Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tucker
A gate that won’t swing, sags into the driveway, or refuses to open from the road isn’t just a nuisance. It’s a security problem. In Tucker, gate repair typically runs $180 to $340 for hinge and alignment work, $250 to $550 for automatic opener repairs, and $400 to $900 when a brick pillar has shifted and the post footing needs resetting. We’re Gatewood Fence & Gate, and we’ve been fixing gates like we’d fix our own since 2001. Call (877) 610-2993 and you’ll get a live person, not a menu.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Repair Company
There’s a reason homeowners across Tucker keep our number. Hal Gatewood’s name is on the shop, and when you call about a gate that won’t close at midnight off Lawrenceville Highway or a sagging iron panel on a ranch home near Idlewood Road, you’re talking to someone who treats the job like it happened at his own place. We answer the phone around the clock. Not a voicemail, not a call center three states away. A live person who knows what a one-piece hinge post from a 1970s swing gate looks like.
Tucker specifics matter to us because we’ve worked every part of this city, from Midvale Road to the neighborhoods off Hugh Howell and Brockett. We know which homes still have the original iron swing gates, which subdivision pillars were poured wrong, and which sections of red clay give everyone the same heaving trouble. Our crew lives and works in the area, so when we tell you we’ll be there in a window, we actually show up. We hold a current license and insurance, and we’ll give you our published shop address before we ever set foot on your driveway.
You don’t need to take our word for it. Ask a neighbor. Tucker is the kind of place where folks still talk over fences, and word gets around when a repair company leaves a gate worse than they found it. We’ve earned a strong local reputation by doing the opposite: showing up, fixing the actual problem, and standing behind every job with a 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. That’s not a tagline. It’s how we’ve stayed busy for over 29 years without a big marketing budget.
Our Gate Repair Services in Tucker
Hinge & Post Repair
Here’s what we see constantly in Tucker: a swing gate that someone re-hung two years ago is sagging again, and the homeowner is told the hinges were cheap. They weren’t. The pillar moved. Those 1960s brick entry pillars in 30084 and 30085 were set on shallow footings directly into expansive red clay, and after 40 years of wet summers and dry winters, the post has crept two or three inches out of plumb. Fix the hinge without the post, and you’ll fix it twice. We dig the footing, reset the post in a deeper gravel bed with a concrete anchor, then hang the gate so it swings true. Hal has seen too many gates that sag in the hinge post, not in the middle, and that’s where we start.
Gate Realignment
A gate that scrapes the driveway on every cycle or has to be lifted to latch is one our Gate Repair crew fixes every week in Tucker. The cause is rarely the panel itself. Around here, Georgia clay heaving drives posts out of alignment, and storm damage from falling limbs bends frames. We realign the leaves, rebuild hinge boxes where they’ve worn oval, weld any fatigue cracks, and set latch hardware back to where it actually catches. A gate that closes on its own without being pushed is the goal, and we test it through at least twenty full cycles before calling the job done.
Automatic Gate Repair
Lots of Tucker homeowners have retrofitted modern openers onto gates built before automation existed. Those older pillars and hinge points weren’t designed for the torque of an electric arm, especially not a heavy ornamental iron leaf. The result is an opener that strains, trips, or strips a gear every couple years. We service LiftMaster, FAAC, BFT, Linear, Viking, and more, but we also look at the mechanical side first. No opener will last long if the gate it’s pushing weighs more than it should because a wheel is flat or a post has shifted. We get the gate swinging freely first, then repair or replace the operator.
Electric Gate Repair
When your gate won’t open from the keypad or the remote stops working at the end of the driveway, the fix might be a bad capacitor, a failed circuit board, water in the keypad housing, or a safety photo eye knocked out of alignment. We carry common boards, remotes, and motors for the brands most installed across Tucker, including FAAC and Linear, so we’re not waiting a week for parts from a regional warehouse. We bench-test the board before charging you, and we’ll show you the failed part when we’re done. Upfront pricing means the number we quote is the number on the invoice. No surprises at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tucker
If your opener came with the house, it’s probably one of the big names: LiftMaster, FAAC, BFT, or Linear. We’re certified to service nine major gate brands, and we keep local stock of the parts Tucker homes actually use: arm brackets for LiftMaster swing arms, board fuses for FAAC, belt kits for BFT, and remotes for Linear and Viking. That means a shorter wait for a repair that most companies want you to turn into a replacement. We weld on site, we bench-test what we can before condemning it, and we don’t upsell you a whole new operator because a limit switch failed.
Common Gate Repair Problems We See in Tucker Homes
Here are the four calls we answer most from Tucker residents, and why they happen here:
- Heaved, leaning brick pillars. The red clay under those 1960s-1980s entry pillars expands and contracts through wet and dry seasons. A pillar that started dead level has often moved two or three inches over 40 years. That puts the hinge post out of plumb and the gate starts binding or scraping. This is not a hinge problem, and replacing hinges won’t fix it.
- Storm-bent gate frames. Tucker’s mature hardwood canopy is beautiful until a summer storm drops a limb on your front gate. Ornamental iron panels and welded frames bend beyond what hinge adjustment can correct. We can often straighten and re-weld the frame on site instead of replacing the whole gate.
- Retrofitted openers failing early. A newer LiftMaster or FAAC opener bolted onto a 1975 pillar and a gate leaf that hasn’t swung freely in years is a chronic failure waiting to happen. The opener gets blamed, but the real problem is the gate itself. We correct the mechanical alignment before touching the motor.
- Power issues on long driveways. Some Tucker properties run on acreage or have long pulls from the road with no outdoor outlet at the gate. We see extension cords buried under mulch, chewed wires, and transformers that fried in a storm. A solar opener is often a practical fix for a 30084 or 30085 gate far from the house, and we’ll help you think through whether it fits your gate’s weight and daily cycles.
Pricing for Gate Repair in Tucker, GA
We want you to know what a repair in Tucker actually runs so you can spot a phone quote that sounds too cheap or too bloated. A hinge rebuild or post shim on a standard single swing gate runs $180 to $280. Re-hanging and realigning a gate that has dropped or scrapes runs $200 to $350. Automatic opener repair, including a service call and common parts, runs $250 to $550. When a brick pillar has heaved out of plumb and we need to excavate, reset the post, and repoint the masonry, expect $400 to $900 depending on access and footing depth.
We give you the full price before any work starts, and that’s the price on your invoice. No trip charge inside the county, and we’ll deduct $40 off any repair over $200. Bring us a written estimate from another company, and Hal will give you a free second opinion. Veterans and seniors always get 10% off, permanently. Call (877) 610-2993 for an exact quote; estimates are free, and we’ll tell you straight if the gate needs repair or honestly doesn’t.
We Also Serve Cities Near Tucker
While this page covers Gate Repair in Tucker, our crews also work nearby in Clarkston, Mountain Park, Stone Mountain, and Chamblee. If your gate is a few miles outside the city line, give us a call. You’ll still get the same owner-operated service and the same 90-Day Done Right Promise.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Tucker
Because the hinge post has likely moved, not the hinges. In Tucker’s established subdivisions, those 1960s and 1970s brick pillars were poured with shallow footings directly into red clay. The clay heaves, the pillar migrates, and the gate sags again within a year or two. Replacing hinges on a post that’s out of plumb is a temporary patch. The durable fix is resetting the post footing and then re-hanging the gate. Call (877) 610-2993, and we’ll dig into the actual footing and show you what’s moved.
In most cases, yes. We don’t rebuild pillars unless the masonry itself is cracked and crumbling. If the pillar is structurally sound but slightly out of plumb, we address the gate’s mechanical alignment first, then mount the operator with reinforcement plates designed for older brick. The key is choosing an opener rated for your gate’s weight and swing length, and not asking the motor to overcome a gate that was never aligned properly. We’ll give you an honest assessment rather than a sales pitch.
Yes, with the right conditions. Tucker gets enough year-round sunlight for a properly sized solar panel and battery bank to run a light to medium swing gate. If your gate is heavy ornamental iron or cycles more than 15 to 20 times a day, we’ll recommend a larger battery bank or a hard-wired run to be safe. We set up several solar gates each year on long driveways in the 30084 and 30085 area, and we’ll size the system for your gate, not a chart in a catalog.
Usually, yes. We weld on site, and a bent top rail or a twisted stile on an ornamental iron gate can often be heated, straightened, and welded back to true. That’s the repair-first work we do most. If the frame is fractured through at a weld and the steel is compromised, we’ll tell you honestly and quote a replacement section rather than a whole new gate. Bring us your insurance estimate and we’ll work with the number honestly.
Probably not, unless it’s been updated. Modern safety standards require monitored photo eyes or contact edges that reverse the gate if a child, pet, or car is in the path. Many older installations in Tucker predate those requirements. The danger is real: a moving gate can injure or trap someone, especially a child. We inspect every automatic gate we repair for missing or non-functioning safety devices and bring it up to current code as part of the job. If you’re not sure what’s protecting your gate, call us and we’ll check it.
Call Gatewood Fence & Gate for Gate Repair in Tucker
Most gate repairs in Tucker are fixed in one visit. Some pillar resets and weld jobs take a little longer, but you’ll know exactly what you’re paying and when we’ll be there before we start. We answer calls around the clock. If your gate won’t close tonight, don’t leave your property open until Monday. Call (877) 610-2993 and ask for Hal. He’ll give you a straight answer and a real number, just like he has since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker since 2001.