Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tucker
If you live in Tucker and your gate has started dragging across the driveway or swinging loose at the hinge, the problem usually isn’t the gate itself. In this city, it’s almost always what’s underneath it. Tucker’s red clay soil expands and contracts through every wet and dry season, slowly shoving posts out of line until hinges bind, latches stop catching, and welds crack at the stress points. We see it weekly in neighborhoods off Lawrenceville Highway, Hugh Howell Road, and Lavista Road. Hal Gatewood has been fixing exactly this since 2001, and he welds on site so your gate never leaves your driveway. Call (877) 610-2993 and talk to a live person, any hour.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Parts & Welding Company
We’re a local, owner-operated shop serving Tucker and the surrounding communities. Hal Gatewood’s name is on the business, the address is published, and he’s not passing through. That matters here because Tucker’s gates have a specific failure pattern, and recognizing it means not charging you for work that won’t hold.
Customers in Tucker keep calling us back for three reasons. First, we repair before we replace. A residential gate from a 1970s Tucker ranch is often worth saving, and we’ll tell you straight if we can rebuild the hinge and post instead of selling you a new panel. Second, the 90-Day Done Right Promise is in writing on every job. If it isn’t right, Hal comes back and makes it right. No fine print, no runaround. Third, when you call, a live person answers. Not a voicemail, not a queue. That goes for 2 p.m. and 2 a.m.
We also give Tucker homeowners a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Those are standing offers. You don’t have to ask twice.
Our Gate Parts & Welding Services in Tucker
Our Gate Parts & Welding work covers the components that fail most often in Tucker’s older gate systems. Here’s what that looks like in practice.
Hinge Replacement
Hinges on Tucker gates are the first casualty of shifting clay soil. As the post leans, the hinge carries the entire weight of the gate at an angle it was never built for, and the leaf or the weld eventually gives way. We cut off the old hardware, align the gate to the post’s true position, and weld on new strap or barrel hinges rated for the panel weight. If the post has moved, we address that first, because replacing a hinge on a leaning post is like straightening a picture on a crooked wall.
Post Replacement
This is the repair Tucker homeowners often don’t know they need. In subdivisions across 30084 and 30085, brick pillars and steel posts were set shallow into red clay decades ago, often with no gravel base or deep anchor. Forty years of wet-dry cycling later, the post has drifted two or three inches. We dig out the old footing, set a properly bedded post, and only then rehang the gate. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Aluminum and ornamental iron gates in Tucker take rail damage from two sources: sagging frames and storm debris. The city’s mature hardwood canopy drops limbs during spring storms, and a falling branch can bend an upper rail enough to bind the gate against the post. We straighten or replace damaged rails, re-weld cracked joints, and reinforce weak sections with gussets where the design allows it.
Custom Welding
Some Tucker gates were built to fit a specific opening between two brick pillars, and you won’t find an off-the-shelf replacement that matches. Hal handles custom welding on site, fabricating brackets, repairing ornamental scrollwork, extending or shortening panels, and building reinforcement plates for cracked hinges. The gate stays in your driveway, and you can watch the work happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tucker
If your automated gate in Tucker runs on FAAC, BFT, Linear, or Viking hardware, we stock and source parts for all of them. We’re certified to service nine major gate brands, including LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you need a replacement rack gear, a hinge bracket, or a welded repair on a Viking arm, we can usually get the part and complete the job without multiple trips. And because we weld on site, we can adapt components to fit older Tucker gate layouts that modern kits assume don’t exist.
Common Gate Parts & Welding Problems We See in Tucker Homes
- Heaved brick pillars. In Tucker’s older subdivisions, stone and brick entry pillars were routinely set with shallow footings directly into red clay. After 30 to 40 years of soil movement, many have migrated enough that a gate that fit perfectly in 1982 now drags by late summer. The hinge repair only holds if the post settles get addressed.
- Cracked hinge welds on original gates. Ornamental iron and aluminum swing gates from the 1960s and 1970s were often fabricated with lighter hinge welds than modern standards require. Decades of stress from soil movement and daily use finally opens hairline cracks that grow until the weld fails completely. This is one of our most common welding calls in Tucker.
- Retrofit operators on old pillar hinges. Many Tucker ranches now have automated openers bolted onto gate frames that were never designed for mechanical force. The motor pulling against a misaligned hinge or a settled post accelerates every failure we mentioned. We check the full load path before replacing any part.
- Storm-impact frame damage. Tucker’s tree canopy is one of its best features, and one of its hardest on gates. Limbs fall in spring thunderstorms, bending upper rails and knocking gates off their tracks. If a storm has pushed your gate out of line, call before you force it, because forcing a racked panel against the operator can strip the motor gear.
Pricing for Gate Parts & Welding in Tucker, GA
Here are honest numbers for Tucker’s market. A standard hinge replacement on a residential swing gate runs $180 to $340, including cutting off the old hardware, aligning the gate, and welding new hinges. A steel post replacement with proper concrete bedding typically runs $450 to $850, depending on depth and whether we’re matching an existing brick pillar. Rail repair and straightening runs $150 to $400, and custom welding jobs are quoted by the hour at $85 to $120, with most small fabrication work finishing in under two hours. The price is always quoted and agreed before any work starts. You’ll never see a bigger number at the door. Call (877) 610-2993 for a free, no-pressure quote.
We Also Serve Cities Near Tucker
If you’re just outside Tucker, we cover Clarkston, Mountain Park, Stone Mountain, and Chamblee from the same local crew. We also handle full Gate Repair in Tucker and Gate Installation in Tucker when the job calls for more than parts and welding. Same live phone, same 90-Day Done Right Promise.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tucker
For hinge failures, broken welds, and security-critical repairs, we can typically reach any Tucker address the same day you call, because our crew works this side of the metro. Dispatch and scheduling coordinate from the Atlanta office, but the truck that shows up at your Tucker home is local to the area. Call (877) 610-2993 and we’ll tell you the window before you hang up.
Yes. We work throughout 30084 and 30085, from the older subdivisions along Brockett Road and Idlewood Road to newer streets off Chamblee-Tucker Road. If you’re inside Tucker city limits or just across the line in unincorporated DeKalb, we can get to you.
Yes. A live person answers our phone 24 hours a day, seven days a week, and we don’t route you through an answering service. If a failed hinge weld has left your driveway unsecured at midnight, we’ll talk through the problem and get someone there. Emergency weld calls in Tucker are billed at standard rates, not inflated weekend numbers.
No. Tucker pricing runs in the same range as Clarkston, Mountain Park, Stone Mountain, and Chamblee: hinge work $180 to $340, post replacement $450 to $850, custom welding $85 to $120 per hour. What changes the quote is the condition of the soil and the existing post, and Tucker’s clay movement means we may recommend addressing the footing before welding on new hardware. That’s not an upsell; it’s the difference between fixing it once and fixing it every year.
Every job carries the 90-Day Done Right Promise in writing. If the weld cracks, the hinge loosens, or the repair doesn’t hold up during that window, Hal returns and fixes it at no charge. It’s stated plainly on every invoice, not buried in fine print. Call (877) 610-2993 and ask about it before you book, if you’d like to hear it from us first.
Contact Gatewood Fence & Gate in Tucker
If your Tucker gate is dragging, leaning, or that hinge weld has finally let go, don’t guess at the fix and don’t force the panel back into place. Call (877) 610-2993 now. A live person answers, we’ll talk through what you’re seeing, and we’ll quote the work before we touch a tool. Free estimates, upfront pricing, and Hal’s name on the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker and the surrounding DeKalb County communities since 2001.