Gate Repair in North Hollywood - Same-Day Repair, Priced Before We Start

Gate Repair in North Hollywood, CA

Gate repair in North Hollywood comes down to one thing: the hinge post fails, the track warps, or the motor burns out in the heat, and the gate stops moving. This is the densest per-capita gate-repair market in the metro, and it’s not close. We run calls here daily through 91601, 91615, 91616, and 91618, and the person who answers your call at (877) 610-2993 is a live human who can talk through what you’re seeing before we even roll a truck. Most jobs here land between $180 and $600, depending on what gave out.

Call (877) 610-2993

Why North Hollywood Homes Are Different

North Hollywood sits in the San Fernando Valley’s topographic bowl, and in July and August the street temperature regularly hits 105 to 110 degrees, sometimes 20 to 30 degrees hotter than the Westside on the same afternoon. That is not a trivia fact. It warps steel slide-gate tracks, degrades vinyl wiring insulation faster than anywhere else in LA County, and cooks the electrolytic capacitors inside older opener control boards. We routinely open motor housings on apartment gates retrofitted in the 1990s and find capacitors swollen to twice their normal size.

The housing stock compounds the problem. North Hollywood has one of the densest concentrations of 1960s to 1980s stucco apartment buildings with tuck-under parking in the metro, and most of those automatic slide gates were added during the security boom of the 1990s. That means the average gate we service here is 30 to 40 years into its life, on a narrow lot, cycled dozens of times a day by tenants, and often owned by someone who does not live on site. By the time we’re called, the gate has usually been failing for weeks. Along Lankershim and Vanowen, it’s common to find gates zip-tied open after a motor died and nobody reported it. That’s the reality of this market.

Gate Repair in North Hollywood

Gate Repair in North Hollywood is, most weeks, our busiest trade in this city. The call usually starts with “it worked yesterday,” and by the time we arrive, a tenant has propped the gate with a brick or a car has nudged it half off its track. We repair the gate where it sits, in your driveway or your parking entrance, and we don’t recommend replacement unless the steel is genuinely beyond saving. Hal’s been fixing gates since 2001, and the philosophy hasn’t changed: fix the gate, don’t sell a new one.

A gate sags in the hinge post, not in the middle, and that is where we start. On the 1960s-era apartment stock off Lankershim and Vanowen, those posts were often set in masonry that was never reinforced for the weight of a steel gate panel. Fix the panel without the post and you’ll fix it twice. We reset posts in concrete, weld on site, and leave the gate square.

Slide Gate Track Realignment

The heat affects everything here, and slide gate track is the clearest example. Track aligned in March is not aligned at 107 degrees in July. Steel expands, and on the narrow lots common across 91616 and 91618, there’s nowhere for that expansion to go except out of alignment. A gate that slides smoothly at dawn can bind and groan by 3 p.m. We realign the track, re-anchor loose sections, and true the rail so the gate does not fight the wheels. Slide gate track re-alignment in North Hollywood runs $180 to $350 depending on damage and track condition.

Hinge Post Re-setting

Swing gates on the postwar bungalows in 91601 and 91615 were, in many cases, hung on barrel hinges that were undersized from day one. Forty or sixty years later, the post has rusted, the hinge has pulled free, and the gate drags on the driveway. We saw the old post, core the footing, and set a new one in concrete at a depth these shallow original installs never used. Expect $275 to $600 including on-site welding, and that holds for steel posts in concrete.

Opener Repair

A dead opener on a North Hollywood apartment gate rarely means the whole operator needs replacing. More often, the capacitor has swollen from repeated heat cycles, or a limit switch is burned, or UV-baked wiring has finally lost continuity. We test the board, the receiver, and the antenna together before we replace anything. For most FAAC, BFT, and Linear models, a capacitor or limit switch replacement runs $140 to $260. If the motor is truly dead, we’ll show you the numbers side by side, and you decide.

How long does gate repair take in North Hollywood?

Most basic repairs, like a hinge replacement or a limit switch swap, take under two hours once we’re on site. A full post reset or slide gate track realignment can take half a day, and we’ll tell you honestly when you call. Repairs are scheduled same-day whenever we’re already working locally in North Hollywood.

Can you fix a sagging gate without replacing it?

Usually, yes. A sagging gate means the post or the hinges are failing, not the panel itself. We reset posts, weld heavier-gauge hinges, and square the gate in place. Replacement is the last resort, not the first pitch. Call (877) 610-2993 for an exact quote, and estimates are always free.

Gate Installation in North Hollywood

Gate Installation in North Hollywood runs the full spectrum, from a single swing gate on a bungalow off Vineland to an automated double slide gate for a 12-unit apartment building on Lankershim. We quote that range in writing before we touch a tool, and the number we hand you is the number you pay. Installation is measured, ordered, and scheduled. It’s not an emergency call, but we’ll come measure, hand you a written price, and get your gate ordered. Call (877) 610-2993 to schedule a free measure.

Driveway Gate Installation

A driveway gate on a North Hollywood bungalow typically starts around $3,200 for a single steel swing gate with manual hardware and runs up to $9,800 for a dual gate with automation on a wider lot. The biggest variable on this city’s postwar lots is how close the house sits to the property line. Many 1940s and 1950s homes have driveways that barely clear 10 feet wide, which means the gate post often has to go where a sewer cleanout or a sidewalk tree root sits.

Sliding Gate Installation

The sliding gate is the workhorse of North Hollywood’s apartment corridors. If your building is on Lankershim or Vanowen with tuck-under parking, you already know what a tenant-loaded slide gate handles every day. A typical automated slide gate install for a small to mid-size apartment property runs $5,000 to $9,500 with the motor, track, steel frame, and safety photo eyes included. We use commercial-grade track rated for the San Fernando Valley heat, because the cheap rolled track that works near the beach warps here by August.

Pedestrian Gate Installation

Pedestrian gates in North Hollywood see sun and hands in equal measure. We install them along side yards, between apartment buildings, and at rear alley access points east of Vineland. Expect $1,400 to $3,600 for a quality steel pedestrian gate with a proper welded frame and self-closing hardware. We account for the fact that many of these gates sit directly under stucco eaves that shed rainwater onto the hinges.

How fast can you reach North Hollywood for a gate installation?

We schedule installations across North Hollywood every week, and on urgent jobs we can usually be on site within 24 to 48 hours to measure. Same-day installation is not realistic because it involves a measure, a written price, and often a concrete pour. Call (877) 610-2993 and you’ll talk to a live person who can tell you exactly when someone can be at your property.

Do I need a permit to install a gate in North Hollywood?

Some installations do, and it depends on the structure. A straight gate swap with no new concrete or masonry work usually does not trigger LADBS review. An automated slide gate with new footings on an apartment property often does. We handle the permit path for structural work, and we’ll tell you on the measure whether yours needs one.

Gate Motor & Opener in North Hollywood

Gate Motor & Opener work in North Hollywood is where the valley heat shows up best. Wiring insulation bakes, capacitors fail, and motors work against warped track until something gives. Most motor repairs land between $180 and $420. Full replacement runs $1,100 to $2,600, and we can usually have a truck in front of your building the same day you call. We service Linear, FAAC, BFT, and Viking operators, among others.

Motor Repair

Most motor repairs in North Hollywood are $180 to $420, and the culprits are predictable: UV-baked wiring, failed capacitors from heat cycles, and stripped nylon gears inside the operator. When a gate motor works intermittently during a 105-degree stretch, it’s often a baked connection, not the motor itself. We trace it before we start swapping parts, because a sagging gate eats motors, and fixing the gate and the motor together means the repair actually lasts.

Slide Motor Replacement

Commercial and multi-unit slide gates along Lankershim and Vanowen see hundreds of cycles a day. Those operators fail after a tenant force-opens the gate, or the steel track expands in summer heat and the wheels bind. Slide motor replacement runs $900 to $2,200 depending on gate length and whether we need to weld a new rack in. We weld on site, and if the track is warped we straighten or replace it while the gate stays in your driveway.

Linear Arm Operators

Linear arm operators got spec’d on a lot of the swing gates North Hollywood homeowners installed in the 1990s. A replacement linear actuator job runs $650 to $1,500 depending on gate length and whether the original arm left the mounting bracket twisted. We’ll tell you honestly whether your existing arm is worth rebuilding. Sometimes it is, and we’d rather rebuild what’s in your driveway than sell you one you don’t need.

Why does my gate opener fail more in summer than winter?

Because steel expands in heat, and North Hollywood sits in the Valley’s heat bowl, regularly hitting 105 to 110 degrees. A slide gate track aligned in March may sit 20 to 30 degrees hotter on an August afternoon, and that expansion binds the rack and pinion. The motor draws more current every cycle until the board or motor fails. Call (877) 610-2993 and describe the symptoms; we’ll give you an honest range over the phone.

Can you come to North Hollywood today for a motor repair?

In most cases, yes. We run trucks in North Hollywood daily, so same-day repair is common. Full motor replacement usually schedules within a day or two once parts are confirmed. Call early and you’ll get a straight answer on timing, not a vague window.

Gate Access Control in North Hollywood

Gate Access Control in North Hollywood means keypads, remotes, phone entry, card readers, and intercoms that actually work in August heat, on gates that are often 30 or 40 years old. That’s the job. We know what fails here and why, and we install components that hold up to the Valley sun rather than one more unit from a big-box shelf. Every estimate is free, and the price is written before any work starts.

Keypad Entry

Keypad entry is the standard on North Hollywood’s apartment buildings and multi-unit properties. The older the building, the more likely the keypad was added during the 1990s security boom, and the more likely the wiring insulation has turned brittle from UV. We replace keypads outright, retrofit them onto existing operators, and wire them so they don’t fail when the heat spikes. A keypad retrofit on a slide gate runs $380 to $650 depending on the controller and how much wiring needs replacing.

Phone Entry Systems

Phone entry systems are common in North Hollywood’s rental corridors, especially where property managers live off-site or out of the area. A gate with a phone entry panel tied to an old analog line causes endless tenant complaints: missed calls, dropped rings, gates that won’t open. We convert old panels to work with VoIP and cell lines, or replace them with video intercom when the wiring is too far gone. Phone entry replacement runs $550 to $950.

Card Reader Installation

Card readers live or die on the quality of the install and the age of the controller. On North Hollywood’s commercial and mixed-use lots, a card reader that fails means the gate goes into constant-open mode, and that’s a security problem for a property that’s supposed to be gated. A single-door card reader install on an existing operator runs $420 to $780, and we do not charge a trip fee anywhere in the county.

Why do so many North Hollywood apartment gates get zip-tied open?

Because a remotely managed property has no one on site watching the gate. A motor dies during a heat wave, a tenant or handyman zip-ties the gate open so cars can get in, and no call is ever made. Weeks pass. We see this constantly in tuck-under parking buildings along Lankershim and Vanowen. Call (877) 610-2993 the moment you notice it; the fix is usually simpler and cheaper than the liability.

Can you retrofit an old 1990s gate operator to modern safety standards instead of replacing it?

Sometimes, and we’ll be honest about when. If the motor and gearbox are sound, we can add current safety edges, retro-reflective photocells, and a reversing mechanism that meets current standards without replacing the whole operator. If the board is fried or the gearbox is worn, retrofitting costs more than replacement. We’ll show you both numbers side by side.

Gate Parts & Welding in North Hollywood

Gate Parts & Welding is where Hal’s repair-first philosophy gets put to work. When a driveway gate tears loose from its hinge post or a slide gate jumps its rail, the repair usually comes down to the right part and a weld that holds. We do both on site, and we know the difference between a 1960s bungalow swing gate on Bellingham and a tuck-under parking gate on Lankershim that cycles forty times a day.

Hinge Replacement

North Hollywood’s swing gates, especially on the postwar bungalows in 91601 and 91615, sag because the original barrel hinges were undersized for the gate’s weight. We replace them with heavier-gauge steel hinges and weld the barrel in place where the old ones pulled free. A hinge replacement runs $140 to $260 depending on gate size and access, and it’s usually a thirty-minute job once the gate is blocked and true.

Post Replacement

A gate sags in the hinge post, not in the middle, and that is where we start. When a two-inch steel post has rusted through at the base or cracked from repeated slamming, patching it is wasted money. We saw the old post, core the footing, and set a new one in concrete to a depth the original 1990s installs rarely used. Post replacement in North Hollywood runs $480 to $1,400, driven mostly by whether the old footing needs to be cored out.

Rail Repair

For slide gates serving the stucco apartment complexes along Lankershim and Vanowen, the steel rail takes abuse every time a tenant’s car or a delivery truck clips it. Valleys in the rail, broken welds at splice points, and rails that have worked loose from their concrete anchors are the usual problems. We cut out the damaged section, weld in new rail, and true it so the gate doesn’t fight the wheels. Rail repair runs $380 to $900 per section.

Can you weld a gate back together, or will you just try to sell me a new one?

Our whole approach at Gate Parts & Welding is repair first. We weld on site, and Hal regularly fixes gates other companies wanted to replace. If the steel is structurally sound, welding is the right call and costs a fraction of a new panel. If the post is rotted through, he’ll tell you that too, and show you why before you spend a dollar. Call (877) 610-2993 with a photo and you’ll get a real answer.

What warranty do you offer on gate welding in North Hollywood?

Every job carries the 90-Day Done Right Promise in writing. If a weld fails or a hinge works loose within 90 days, we come back and make it right at no charge. It’s not fine print and it’s not “up to” 90 days. It’s 90 days, on every invoice, with Hal’s name on it.

Brands We Service in North Hollywood

We service FAAC, BFT, Linear, and Viking operators across North Hollywood, along with several other major brands. Common parts, like capacitors, limit switches, and replacement remotes, are stocked locally, which keeps most repairs to a same-day visit rather than a parts-order wait. See our brands for the full list.

Pricing for Gate Repair in North Hollywood, CA

Neighborhoods We Serve in North Hollywood

We run calls throughout North Hollywood’s ZIP codes: 91601, 91615, 91616, and 91618. Response time across the area typically runs same-day for urgent calls when we’re working locally, and we’ll give you an honest window when you phone in.

• NoHo Arts District
• Chandler Estates
• Valley Glen
• El Portal

Service Area - Cities Near North Hollywood

Gatewood Fence & Gate is based in Los Angeles and serves the surrounding Valley communities, including North Hollywood, CA and its neighbors: Valley Village, CA, Studio City, CA, Universal City, CA, Burbank, CA, and Valley Glen, CA. If your gate is on the border, call us and we’ll tell you straight whether we cover your block.

FAQs About Gate Repair in North Hollywood