Gate Repair in Lexington - Same-Day Repair, Priced Before We Start

Gate Repair in Lexington, MA

Gate repair in Lexington typically costs $250 to $2,800 depending on what’s broken, and most repairs are quoted and finished the same day we arrive. We’re Gatewood Fence & Gate, owner-operated since 2001, and we answer the phone live at (877) 610-2993 any hour you call. Lexington’s mix of historic ironwork near the Battle Green and mid-century estate gates on Marrett Road means no two jobs are the same, but the root cause is usually the same thing: a hinge post that’s moved or hardware that’s corroded past its limit.

Call (877) 610-2993

Why Lexington Homes Are Different

Lexington’s housing stock splits into two eras that create two very different gate problems. Near the historic center, 18th- and 19th-century Federal and colonial homes carry ornamental iron gates that preservation-minded owners want repaired, not replaced. The Historic District Commission governing properties near the Battle Green requires a Certificate of Appropriateness before any visible alteration, a permitting layer virtually no neighboring town imposes. Farther out, along Marrett Road and Massachusetts Avenue, the mid-century ranches and split-levels built in the 1960s through 1980s came with tubular-aluminum driveway gates now forty to sixty years old. Their hinge posts and footing hardware are decades past intended service life.

Then there’s the weather. Massachusetts building code requires post footings 48 inches deep to get below the frost line. Gate posts set shallower than that heave out of plumb over a Lexington winter. By spring thaw, the latch won’t line up, the gate drags, and an automated opener binds against a post that shifted just enough to throw everything off. Road salt from town arterials like Bedford Street and Waltham Street accelerates corrosion in steel hinges, strike plates, and motor housing seals. A gate contractor who doesn’t account for both the freeze-thaw cycle and the salt spray ends up fixing the same gate twice.

Gate Repair in Lexington

Gate repair in Lexington means dealing with two very different animals: 200-year-old ironwork near the Battle Green and 1970s estate gates on Marrett Road, each with its own failure points. The common thread is that Lexington’s winters push gate posts out of plumb and road salt eats hinge steel faster than most homeowners expect. We diagnose on site, quote a price before we touch anything, and do the work in your driveway so the gate never leaves the property.

Electric Gate Repair

When a gate opener hums but won’t move, or moves six inches and stops, Lexington homeowners are usually looking at a control board, capacitor, or limit switch failure. On older units installed in the 1980s and 1990s, motor brushes and drive gears are just plain worn out. Electric gate opener repair in Lexington typically runs $250 to $600 depending on whether it’s a capacitor swap or a full board replacement. We stock common parts for Viking, Ghost Controls, DoorKing, and Elite systems in the trucks that cover 02420 and 02421, so we often finish the job the same visit.

Hinge and Post Repair

This is the bread-and-butter of gate repair in Lexington. A gate sags in the hinge post, not in the middle, and that’s where we start. Posts set shallower than the 48-inch frost depth heave out of plumb every winter. We excavate to code depth, set new pressure-treated footings, and weld reforged steel hinges onto the original post so the visible profile stays unchanged. A hinge-and-post realignment on a standard driveway gate typically runs $380 to $750, including excavation to code depth and new footings. On Historic District properties, keeping the visible profile unchanged matters a lot, and we know the trigger points that could trigger a Commission review.

Weld and Rust Repair

Road salt from Bedford Street and Waltham Street drifts onto estate gates and accelerates corrosion in steel hinge pins, strike plates, and motor housing seals. We cut out rusted sections, weld in new steel, and refinish so the repair holds up to another Lexington winter. Weld and rust repair on ornamental iron gates runs $150 to $450 for hinge re-forging and section patching. For gates where the original ironwork is heavier and better made than anything available today, this repair preserves what you’d pay a premium to replicate. Gate Repair is what we built this shop on, and we still do it the same way Hal started in 2001.

Does my Lexington property need Historic District Commission approval before I repair my driveway gate?

If your property sits near the Battle Green or Lexington Center and falls within the Historic District Commission’s jurisdiction, any repair that changes the gate’s visible profile requires a Certificate of Appropriateness first. Simple functional repairs you can’t see from the street, like fixing an opener motor or replacing buried hinge internals, generally pass without review. We check the Historic District map before we start work so you don’t get surprised by a violation notice.

Why did my automatic gate opener burn out after its first winter in Lexington?

Road salt and freeze-thaw cycles kill gate openers in Lexington faster than almost any other factor. Salt spray gets into the motor housing or wiring connections, moisture freezes and expands, and internal components corrode. A poorly sealed installation, common on older estate gates, will burn out a new opener within one or two winters. We install upgraded seals and route wiring with the local weather in mind. Call (877) 610-2993 for a free estimate.

Gate Installation in Lexington

A new driveway gate in Lexington typically runs $2,800 to $9,500 installed, depending on material, automation, and whether we’re setting new posts or working with existing footings that pass inspection. Most standard single-swing gate installations on a level Lexington lot take one full day, with concrete cure and opener programming wrapped into that same visit whenever possible. If you’re calling from Meriam Hill, Follen Heights, or out toward the Winchester line, we know where you are before you finish the address.

Driveway Gate Installation

Automated driveway gates are common on Lexington’s mid-century estate lots, especially along routes where homes sit well back from the road. We install swing and slide configurations sized to your driveway width, with opener programming matched to your access needs. On lots where the original 1960s-1980s tubular-aluminum gate is still standing, we’ll evaluate the post condition before recommending anything new. A single swing driveway gate, manual, starts around $2,800 and goes to $5,500. Adding automation brings the range up to $4,500-$7,500. The price is quoted and agreed before any work starts, and you’ll never see a different number on the invoice.

Sliding Gate Installation

Sliding gates make sense on Lexington driveways with a slope that would fight a swing gate, or where a swing arc would intrude on a sidewalk or stone wall. These are common on the wider lots along Waltham Street and out by Whipple Hill. We set the track, level the gate, and program the opener with safety edges and force limits adjusted to the actual travel of your gate, not the factory default. Sliding gate installations run $4,000 to $8,000, with the higher end covering longer track and higher-cycle hardware.

Pedestrian Gate Installation

Pedestrian gates serve a different purpose than driveway gates, especially in Lexington’s older neighborhoods. They get more use, more exposure to road salt kicked up from Bedford Street and Massachusetts Avenue, and more abuse from weather and people. We install pedestrian gates in matching iron or steel profiles, with hardware sized to survive New England cycles of freeze, thaw, and salt. A pedestrian gate installation runs $1,800 to $4,200. We can also pair a new pedestrian gate with your existing driveway gate so the profiles match. Gate Installation quotes include a free measure and a written price before we order a single part.

Is gate installation in Lexington more expensive than nearby towns?

Costs in Lexington run close to what you’d pay in Arlington or Winchester, though Historic District properties near Lexington Center can add a Certificate of Appropriateness step that costs time, not typically money. The bigger driver of price is post condition and whether we’re reusing footings or digging new ones to the 48-inch frost depth. Our pricing is upfront and agreed before work starts. Call (877) 610-2993 for an exact quote on your specific gate.

What warranty do you offer on gate installation in Lexington?

Every installation carries our 90-Day Done Right Promise in writing. If something isn’t right with the install, the post, the hinges, or the opener programming, one call brings Hal back. We don’t hedge it with “up to” or “in most cases.” You get the name on the shop, and the shop is down the road.

Gate Motor & Opener in Lexington

When a gate motor quits in Lexington, you’ve got a driveway that won’t open, a car that can’t get out, and a home that suddenly lost a layer of security. Gate motor repair in Lexington typically runs $185 to $425 for most common failures, and we can usually have the problem diagnosed and fixed the same day we arrive. That’s what we do every week for homeowners along Marrett Road, Massachusetts Avenue, and throughout 02420 and 02421.

Motor Repair

Most Lexington motor failures come down to four culprits: a worn capacitor, corroded limit switches, a failed control board, or a transformer that gave up after years of New England temperature swings. We diagnose on site and repair what’s broken rather than selling you a whole new operator. A typical motor repair in Lexington runs $185 to $425, and because we stock common parts locally, we often finish the job the same visit. Show us the gate failing to close on its own, and we’ll show you where it’s failing.

Motor Installation

A new gate motor in Lexington runs $1,100 to $3,200 installed, depending on the motor class, gate weight, and whether the existing post and hardware can be reused. For the large-lot estates near Marrett Road and the colonial-revival homes throughout 02421, we usually recommend a heavier-duty motor with a battery backup, because a dead gate during a winter outage means a car trapped behind it. Every installation includes a free measure, a written price, and our 90-Day Done Right Promise in writing before we order a single part.

Slide Motor Replacement

Slide gates hang heavy, and the motor that drives them works against years of grit, ice, and rust. On Lexington properties with long, paved drives along Bedford Street or Waltham Street, the slide motor takes a beating from road salt spray each winter. We repair and replace slide motors, inspect and adjust the rack and pinion alignment, and check the v-wheels and track for the binding that’s been silently overloading your motor for months. A slide motor replacement in Lexington runs $1,300 to $2,900 depending on gate weight and length. Gate Motor & Opener service is what we do every day, and we don’t hand you off to a subcontractor.

How fast can you get to Lexington for a gate motor repair?

We typically reach homes in Lexington within 90 minutes on emergency calls, and same-day appointments are usually available for motor repair. Schedule a non-emergency visit and we’ll give you a firm window before the day of the job. Call (877) 610-2993 and a live person will tell you exactly when we can be there.

Does your work come with a warranty in Lexington?

Every gate motor repair and installation in Lexington carries our 90-Day Done Right Promise, stamped in writing on every job. If it’s not done right, we make it right, with one call, no runaround. Call (877) 610-2993 for a free estimate.

Gate Access Control in Lexington

Most keypad, intercom, and card reader systems in Lexington can be replaced or added at your existing gate for $500 to $2,800 installed, and we usually get a truck out within 48 hours for scheduled work. We’re not a call center that skims the job off to whoever is nearby. Hal’s name is on the shop, we answer the phone live at all hours, and the person who quotes the job is the person who shows up.

Keypad Entry

Most keypads in Lexington get mounted on a metal gooseneck or a brick pier, and they die slowly: first a hard-to-press button, then a code that works when it wants to. We stock rough-weather keypads that hold up to road-salt spray off Bedford Street and Waltham Street, and we wire them so they don’t look like an afterthought bolted to a Federal-era gate. A straightforward keypad replacement in Lexington runs roughly $500 to $900 installed. Programming a fresh code takes about ten minutes once the unit is in place.

Phone Entry

Phone-entry systems are the practical middle ground for Lexington homes where you’d rather not hand out a code to every landscaper and dog walker. The visitor scrolls to your name on a small screen, presses call, and the box rings your cell. We install and service cellular-capable units that don’t rely on your landline or a fragile VoIP adapter, which matters because so many Lexington homes long ago dropped the copper phone line the old system was wired to. A new phone-entry system with a cellular bridge typically lands between $1,200 and $2,800, depending on whether we’re reusing your existing enclosure or mounting a new one on brick.

Card Reader Systems

For folks with regular contractors, estate staff on Mass Ave, or a home office with scheduled visitors, we install proximity card readers tied to the same opener. Each person gets a card, the system logs when they arrive and leave, and a lost card is deactivated in less than a minute without touching the others. On Lexington’s larger estate-style lots, that makes more sense than a keypad code that ends up written on a paint can in the garage. Proximity card readers run $800 to $1,500 for the first reader and controller, with each additional reader usually $350 to $600. Gate Access Control quotes include checking the physical gate, not just the board, because a post heave from shallow footings often gets blamed on the electronics.

Does gate access control cost more in Lexington than in nearby towns?

Our pricing does not change based on what town you live in. A keypad replacement in Lexington costs the same as that same keypad job in Bedford or Winchester. What does change is the permitting wrinkle: on parcels in the Historic District, there may be a Certificate of Appropriateness step that adds a little time and a filing fee. We’ll tell you upfront if your property is regulated.

What if my access control system stops working during a Lexington winter?

First call us at (877) 610-2993. Many winter failures are power-related, from a GFCI outlet that tripped in a February thaw to an opener that bound up after a post heaved. Our emergency service handles exactly that, and since a live person answers the phone, you’ll know right away when we can get someone to you. The 90-Day Done Right Promise applies to every job we do.

Gate Parts & Welding in Lexington

A broken gate hinge or snapped weld in Lexington means a driveway that won’t close, a dog that gets out, and a property that’s suddenly wide open. Most calls we get from Lexington homeowners involve exactly this: hardware that gave out after years of New England weather, or a gate that never latched right after somebody else’s patch job. Hal Gatewood and his crew handle gate parts and welding on site, with the gate staying in your driveway where it belongs.

Hinge Replacement

Lexington winters are hard on gate hinges. Road salt from Bedford Street and Waltham Street works its way into the pin and barrel, and by spring the gate creaks, binds, or drops half an inch so the latch misses the strike. We replace hinges with properly sized cast or welded steel, set for the gate’s weight and swing, and we align the gate so it closes true. A hinge replacement in Lexington typically runs $95 to $260 per hinge, depending on the gate’s weight and whether the post needs adjustment.

Post Replacement

A gate sags in the hinge post, not in the middle. Massachusetts building code requires a 48-inch frost depth for gate posts, and anything set shallower than that heaves out of plumb over a Lexington winter. We dig out the old post, set the new one below frost line, and reattach the gate so it swings clean. Post replacement with a properly set footing typically runs $600 to $1,400 in Lexington depending on post size, gate weight, and whether concrete demolition is involved.

Rail Repair and Custom Welding

The horizontal rails on wrought iron and tubular aluminum gates take the most stress. When a rail cracks or a weld fails, the gate starts to twist and the pickets loosen. We cut out the damaged section, weld in new material, and grind it smooth so the repair is nearly invisible. Rail repair usually runs $180 to $450 for a typical Lexington driveway gate. Sometimes the part you need doesn’t exist anymore. Older colonial-revival estates have hardware that isn’t manufactured today. We fabricate replacement brackets, latch plates, and gate leaves on site, welded to match the original profile. Custom fabrication starts around $250 and depends on complexity and material. We’ll quote it firm before we strike an arc. Gate Parts & Welding is repair-first work, and we don’t talk replacement until we’ve exhausted every option to fix what you have.

Can you repair a sagging gate without replacing the whole panel?

In nearly every case, yes. A sagging gate is almost always a hinge post problem, not a panel problem. We reset or re-foot the post to the required 48-inch depth, re-forge the hinge connections, and realign the gate so it swings level. Replacing the panel without fixing the post means you’ll be doing the whole job again in two years. We’d rather fix it once. Call (877) 610-2993 and we’ll come take a look.

What warranty do you offer on gate welding in Lexington?

Every job, welding included, carries the 90-Day Done Right Promise in writing. If the repair fails because of our workmanship within 90 days, we come back and make it right at no charge. No “up to,” no “in most cases.” One call brings Hal back. Call (877) 610-2993 to schedule a free estimate.

Brands We Service in Lexington

We stock parts and carry factory-level service certification for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common failures on Viking, Ghost Controls, DoorKing, and Elite systems can be repaired same-day because the parts travel in our trucks, not on a warehouse shelf three days away. our brands

Pricing for Gate Repair in Lexington, MA

Neighborhoods We Serve in Lexington

We work across all of Lexington, from the colonial-era streets around Lexington Center and the Battle Green to the larger lots off Bedford Street, Waltham Street, and Marrett Road. Typical response time for the Lexington area is same-day or next-morning for repair calls.

• Lexington Center and the Battle Green area
• Four Corners
• Hastings Heights
• Marrett Road corridor
• East Lexington along Massachusetts Avenue

Service Area - Cities Near Lexington

We cover Lexington fully, including both 02420 and 02421, and we work the surrounding towns without adding a trip charge inside the county. If you’re near Arlington, MA, Bedford, MA, Winchester, MA, Burlington, MA, or Belmont, MA, you’re in our regular service radius. Dispatch and scheduling are coordinated from our Boston office, and crews serve Lexington, MA locally.

FAQs About Gate Repair in Lexington