and replace what’s actually failing.
Ghost Controls Service in Frisco: What Local Conditions Mean for Your Equipment
Here’s something you won’t find on a generic Ghost Controls page. Many Frisco subdivisions in the 75034 and 75035 ZIP codes were built with identical Ghost Controls TDS2 and TSS1 swing openers specified by HOA design guidelines. That means today we can roll one truck to a street and fix the same intermittent limit-switch fault on three adjacent driveways before lunch. That repeat-call pattern doesn’t happen in a city with varied gate hardware. It happens here because the HOA locked in the gate model, the gate weight, and the swing radius twenty years ago, and now every one of those units is hitting the same 15-to-20-year mark at the same time. The clay soil compounds it. Posts shift, limits drift, and a whole block of gates starts misbehaving the same week. We pre-map which subdivisions share the same gate model so a single truck roll closes multiple calls.
Last month our crew was called to a home on Hillcrest Road in the 75035 ZIP where a Ghost Controls TDS2XP dual swing opener would only open the left leaf. The right leaf would bump and reverse. We traced it to a partially stripped internal clutch on the right ARM motor, made worse by years of the right post leaning just out of plumb from Frisco’s clay shrink. We replaced the clutch assembly with OEM parts, realigned the post by shimming the hinge base, and synced both leaves. The gate was running true before the next HOA inspection.
Ghost Controls Models & Products We Service in Frisco
We service the full Ghost Controls residential lineup: the TSS1 and TSS1XP single swing openers, the TDS2 and TDS2XP dual swing openers, the SLD slide gate opener, and the GTR series solar-ready openers. For direct replacements we use OEM Ghost Controls boards, motors, and remotes. For high-wear items like hinges, brackets, and electrical connectors, we recommend proven aftermarket upgrades that outlast the originals under Frisco’s clay heave and UV exposure. We stock common Ghost Controls parts locally so most Frisco repairs happen same-visit, not days later.
Ghost Controls Service Pricing in Frisco
Ghost Controls repair in Frisco typically ranges from $160 to $380 depending on the failure. A limit switch calibration or remote reprogramming lands on the lower end. A replacement ARM circuit board with labor runs $240 to $340. A stripped gearbox or clutch assembly on a TSS1 or TDS2 usually sits between $280 and $380. Full operator replacement starts around $700 and up, and we only recommend it when multiple components show age-related failure at once or the gate’s weight has changed. Every price is quoted and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Frisco
Yes, many Frisco HOAs recorded specific gate models, weights, and swing radii in their design guidelines during the building boom, so a replacement operator must be spec-matched. We know which subdivisions in the 75034 and 75035 corridors share the same Ghost Controls model and color code, and we’ll spec the replacement to pass the next HOA review. Call (877) 610-2993 and tell us your subdivision. We’ll know what you’re working with.
Heavy rain swells the Blackland Prairie clay, which shifts your gate posts and throws the limit switches out of tolerance. The opener then stops short or over-travels. It’s the single most common repeat service call in Frisco. We realign the gate and recalibrate the limits in the same visit. Call (877) 610-2993 and we’ll schedule it.
If it was spec-matched when installed, yes, but twenty years of post drift and hinge wear changes the load. The gearbox now works harder than it did new. We inspect the hinge load and post alignment before recommending any repair, because replacing the opener without fixing the post just burns through another gearbox.
That pattern points to thermal heat-soak on the ARM circuit board, not the remote battery. Frisco’s 105°F afternoons push the board past its thermal limit and it drops signal until it cools. We test the receiver under load and replace the board if it’s failing. Get it checked before it quits entirely. Call (877) 610-2993 for a free estimate.
Under Frisco’s conditions, a Ghost Controls opener typically lasts 10 to 15 years before major component failure, but the ARM boards and limit switches often need service sooner because of heat and clay-driven post movement. With regular realignment and board inspection, we can extend that service life meaningfully. Call (877) 610-2993 and we’ll tell you what’s worth fixing.
Service Areas Near Frisco
We serve Frisco and the surrounding North Texas communities, including Frisco service area ZIP codes 75033, 75034, and 75035. For Ghost Controls owners outside North Texas, we also offer Ghost Controls service in Round Rock and Ghost Controls service in Seattle. If you’re nearby but not listed, call us. If we can’t get there, we’ll point you to someone who can.
Book Your Ghost Controls Service in Frisco Today
If your Ghost Controls gate is acting up, call (877) 610-2993 right now. A live person answers, 24/7. Hal Gatewood will talk you through what’s happening and schedule a time that works. Same-day service is available for most Frisco repairs. Call me directly. If I don’t pick up, I’ll call you back. Not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco since 2001.