Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tucker
Gate installation in Tucker, GA runs between $1,400 and $4,800 for a standard driveway gate, depending on the width of your entrance, whether you want a swing or sliding design, and whether we’re adding an automated operator. Most jobs in Tucker take one to two days once materials are on hand. If you live off Fellowship Road, Hugh Howell Road, or in one of the older subdivisions off Lavista Road, you already know the drill: your existing pillars lean, your gate drags, and you want a fix that won’t repeat itself in three years. That’s what we do. Call (877) 610-2993 and Hal Gatewood will walk your property with you, look at the soil and the pillars, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Installation Company
Hal Gatewood has been doing this since 2001, and he still answers the phone himself. Our shop is locally owned and owner-operated, with a published address and license number anyone can look up. When you call, a live person picks up, 24 hours a day. Not a voicemail. Not a call center. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.
We’ve installed gates across Tucker’s 30084 and 30085 zip codes long enough to know what happens to a gate here. The red Georgia clay expands and contracts through every wet and dry cycle, and it doesn’t stop just because somebody poured a shallow footing in 1972. That’s why we don’t just hang a gate and leave. We reset posts where they need resetting, we weld on site so the gate stays in your driveway, and every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround.
Our Gate Installation Services in Tucker
Driveway Gate
Most Tucker driveway gates we install are swing gates mounted to existing brick or stone pillars, and that’s where the trouble usually starts. A lot of those pillars went in with shallow footings straight into clay, and they’ve moved. We’ll tell you honestly whether the pillar needs a new footing or whether we can work with what’s there. Our Gate Installation team welds hinges and mounts operators on site, so you won’t watch your gate get hauled off on a trailer. The install happens in your driveway, where you can see the work as it happens.
Pedestrian Gate
A pedestrian gate in Tucker often shares a post with the driveway gate, which means any shift in that post affects both. We build pedestrian gates to match the existing ironwork or aluminum style common in Tucker’s 1960s and 1970s ranches and split-levels. If the post has migrated, we address that before hanging anything, because a gate that drags today will sag worse by next spring.
Sliding Gate
Sliding gates make sense on Tucker lots where the driveway slopes toward the street or where a swing gate would block your own vehicle. They also handle wide entrances better than swing gates, which matters if you’ve got a long gravel drive off a road like Fellowship. We install the track or cantilever system, set the motor, and make sure the gate doesn’t bind when the ground shifts through the seasons.
Swing Gate
Swing gates are the most common gate style in Tucker’s older neighborhoods, and they demand a solid hinge post. If your post flexes, the gate sags, the operator strains, and you’ll fix it twice. We size the operator to the gate’s actual weight and span, not to a generic chart. A wide farm gate off a gravel drive needs a different operator than a narrow ornamental gate at the end of a manicured lawn.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tucker
We install and service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tucker customers, that means if your existing opener fails, we can usually match it or upgrade it without waiting on a backorder. We keep common parts on hand, and because we weld on site, we’re not waiting on a shop to fabricate brackets before your driveway works again. If you’ve got a Viking or DoorKing operator that’s been limping along, call us and Hal will tell you straight whether it’s worth repairing or replacing.
Common Gate Installation Problems We See in Tucker Homes
- Heaved pillars from red clay expansion. The same soil that makes Tucker’s hardwoods grow also moves under your gate posts. A pillar poured shallow in the 1970s has almost certainly drifted out of plumb. Hinging a new gate to it guarantees a repeat failure within a few wet-dry cycles.
- Swing gates undersized for the span. Wide farm entrances off gravel drives need an operator that doesn’t stall when the gate is heavy and the wind pushes back. We see gates hung with residential-grade openers that burn out within a year because nobody sized the operator to the actual load.
- Solar openers shaded by mature oaks. Tucker’s hardwood canopy is beautiful until spring foliage blocks a solar panel mounted in winter sun. A gate opener can drain its battery and leave the gate dead exactly when storm season starts. We site solar panels where they’ll actually get light, and we add battery capacity when the canopy wins.
- No loop detector for exiting traffic. Delivery trucks, horse trailers, and work vehicles sit at the gate with no automatic open trigger. A buried loop detector solves that, but a surprising number of Tucker gates were installed without one.
Pricing for Gate Installation in Tucker, GA
A standard single driveway swing gate with a basic operator in Tucker runs $1,800 to $3,200. A double gate or wide farm entrance runs $2,800 to $4,800, more if we’re setting new posts in fresh concrete footings. A pedestrian gate starts around $1,400 with hardware. These are honest numbers for our market, not a starting price that changes at the door. The price is quoted and agreed before any work starts, and it doesn’t move unless your scope changes and you approve it first.
What affects cost: gate width and weight, whether we’re resetting pillars, the operator brand, and whether you want a loop detector or keypad. We offer free estimates, no trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you the exact number for your gate.
We Also Serve Cities Near Tucker
In addition to our work across Tucker, we handle gate installation for neighbors in Clarkston, Mountain Park, Stone Mountain, and Chamblee. Same local crew, same 90-Day Done Right Promise, same live person on the phone. If you’re anywhere in this corner of the metro, you’re close enough that Hal will come look at your gate himself.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tucker
Yes. Tucker’s expansive red clay heaves and shrinks through every season, and a shallow footing lets the post migrate over time. For a wide farm gate off a gravel drive, we dig a deeper footing with a gravel base and set the post in concrete so it won’t pull out of plumb. A gate sags in the hinge post, not in the middle, and that is where we start. Call (877) 610-2993 for a free look at your footing depth before you hang anything.
Yes, but the panel has to be placed where it actually gets sun year-round, not just in winter when the oaks are bare. We installed a solar gate opener on a long gravel driveway off Fellowship Road where running power to the gate would have meant trenching through tree roots. The panel went on a post clear of the canopy, and we used a larger battery to carry the gate through cloudy stretches. If your driveway is fully shaded, we’ll tell you before you spend money on solar. Estimates are free.
A residential opener off a store shelf won’t last on a heavy farm gate with a long swing arm. We size the operator to the gate’s actual weight and span. For wide farm entrances, we typically use a LiftMaster LA400 swing arm or a heavier linear actuator, paired with a buried loop detector so delivery trucks and trailers exit without a keypad. If the post flexes, the strongest operator in the world won’t save it, so we check the post first. Call (877) 610-2993 and Hal will spec it for your gate, not a catalog.
Start with a gate the animals can’t visibly shift. A flimsy aluminum panel invites pushing, and every flex knocks the opener’s limits out of alignment. We can weld in a reinforcement bar or install a heavier steel frame. For gates near pastures, we also recommend setting the opener’s force limits conservatively so it stops rather than fights a leaning animal. That’s a five-minute adjustment, but it saves the gearbox.
Yes. A photocell, or safety edge, stops the gate if a person, pet, or vehicle is in the path. It’s not about how often you use the gate; it’s about what happens the one time something is in the way. We install safety sensors on every automated gate we build in Tucker, and we test them before we leave. Call (877) 610-2993 for a free estimate, and we’ll walk you through exactly what your gate needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker since 2001.
Ready to get your gate done right? Call (877) 610-2993 now. Hal will answer, he’ll listen, and he’ll give you a straight price before any work starts. Free estimates, written quotes, and a 90-Day Done Right Promise that’s stamped on every job.