Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Campbell
Gate repair in Campbell, CA typically costs $185-$420 for most hinge, post, and realignment work, and most repairs can be scheduled within one to two business days. If you’re in the 95008, 95009, or 95011 ZIP codes, we know exactly what your gate is up against: 50-year-old orchard-era ranch hardware, HOA approval rules, and the damp marine layer that eats unprotected metal. Call us at (877) 610-2993 and you’ll get Hal or a member of his crew, not a recording.
We’ve been fixing gates in Campbell long enough to know that the gate itself is rarely the whole story. The hinge post, the footing, the latch alignment, the opener’s control board: all of those fail on their own schedule. Our job is to find the actual cause, not just the symptom. When you call, we show up when we say we will, quote the price before any work starts, and stand behind the repair with a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Campbell’s Preferred Gate Repair Company
Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. That’s a strange thing in the trade these days, but it means the person who shows up to your house is the person who answers questions when you call back. No dispatch queue, no national call center. A live person answers the phone 24/7, because a gate jammed open at midnight is worth answering.
Campbell homeowners call us for the same reason neighbors recommend us: we repair what other companies want to replace. If a hinge post is rotted, we weld and reinforce it in your driveway rather than selling you a whole new gate. If an opener’s board is fried, we source the correct replacement for your brand. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry common parts in the truck so a Campbell repair doesn’t stall out waiting on a shipment.
We know the 95008 housing stock: single-story ranches from the 1950s and 60s with wide side-yard and rear gates. We know the HOA complexes along Camden Avenue and Winchester Boulevard. And we know the Los Gatos Creek Trail corridor, where moisture and tree roots create gate failures you won’t see in San Jose. That local knowledge means we diagnose faster and fix it right the first trip.
Our Gate Repair Services in Campbell
Electric Gate Repair
Electric gate problems in Campbell fall into two camps: opener failures and power/control issues. We replace burned-out motors, failed capacitors, and control boards on all major brands. But we also chase the less obvious culprits: a photocell misaligned by a shifted post, a keypad corroded by morning marine-layer damp, or a limit switch that lost its setting. We diagnose with a meter before we replace anything.
Automatic Gate Repair
Automatic gate repair in Campbell usually means the gate is either not opening, not closing, or opening on its own. Show us the gate closing on its own and we’ll show you where it’s failing. We repair swing and slide operators from Viking, Ghost Controls, DoorKing, and Elite, including safety edge replacement, loop detector problems, and remote programming. On Campbell’s older ranch properties, we often find the opener is fine but the gate itself has sagged enough to trip the safety sensors.
Hinge & Post Repair
On Campbell’s 1950s and 1960s ranches, the hinge post is the most common failure point. Original redwood posts set in shallow concrete footings 50-plus years ago are now rotting at ground level, especially on north- and west-facing runs that never dry out. A gate sags in the hinge post, not in the middle. We remove the rotted post, pour a new footing, and set new post-and-strap hardware without hauling away a gate that’s still perfectly good.
Gate Realignment
When your latch won’t line up or one side of the gate drags on the concrete, realignment is often the answer but not always by itself. On south-facing Campbell gates, September and October heat spikes bow wood frames like a matched set of warped planks. If the frame has racked, a simple latch adjustment will hold for a week and then fail again. We correct the sag, reinforce the hinge post, and then set the alignment so it stays put through the next heat wave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Campbell
We’re certified to service nine gate motor and opener brands, and for Campbell customers that matters because we carry common Viking, Ghost Controls, and DoorKing replacement parts in the truck. A Gate Repair call doesn’t have to stretch into two weeks waiting on a board from a distributor. If your Campbell HOA complex has an older DoorKing or Elite access system, we can source compatible components and handle the repair while keeping you informed on the management company’s approval requirements.
Common Gate Repair Problems We See in Campbell Homes
- Rotted hinge posts on 1950s-era ranch gates: The original post-and-strap hardware from the orchard-tract buildout era has reached the end of its service life. When the post rots at ground level, the gate sags and the latch no longer lines up, and repairing the hinges without addressing the post means you’ll fix it twice.
- Marine-layer corrosion on north-facing hardware: Campbell doesn’t sit in the fog like Daly City, but shaded north- and west-facing hinges and latches stay damp through summer mornings. Pivot pins freeze, bolts rust through, and gate locks get stiffer until the key finally won’t turn.
- Heat-racked wood frames on south-facing gates: Late-summer heat spikes can bow a solid redwood gate frame enough to pull the latch out of alignment. The fix isn’t just moving the latch; it’s correcting the rack and reinforcing the frame so the sun can’t do it again next year.
- Creek-side post heave and hinge corrosion: Properties near the Los Gatos Creek Trail run wetter and rootier than the rest of Campbell. Hinge posts heave as sycamore and willow roots push under the footings, and the extra moisture accelerates rust on every metal component. This one is Campbell-specific, and it catches new homeowners off guard.
Pricing for Gate Repair in Campbell, CA
Gate repair pricing in Campbell runs from about $185 for a simple latch adjustment or hinge tightening up to $620-$850 for a full post replacement with new footing and hardware. Electric and automatic opener work typically lands between $240 and $520, depending on whether it’s a board replacement, motor change, or sensor repair. Weld-and-rust repair on steel gates in the creek-side areas runs $150-$400, depending on the extent of the corrosion.
What moves the price in Campbell specifically: HOA approval timelines, access to the panel or post, and whether the failure is a symptom or the root cause. We quote the full price before any work starts, and the number we give you is the number on the invoice. You get $40 off any repair over $200, no trip charge anywhere in the county, and a free second opinion if you’ve got a written estimate from anyone else. Seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near Campbell
Our Gate Repair team works throughout the South Bay. If you’re in San Jose, Saratoga, Santa Clara, or Cupertino, call us at (877) 610-2993 for a free estimate. If you’re in Campbell, you’re already in our back yard, and that means faster scheduling and a tech who knows your neighborhood’s gate problems before he arrives.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Campbell
No, repair work on an existing gate that doesn’t change its style, height, or finish generally does not require HOA approval in Campbell, though some HOAs with strict architectural guidelines may want written notice anyway. Replacing a gate panel or changing the stain color or hardware finish usually does require approval, and we’ll tell you which category your job falls into before any work begins. Call (877) 610-2993 and we’ll walk you through what your specific HOA expects.
If the post is leaning, the hinges are almost never the root problem; the post has lost its footing or rotted at the base, and new hinges on a bad post will fail the same way. Fix the panel without the post and you’ll fix it twice. We dig out the old post, pour a new footing, and re-set the post plumb, then install fresh hardware. In most Campbell repair cases, the gate panel is still sound and stays right where it is.
That pattern usually points to a south-facing gate frame expanding and racking in the afternoon sun, which trips the opener’s safety sensors or changes the limit switch position enough to stop the cycle. It can also be a failing capacitor inside the opener that misbehaves when the unit heats up. Either way, we measure the gate’s movement and the opener’s output to find which one is the actual problem. Estimates are free.
Yes, in most cases we can keep one side of a dual-swing gate operational while we work on the other, and for slide gates we can usually complete the repair with the gate parked open and monitored. We’ve worked on HOA-managed systems along Camden Avenue and Winchester Boulevard where the property manager needs to approve the repair before we start, so we coordinate that upfront. Call (877) 610-2993 and we’ll check the access setup for your specific complex.
Yes, the Los Gatos Creek Trail corridor creates higher year-round soil moisture and aggressive tree root growth, and gates in those western Campbell neighborhoods heave posts and corrode hinges much faster than gates even a quarter mile east. The fix is a deeper footing with root barrier, plus corrosion-resistant zinc-plated hardware. On a 1960s ranch off Sharmon Palms Lane near the trail, our tech found a 12-foot redwood swing gate pulling its hinge post out of a cracked footing, with sycamore roots wedged beneath the base. We removed the old post, poured a new footing set back from the root zone, and installed fresh post-and-strap hardware with a Ghost Controls automatic opener and safety photocell, all coordinated with the owner’s HOA approval. That’s the difference between a Campbell-specific fix and a generic one.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Campbell since 2001.