Gate Repair in Moore - Same-Day Repair, Priced Before We Start

Gate Repair in Moore, OK

A gate that won’t close in Moore isn’t something you can put off until next week. It’s a security gap, a liability if you have kids or dogs, and after a spring storm rolls through, it’s often hanging by one hinge. Most gate repairs we handle across Moore run $180 to $340, and we can usually have a truck at your door the same day you call. Call (877) 610-2993 and you’ll get a live person, not a voicemail. We answer around the clock.

Call (877) 610-2993

Why Moore Homes Are Different

Moore sits at the epicenter of Oklahoma’s tornado corridor, and the land remembers. The 1999 F5, the 2003 twister, and especially the 2013 EF5 cut paths through this city that reshaped entire neighborhoods. Thousands of homes rebuilt after 2013 went up fast, and many got builder-grade wood or vinyl privacy fencing with matching swing gates. Those gates came with lightweight stamped hinges and push-button latches that were never meant to last past a decade. Now they’re all hitting the end of their service life at roughly the same time.

Then there’s the clay. Oklahoma’s shrink-swell soils heave and settle dramatically through wet and dry cycles, constantly shifting gate posts out of plumb and causing gates to sag, bind, or fail to latch. A gate that latched fine in May won’t catch in August, and that’s the soil, not the hardware. We’ll drive through a subdivision off SW 34th or near S Santa Fe Avenue and see four houses on one street with the same sag on the same side. That’s not a coincidence. It’s the same installer, same hardware, same post depth, and the same failure. When we learn the pattern on one gate in those post-2013 rebuild areas, we can usually diagnose the next one before touching it.

Gate Repair in Moore

When a gate stops closing at 11 p.m. or a spring snaps on a Sunday morning, you need someone who actually knows Moore, not a dispatcher reading from a script three states away. Most gate repairs we handle across Moore run $180 to $340, and we can usually have a truck at your door the same day you call. Hal Gatewood answers the phone like a neighbor, because he is one.

Our Gate Repair work covers everything from a dragging manual gate to a fried electric opener board. We don’t haul your gate off to a shop. We fix it in your driveway, and we quote the price before we touch a tool.

Electric Gate Repair

Electric gates in Moore take a beating from wind and weather, and the wet-dry cycle of Oklahoma clay does no favors to the underground wiring runs. We troubleshoot the full system: control boards, safety loops, keypads, remote receivers, and the motors themselves. If a storm surge fried a board on your LiftMaster or FAAC opener, we can usually have it running the same day rather than waiting for a parts order. Most electric gate repairs in Moore fall between $180 and $600 depending on whether we’re replacing a control board or a full motor.

Hinge & Post Repair

Here’s the truth most companies won’t tell you: a gate sags in the hinge post, not in the middle. Moore’s expansive clay soil heaves and settles constantly, and that movement is hardest on gate posts. We repair, reinforce, and when necessary reset posts in concrete, then hang the gate so it opens and closes with one hand. If your hinges are stripped, we weld new ones on site rather than hauling the gate away. A basic hinge replacement runs $120 to $220, while a full post reset with realignment typically costs $250 to $400.

Gate Realignment

When a gate drags on the ground or won’t latch anymore, the post has usually moved. Not the gate. Not the latch. The post. In Moore, where the soil shifts with every wet spell and dry spell, gate realignment is probably the most common single repair call we get. We don’t just adjust the latch and call it good. We reset the post, level the gate, and make sure it stays that way through the next rainy season. A gate realignment in Moore typically runs $250 to $400.

How fast can you get to my house in Moore?

In most cases, we can have a repair truck at your Moore home the same day you call, often within a few hours for emergency situations like a gate that won’t close or a fallen gate. Call (877) 610-2993 and you’ll get a live person and a straight answer on timing.

Do you warranty your gate repair work in Moore?

Every repair we do in Moore carries our 90-Day Done Right Promise in writing. If something isn’t right, call us and we’ll make it right. No forms, no fine print, no argument. That’s the whole point of having Hal’s name on the shop.

Gate Installation in Moore

A new driveway or pedestrian gate in Moore typically runs $1,800 to $6,500 installed, and most swing gate jobs are done in a single day once materials are on the truck. We quote the full price up front, in writing, before any work starts. If you’re on the fence about a gate that’s sagging or binding in the spring, call (877) 610-2993 and Hal will talk you through what’s actually wrong with it.

Our Gate Installation work accounts for Moore’s wind load, clay soil, and the specific hardware patterns used in post-2013 rebuild neighborhoods.

Driveway Gate Installation

Driveway gates in Moore tend to be either swing or sliding, depending on how much setback you have from the street. On tighter lots off SW 19th Street, a sliding gate keeps you from swinging a heavy leaf over the sidewalk. On wider lots with room to spare, a swing gate is simpler and cheaper to maintain. A simple single swing driveway gate runs $1,800 to $3,500 installed, while a double swing gate runs $2,800 to $5,500.

Sliding Gate Installation

Sliding gates make sense on Moore properties with short driveways or steep approaches where a swing gate would hang up. They ride on a track and rollers, which means the concrete pad under them has to be flat and the track has to be anchored into something solid. With Moore’s clay heaving and settling, we over-dig the footing and reinforce the track mounts so the gate doesn’t hop the roller in wet weather. Sliding gates run higher, typically $3,500 to $6,500, because of the track work and reinforced footing.

Pedestrian Gate Installation

A pedestrian gate is the one you walk through every day, so it’s the one that annoys you fastest when it drags. We see a lot of these next to driveways in Moore’s older ranch-house neighborhoods. The post is the thing that fails. We set new posts at 36 inches in concrete and use frame hinges that don’t strip out of the wood. Pedestrian gates are the most affordable option at $450 to $1,200 installed.

Why does my swing gate bind or fail to latch every spring in Moore even though nobody touched it?

The clay under your posts swells when it rains in spring and shrinks when the summer heat dries it out. That movement shifts the posts a fraction of an inch, which is enough to throw the latch out of alignment. It happens every spring. The fix is re-setting posts in deeper concrete below the active soil movement line, not just adjusting the latch.

My double gate was installed by a post-disaster contractor in 2014 and both leaves now sag. Can you fix it without replacing the whole frame?

Usually yes. The sag is almost always in the posts and hinges, not in the gate frame itself. We re-set the posts in deeper concrete, re-hang the frame with upgraded hinges, and square the leaves so they meet in the middle. We only replace the frame if it’s torn or cracked. Call for a free estimate and we’ll tell you exactly what your gate needs.

Gate Motor & Opener in Moore

A gate opener that’s stopped responding in Moore is usually one of four things: a dead capacitor, a stripped gear, a board fried by a surge, or a motor worn out from fighting a gate that the clay soil has pulled out of plumb. We diagnose it on site, tell you the price before we touch a tool, and usually have a Moore gate opening again the same day. If you’re near SW 34th Street or out around the newer developments, we’ve probably already worked on a gate just like yours.

Our Gate Motor & Opener service covers repair, replacement, and new installation of all major brands.

Motor Installation

A new gate motor installation in Moore runs from about $950 to $2,400 depending on whether you need a swing or slide setup, the gate’s weight, and whether we’re pulling new low-voltage wire. Homes in Moore’s 73160 zip code run the full range: small single-swing driveway gates off Ranchwood Estates take less hardware than a heavy steel slide gate on an acreage south of 19th Street. The price is quoted and agreed before any work starts. Every time.

Motor Repair

Most Moore gate motor repairs land between $180 and $520. The common failures here are surge-damaged control boards after spring thunderstorms, stripped nylon gears on swing openers, and capacitors that gave out after years of Oklahoma heat. Hal’s crew diagnoses the exact component. If the motor itself is still good, we replace what failed. We don’t swap the whole opener just because it’s easier for us. Your estimate stays your invoice.

Linear Motor Service

Linear rams and swing-arm motors are on a lot of Moore’s post-2013 rebuild homes, and we service the full Linear line. A replacement Linear arm in Moore typically runs $550 to $950 installed. Adjusting limit switches, rebuilding the gear head, or running new wire costs less. The clay soil that shifts Moore gate posts works these motors hard, so we always check post alignment before blaming the motor. Fix the panel without the post and you’ll fix it twice.

How fast can you get to a gate motor repair in Moore?

If you call before noon, we can usually be at a Moore gate by mid-afternoon, often sooner. True emergencies, like a gate stuck open with livestock or a gate that won’t close on a stormy night, get moved to the front of the line. Call (877) 610-2993 and a live person will tell you exactly when we can be there.

Is gate motor repair in Moore cheaper than Oklahoma City?

Moore pricing is the same as our pricing everywhere in the county. A typical motor repair here runs $180 to $520, and there’s no trip charge inside the county line. You won’t pay more because you live south of the metro. The only real cost difference in Moore comes from post-shift work, which is more common here because of the clay soil, and we’ll tell you before we do anything.

Gate Access Control in Moore

Gate access control in Moore means keypads, remotes, phone entry, card readers, and video intercoms that let you in without rolling down the window, and keep everyone else out. A typical keypad entry install in Moore runs $450 to $900, and a remote-control receiver retrofit on an existing operator usually lands between $250 and $500, parts and labor included. We’ve worked on gates across 73160 long enough to know which ones will fail next and why.

Our Gate Access Control work connects to full motor and opener service when you’re ready to automate a manual gate or upgrade an existing system.

Keypad Entry

Keypad entry is the most common access upgrade we do in Moore, and for good reason. A keypad on a gate off SW 19th Street or near the railroad tracks east of I-35 means you don’t hand physical keys to the lawn crew, the pool guy, or your mother-in-law, and you can delete a code in thirty seconds when the relationship changes. A standard weatherproof keypad install in Moore runs $450 to $900, depending on whether the gate already has an operator and how far the wiring needs to run.

Remote Control

Remotes on the visor still beat fumbling with a phone app in the rain, which Moore gets plenty of from March through June. We retrofit remote receivers onto existing operators of every major brand, and we program multi-button transmitters so one remote can open the driveway gate and the garage. A remote receiver retrofit on a functioning operator in Moore typically runs $250 to $500, including the receiver, two transmitters, and the labor to wire and program everything.

Smart Access

Smart access in Moore means controlling your gate from your phone, setting schedules, and getting alerts when someone opens it. It’s not for everyone, and we’ll say so. A smart controller retrofit that ties into an existing operator typically lands between $500 and $1,000, and we’ll walk you through whether your current operator has the right inputs to support it before you spend a dollar. Plenty of Moore homeowners are happy with a simple keypad and remote. We install smart access where it makes sense, not where it pads our invoice.

Why do gate operators in Moore’s 2013-rebuild neighborhoods fail earlier than in other Oklahoma City suburbs?

They fail earlier because they were installed in bulk after the 2013 EF5 tornado with shallow post footings and builder-grade hardware, often wired without dedicated conduit runs. Moore’s expansive clay shrinks and swells through wet and dry cycles, heaving posts out of plumb and binding operator arms, while voltage drop from improper power feeds burns out capacitors and boards. The same few contractors installed the same hardware across entire streets.

Can I add a keypad entry to a gate that was originally manual in Moore?

Yes, you can add a keypad entry to a manual gate, but it means adding an operator, running power, and usually reinforcing the post and leaf, because a manual gate wasn’t built for motorized torque. We do this regularly in Moore, especially in the rebuilt neighborhoods where gates went in manual and homeowners added automation years later. Expect a full manual-to-automated conversion with keypad in Moore to start around $1,200.

Gate Parts & Welding in Moore

Gate hinge replacement in Moore typically runs $85 to $210 per hinge, and most repairs we handle are done the same day we get the call. If your gate is sagging, dragging, or blown off its post after a storm, the problem is almost never the panel itself. It’s the hinge post, the hardware, or the footing underneath. The crews serving Moore carry hinge stock, latch kits, and welding rigs on the truck so the gate stays in your driveway.

Our Gate Parts & Welding work covers everything from a simple hinge swap to custom fabrication for a gate that hasn’t been made in ten years.

Hinge Replacement

Moore’s expansive clay soil is brutal on hinge posts. The ground swells after rain and shrinks during dry spells, and over a decade that movement pulls posts out of plumb. The first thing to fail is the hinge. We stock heavy-gauge replacements for Viking, Ghost Controls, DoorKing, and Elite gates, plus the stamped builder-grade sizes used in the post-2013 subdivisions east of I-35. A hinge swap runs $85 to $210 per hinge in Moore, parts included.

Post Replacement

A gate sags in the hinge post, not in the middle. When a post has rotted, cracked, or worked loose in the clay, replacing the gate panel won’t fix anything. We pull the old post, pour a deeper concrete footing reinforced for wind load, and set the new post so the gate swings true. In Moore’s tornado wind zone, a solid vinyl privacy gate acts like a sail. The footing has to be built for that. Post replacement in Moore typically runs $240 to $480, depending on post material and depth.

Custom Welding

When the original bracket doesn’t exist anymore, we make one. We weld replacement hinge plates, latch mounts, and frame reinforcements on site, matched to your gate’s original pattern. For the 2013-built Moore neighborhoods, that matters more than you’d think: the same two or three post-disaster contractors installed most of those gates, and we’ve learned their specific hardware patterns. That means we can fabricate a part that matches your gate, not just something close enough. Custom welding fabrication runs $150 to $400 for most brackets, latch mounts, and frame reinforcements.

Why do so many gates in Moore’s post-2013 rebuild neighborhoods fail at the hinge post at the same time?

Because the same two or three post-disaster contractors installed thousands of gates across those subdivisions using identical hardware, and the expansive clay under Moore has been shifting those hinge posts out of plumb for ten to twelve years now. The result is a wave of hinge post failures hitting entire blocks on the same timeline. Call (877) 610-2993 and we’ll tell you over the phone whether your gate matches the pattern.

Will welding my gate panel fix a sag if the hinge post is leaning in Moore clay soil?

No. Welding the panel repairs the panel, but a sag almost always starts at the hinge post, not in the middle of the gate. Fix the panel without the post and you’ll fix it twice. We’ll pull the post, check what the clay has done to it, and set a new footing that’s deep enough for Moore’s shrink-swell cycle before we weld anything. That’s the only repair that holds.

Brands We Service in Moore

We carry parts and training for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Moore homeowners, that means we don’t order parts from Dallas and make you wait three days. We stock common boards, gears, and arms locally, and we can usually get a Viking or Linear gate running again on the first visit. See all brands we service.

Pricing for Gate Repair in Moore, OK

Neighborhoods We Serve in Moore

We regularly work throughout Moore, including the 73160 zip code, and answer calls from every corner of town. Typical response time across Moore is same day for urgent repairs, next morning at the latest. If a gate is stuck open and a dog is loose, call and tell us that specifically. We’ll move it up the list.

• The Vineyards
• Oak Creek
• Regency Park
• Arbor Hills
• Southgate

Service Area - Cities Near Moore

We dispatch and coordinate scheduling from our Oklahoma City office, and our crews serve Moore locally every day. We also work in Del City, Norman, Midwest City, Newcastle, and Oklahoma City. Same pricing, same promise, same live person answering the phone.

FAQs About Gate Repair in Moore