Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Mount Vernon
A gate motor and opener in Mount Vernon usually runs $650-$1,400 for a slide motor retrofit on an existing iron gate, and most repairs fall between $180 and $400. Hal Gatewood and his crew work Mount Vernon blocks every week, from the South Side to Fleetwood, and we answer the phone live around the clock at (877) 610-2993. If your gate won’t open, a motor is grinding, or you’re tired of wrestling a 90-year-old iron gate by hand, call us and we’ll tell you straight what it’ll take and what it’ll cost before any work starts.
Why Gatewood Fence & Gate Is Mount Vernon’s Preferred Gate Motor & Opener Company
We’ve been fixing gates since 2001, and Hal Gatewood’s name is on the shop. That means something on blocks where a handshake still counts. Mount Vernon homeowners call us because we understand what they’re dealing with: pre-WWII brick rowhouses, shared driveways, and ornamental iron gates that have been opening and closing since before the Cross County Parkway existed. When a gate motor fails on a two-family home off South Fulton Avenue, the person who shows up is someone who works on that exact housing stock every week.
Our crew stocks period-appropriate hardware for Mount Vernon’s legacy gates: drop rods, weld-on hinge pins, flat-bar stock, and rack segments sized for the narrow setbacks common on attached lots. That’s why we can often close a job the same day that another company has to reschedule. We’re insured and bonded, background-checked, and every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
We also answer the phone with a live person 24/7. Not a voicemail. Not an automated menu. You call, a human picks up, and if you need someone in Mount Vernon that day, we tell you honestly whether we can get there and when.
Our Gate Motor & Opener Services in Mount Vernon
Motor Repair
The most common call we get in Mount Vernon is a gate motor that’s bound, stripped, or burned out. On pre-war rowhouse lots, the original hinge post has usually heaved from decades of freeze-thaw, and the motor is working against a gate that no longer travels straight. We repair the motor and fix the alignment underneath it, because a new motor on a shifted post is a repair you’ll pay for twice. Call (877) 610-2993 and describe what you hear when you press the button; Hal can often diagnose it over the phone.
Motor Installation
Putting a motor on a Mount Vernon gate is rarely a simple bolt-on. Most existing gates are 70-100 years old, ornamental, and built to swing on original iron hinges. We fabricate brackets on site, reinforce the post, and set new footings where the old concrete has cracked. The result is a motorized gate that opens smoothly and doesn’t overload its own operator.
Linear Motor Service
Linear motors are a common choice for Mount Vernon slide gates because they don’t need a swing arc, which matters when your driveway is eight feet wide and your neighbor’s wall is four feet from the property line. We service Linear operators and stock common wear parts, so repairs are usually same-day in Mount Vernon rather than a week of waiting on a part.
Slide Motor Service
Slide gates are the practical answer on Mount Vernon’s tight lots, and the slide motor is the part that takes the most abuse. Road salt spray off the street, seasonal post movement, and years of travel over a cracked track all take a toll. We repair slide motors, replace rack and pinion segments, and align the track so the gate doesn’t fight itself every time it moves.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Vernon
We service nine major gate motor brands, and the ones we see most often in Mount Vernon are Linear, Viking, Ghost Controls, and DoorKing. We keep control boards, remotes, photocells, and common drive parts for these brands on the truck, so a repair doesn’t mean two weeks waiting on a distributor. If you’ve got another brand, call anyway. Hal has been inside most operators on the market and he’ll tell you straight whether it’s worth repairing or time to replace.
Common Gate Motor & Opener Problems We See in Mount Vernon Homes
- Freeze-thaw post movement: Mount Vernon sits in Westchester’s freeze-thaw zone, where temperatures cross the freezing mark dozens of times each winter. Concrete footings heave, iron posts shift, and the gate starts binding mid-travel, which trips the motor’s obstruction sensor and eventually burns out the gear. We reset the post, then the motor.
- Shared driveway misalignment: On attached homes and two-family lots, the property line often runs directly under the gate. If the slide track shifts even an inch onto the neighbor’s side, the gate binds and the operator loses its travel limits. We survey the setback and reset the track so both properties stay clear.
- Road salt corrosion on corner lots: Salt spray from Mount Vernon’s dense street grid accelerates rust on the operator arm and motor bracket, especially on corner-lot gates within six feet of the curb. The arm seizes, the gear strips, and the motor burns out. We replace the bracket and arm with corrosion-resistant hardware and treat the area so it lasts.
- Aging iron hardware failing block by block: On many South Side and Fleetwood blocks, nearly every attached home was built in the same 1920s-1940s era, which means the same original hinge pins and drop rods are failing across an entire street at once. We stock period-appropriate weld-on pins and flat bar so we can fix your gate without ordering parts another company doesn’t even know exist.
Pricing for Gate Motor & Opener in Mount Vernon, NY
Here’s what you can expect to pay in Mount Vernon’s market. A slide motor repair runs $180-$400 depending on whether it’s a control board, a gear, or a full motor replacement. Linear motor installation on an existing gate runs $650-$1,100. A full slide motor retrofit with rack and pinion, safety photocells, and a loop detector runs $1,200-$2,400 on a typical Mount Vernon rowhouse gate. Battery backup units add $400-$800. Intercom integration with keypad entry runs $350-$900 depending on wiring access on an old brick wall. Every price is quoted in writing and agreed before we start work. No surprise invoice at the door. We also offer $40 off any repair over $200, no trip charge inside Westchester County, a free second opinion on any written estimate you’ve already received, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
How We Handle Mount Vernon’s Tight Lots and Legacy Gates
On Mount Vernon’s pre-WWII brick rowhouse streets, where many attached homes still have their original 70-100-year-old iron gates, adding a gate motor usually means retrofitting a slide operator onto an existing ornamental gate and rebuilding its hinge post and footing, not installing a new suburban swing gate system like towns further north in Westchester. That’s the work we actually do here. A gate on a 30-foot-wide lot near Fleetwood doesn’t have room for a swing arc, so the answer is a slide motor on a rack and pinion track set tight against the wall. The post has to be dead level, the track has to clear the neighbor’s setback, and the operator’s travel limits have to be set so the gate stops exactly where it should, every time.
We had a job on a South Side block off South Fulton Avenue where the homeowner needed a motor on an ornamental iron driveway gate original to a 1930s two-family home. The hinge post had heaved from freeze-thaw and the gate was binding mid-travel. Our crew cut out the old post footing, set a new one with correct embedment, built up the post with plate, and mounted a linear motor with a safety photocell and loop detector. We finished by integrating a keypad entry on the shared wall and left the pedestrian gate on its original drip bar, so the tenant’s walkway access never stopped working. That’s the kind of job you can’t order from a catalog.
We Also Serve Cities Near Mount Vernon
If you’re just outside the city line, we also cover Pelham, Pelham Manor, Wakefield, and Woodlawn. The same crew that works Mount Vernon handles those neighborhoods, and we know the housing stock and the gate types on those blocks just as well. Whether you’re in the 10550 zip or just over the border, call and we’ll get you on the schedule.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Mount Vernon
Yes, and that’s exactly what we do most days in Mount Vernon. The gate itself is usually worth keeping; it’s the post, the hinges, and the footing that have failed. We reinforce the post, weld on new hinge pins rated for the added weight, and mount a slide motor or linear motor to the existing gate frame. You keep your original ironwork and the curb appeal that came with it. Call (877) 610-2993 and we’ll tell you what your specific gate needs.
We install the slide track on our side of the property line, set the rack and pinion tight against the wall, and program the travel limits so the gate stops short of the neighbor’s setback. We also survey the drainage so the track doesn’t sit in water, which is a common problem on shared driveways where runoff pools after a storm. Free estimates, and no trip charge inside the county.
The most likely cause is freeze-thaw movement in the post, which makes the gate bind mid-travel and trips the operator’s obstruction sensor, causing it to reverse. On corner lots, salt corrosion on the arm or bracket can also cause irregular resistance that the motor reads as an obstruction. We’ll check both. Repairs usually run $180-$400 depending on what’s failing. Call (877) 610-2993 and describe the reversal pattern; Hal can usually narrow it down over the phone.
Yes, and we recommend it for Mount Vernon homes where the gate is the main vehicle access and storms knock out power a couple times a year. A battery backup unit runs $400-$800 installed and keeps the gate operating through most outages. We install it at the operator and test it under load before we leave. Every price is quoted before work begins.
Yes. New York State references UL 325 and ASTM F2200 standards, which require entrapment protection on automated gates, including photocells, contact edges, or a loop detector. We install the required safety devices on every motorized gate job in Mount Vernon and test them under real conditions. If you’ve got an older motorized gate without working entrapment protection, call us; that’s a safety issue that shouldn’t wait.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Mount Vernon
If you’re reading this from a Mount Vernon porch with a gate that won’t open, call (877) 610-2993 right now. A live person answers, day or night. We’ll give you a straight answer on what’s wrong, what it costs, and when we can be there. Free estimates, upfront pricing, and Hal Gatewood stands behind every job with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop has been serving this area since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Vernon since 2001.