Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lebanon, PA
Gate repair in Lebanon typically runs $185 to $650 for most hinge, post, and operator fixes, and we can usually have someone at your driveway the same day you call. When a gate won’t open or drags against the frame, call (877) 610-2993 and you’ll get a live person, not a recording.
Why Lebanon Homes Are Different
Lebanon sits on Warren County’s clay-heavy soils, and that clay swells and shrinks with every freeze-thaw cycle. The city averages around 20 freeze-thaw events each winter, which is exactly why February and March bring a wave of gates that suddenly won’t latch. A post that was perfectly plumb in September has heaved a quarter inch by Valentine’s Day, and that quarter inch at the post means the gate drags three inches at the driveway end. Anyone who has lived in Lebanon long enough has seen it, and frankly, so have we. Fix the post, then re-hang the gate, and it stays fixed.
Lebanon has a genuine split housing stock. The dense core is full of Federal, Greek Revival, and Victorian homes from the 1820s to the 1890s, many with decorative iron or wood gates that predate electrical openers entirely. Meanwhile, a full ring of 1990s to 2010s subdivisions around the edges came with builder-grade aluminum gates now hitting their first major hardware failures. We work across both worlds in the same service day, and the fix is never the same twice.
Lebanon’s active Historic District creates a repair-first, match-the-original dynamic that distinguishes this city from fast-growing Warren County neighbors like Mason or Springboro. Downtown property owners on or near the National Register-listed historic district often discover mid-repair that Lebanon’s Historic Preservation Commission considers a gate “a character-defining feature.” A like-for-like repair moves forward smoothly, but swapping an ornamental iron gate for a modern aluminum panel can stall without approval. We’ve navigated this with the Board enough times to know what triggers review and what doesn’t.
Gate Repair in Lebanon
Gate repair in Lebanon, PA typically runs $185 to $650 for most hinge, post, and operator fixes, and we can usually have someone at your driveway the same day you call. When a gate won’t open or drags against the frame, call (877) 610-2993 and you’ll get a live person, not a recording.
Hinge & Post Repair
Around Lebanon, the hinge post is where most gate failures start. Warren County clay expands and contracts with the seasons, and Lebanon averages about 20 freeze-thaw cycles each winter. That heaves posts out of plumb, the gate sags at the latch side, and no amount of hinge-tightening fixes it. We excavate the footing, reset the post with proper concrete depth, and rehang the gate so it clears the frame like it should. A hinge post reset and realignment in Lebanon runs $450 to $850, depending on whether we’re excavating a concrete footing or working with a brick pier. This is the single most common call we take in late winter and early spring.
Weld & Rust Repair
Downtown on Broadway and the surrounding 19th-century streets, a lot of gates are ornamental iron with hand-forged details. When a hinge pin snaps or a weld cracks, you can’t just bolt on a generic part from a big-box kit without altering the gate’s character. We weld on site, in your driveway, so the gate never leaves your property. The repair matches the original profile. Weld and rust repair on ornamental iron runs $185 to $400 per section and includes on-site grinding and paint prep. Fix the panel without the post and you’ll fix it twice, but fix the weld properly and that gate stays true for decades.
Electric Gate Repair
Electric gate repair in Lebanon covers the operator, the control board, the safety edges, and the wiring between them. A lot of builders in the county’s 1990s and 2000s subdivisions installed builder-grade operators and then undersized the low-voltage conduit run, or skipped it entirely. When that wire fails, the gate is dead until someone trenches a new line. We diagnose the actual fault first, then quote the repair in writing before any work starts. Electric gate repair starts around $200 for a sensor or keypad replacement and runs $400 to $1,200 for a full operator swap including the control board. Learn more about our full Gate Repair capabilities.
Why does my automatic gate stop working after winter in Lebanon?
Almost always, it’s the freeze-thaw cycle on your hinge post. The post heaves, the gate binds, and the operator overloads and shuts down. Sometimes it’s also the low-voltage wire failing where an undersized conduit let water in. We diagnose the real cause before recommending a fix, and we don’t replace an operator that just needs a post reset. Call (877) 610-2993 and describe the symptoms.
My swing gate sags even after I tightened the hinges. What’s actually wrong?
The hinge post is moving underground. Tightening hinges on a gate whose post has heaved or settled does nothing except strip the threads. A gate sags in the hinge post, not in the middle, and that’s where we start. In Lebanon’s clay soil, the fix is excavating and resetting the post deeper with new concrete. Call (877) 610-2993 for an on-site assessment.
Gate Installation in Lebanon
Gate installation in Lebanon typically runs $1,800 to $7,500 depending on the gate style, operator, and what’s already in the ground. Most jobs take one to two days once materials are on site, and we quote a firm price before any work starts. If you’re on Broadway, a side street off Main, or out in the 1990s subdivisions near Miller Road, we know what your gate is up against.
Driveway Gate Installation
Driveway gates are the workhorse of Lebanon properties, especially the bigger lots east of town and the HOA communities that went up in the 1990s and 2000s. A new driveway gate in Lebanon runs $2,500 to $7,500 installed, depending on width, material, and whether you’re adding an opener. We set posts below the frost line, pour proper footings, and hang the gate so it swings free even after the clay shifts. If you’ve got an old aluminum kit that’s failed at the rack and pinion, we’ll look at it honestly.
Pedestrian Gate Installation
Small gates outlive their hardware. That’s the story we see on older Lebanon homes, where a wrought-iron pedestrian gate from the 1880s may be on its fourth set of hinges. New pedestrian gate installation in Lebanon typically runs $800 to $2,200 for a standard ornamental or aluminum gate. If you’re in the Historic District, the gate itself may be protected. We can usually remount the original, match the historic profile, and add a modern latch or closer without triggering a review. That’s the smarter play for a property with character.
Swing Gate Installation
Swing gates are the classic Lebanon choice, and for good reason. They’re quiet, simple, and fit the character of older homes. New swing gate installation in Lebanon starts around $1,800 for a single ornamental gate and runs up to $5,500 for a double swing with a LiftMaster or Viking opener. But the hinge post is everything. Clay soil heaves, the post moves a half inch, and suddenly the gate drags on the latch side. We oversize the post, set it in concrete below frost depth, and weld on beefed-up hinge plates. See our complete Gate Installation options.
Can I replace my ornamental iron gate with a modern aluminum panel in Lebanon’s Historic District?
Not without checking first. Inside Lebanon’s Historic District, the Historic Preservation Commission considers a gate a character-defining feature. The gate on your property may be protected, and swapping an original iron gate for a modern aluminum panel can stall without approval. A like-for-like repair is usually straightforward. A full replacement with a different profile is not. We can tell you what’s likely to trigger a review and whether a restoration approach makes more sense.
Why does my gate start dragging every March in Lebanon?
It’s the clay. Lebanon sits on Warren County clay that absorbs water and freezes in winter, and with around 20 freeze-thaw cycles a year, hinge posts heave upward and sideways. By March, the gate is out of plumb and dragging on the frame. The fix is resetting the post below frost depth with a wider footing. The gate itself usually isn’t the problem. The post is. We set it right the first time.
Gate Motor & Opener in Lebanon
When a gate motor dies in Lebanon, you need someone who understands what they’re walking into, not a technician reading a manual in your driveway. Gate motor and opener service in Lebanon runs $225 to $640 for most repairs, and we’re usually on site the same day you call. Our shop handles everything from dead control boards on 1990s LiftMaster operators to full motor retrofits on hand-forged iron gates in the Historic District.
Motor Repair
Most Lebanon gate motor failures come down to three things: a burnt capacitor, a seized bearing, or a control board that’s past its service life. We open the operator on site, diagnose it in front of you, and quote the repair before we touch a tool. Basic motor repair, like a capacitor, limit switch, or photocell replacement, runs $225 to $400. If the motor’s worth saving, we save it. If a $600 operator swap is genuinely cheaper than a $450 patch job, we’ll tell you that too.
Motor Installation
New operator installation in Lebanon runs $650 to $1,400 depending on gate weight, operator type, and whether we’re replacing an existing motor or running new power. We install swing, slide, and linear operators, set travel limits, wire safety photocells and edges, and make sure the gate moves like it should before we leave. Older Lebanon gates often need a post correction at the same time, because the clay soil has moved things over the years.
Slide Motor
Slide gates on Lebanon properties take a beating from freeze-thaw cycles. The track fills with ice and grit, the wheels wear flat, and the motor strains until something fails. We repair and replace slide motors, clean and realign track, and set the torque limits so the opener isn’t fighting itself. Slide motor repair in Lebanon typically runs $250 to $600. Slide motor replacement with new track work can reach $1,200. Explore our Gate Motor & Opener services.
My 1990s Lebanon HOA gate uses an old LiftMaster operator with a dead control board. Can you retrofit a modern board?
In most cases we can retrofit a modern universal control board into a 1990s LiftMaster operator for $350 to $500 parts and labor. The exception is when the old board’s failure means the motor itself was already on borrowed time, or when the board’s obsolete relays have damaged the transformer. Hal will test the motor before recommending a board retrofit, so you don’t spend $450 patching something that needed a $900 replacement.
Every late winter my Lebanon driveway gate starts dragging and the opener trips the safety photocell. Is the motor failing?
Usually not. In Lebanon, late-winter gate dragging is almost always a post that heaved out of plumb during a freeze-thaw cycle. The clay soil under the post swells and shifts, the gate drags on the frame, and the photocell misaligns, which the operator reads as an obstruction. The motor is often fine. We reset the post, true the gate, and the operator stops tripping. If the motor has been straining, we’ll tell you.
Gate Access Control in Lebanon
If you live in Lebanon and your gate keypad stopped working, your opener ignores the remote after a rainstorm, or you want to add a video intercom to an older ornamental gate, here’s the short answer: Gatewood Fence & Gate handles keypads, remotes, phone entry, card readers, video intercoms, and full smart access setups in Lebanon, PA. We quote the price before any work starts, and we stand behind every job with our 90-Day Done Right Promise in writing.
Keypad Entry
A keypad on your gate means you don’t hand out remotes anymore. You hand out a code, and you delete it when the landscaper changes or the tenant moves out. In Lebanon’s Historic District, we mount keypads without altering the gate’s visible profile. We color-match the housing to your iron gate’s patina, run the wire along the back side of the post, and program the code right there. Most keypad installations in Lebanon run $280 to $540, depending on whether there’s existing conduit or we’re pulling new wire.
Remote Control
Remotes are the first thing to fail on any gate, and Lebanon’s freeze-thaw cycle speeds that along. Batteries die, the circuit board cracks from temperature swings, or the receiver stops talking to the opener. We replace, reprogram, and match remotes from Viking, Ghost Controls, DoorKing, Elite, and five other major brands. If your gate opens fine from the keypad but ignores the remote, that’s usually a receiver board, not a remote problem. We test before we sell you anything. Remote replacement and programming in Lebanon typically runs $150 to $280.
Phone Entry
Phone entry lets you buzz open the gate from your cell, or it can ring the house so you can talk to the person at the gate before you let them in. That’s a real security upgrade for Lebanon homes that sit back from the road. We install phone entry modules that tie into your existing landline or work over cellular, so there’s no new phone line to run. Expect $450 to $850 for a full phone entry setup in Lebanon, depending on whether we’re adding it to a working opener or starting from scratch. View our Gate Access Control systems.
Can I add a keypad or video intercom to a historic wrought-iron gate in Lebanon’s Historic District without a permit?
In most cases, yes. Lebanon’s Historic Preservation Commission considers a gate a character-defining feature, which means you can’t swap the gate itself or alter its visible profile without review. But mounting a keypad or intercom on the back side of the post, running conduit along the rear, and color-matching the housing to the gate’s patina is treated as a like-for-like repair in most situations. We’ve done this work on Broadway properties without issue.
Why does my gate operator in my Lebanon subdivision keep faulting after heavy rain or snow?
Two things are happening in Lebanon and they happen together. First, the clay-heavy soil under Warren County holds water, so the ground around your gate posts stays saturated long after the rain stops. Second, the freeze-thaw cycles shift the gate posts a little every year. The result is a gate that sits slightly off-plumb and drags, which makes the operator work harder and fault. On slide gates, the loop detector can also read ground moisture as a vehicle. We check both.
Gate Parts & Welding in Lebanon
Gate parts and welding in Lebanon usually break down to one question: can this be repaired on site, or does it have to be hauled away? In most cases, we repair it right in your driveway. Hal Gatewood has been doing exactly that since 2001, and a live person answers our phone 24/7 at (877) 610-2993. If you’re near Broadway, along Route 42, or in one of the older side streets off Main, we know the gates you’re dealing with.
Hinge Replacement
Hinges fail before gates do. The pivot point takes every ounce of weight and every freeze-thaw shift. On Lebanon’s older Broadway-era homes, we regularly see original wrought-iron hinges that have wallowed out at the pin or cracked at the barrel. A gate sags in the hinge post, not in the middle, and that’s where we start. We replace the hinge, re-shim the leaf, and true the gate to the post. In most Lebanon cases, hinge replacement runs $180 to $340 per hinge set, depending on the weight of the gate and the condition of the post.
Post Replacement
Clay-heavy soil under Lebanon expands and contracts with every hard freeze. After about 20 freeze-thaw cycles in a typical Warren County winter, a gate post can heave half an inch out of plumb. That’s enough to drag the latch side against the frame or throw the hinge alignment off so the gate won’t close without a shove. We break out the old footing, set the new post below frost depth, and weld the gate back to it. Post replacement in Lebanon typically runs $450 to $900 for a standard residential swing gate.
Custom Welding
Some repairs aren’t a part replacement at all. A broken decorative finial, a stress crack near the picket welds, a mangled latch tab: that’s welding work. Hal welds on site, with the gate still hung, whenever possible. We don’t haul your gate to a shop unless the repair genuinely can’t be done in the driveway. A custom welding job on a Lebanon residential gate typically runs $160 to $385, depending on the length and position of the weld. We’ll quote it in writing before any spark is lit. See what Gate Parts & Welding covers.
Can I replace my historic iron gate with an aluminum panel on any Lebanon street?
Probably not inside the Historic District without review, because in Lebanon’s preservation overlay a gate is treated as a character-defining feature. Like-for-like repair of the existing ornamental iron gate usually moves forward without a commission review, but swapping it for a modern aluminum panel can require Historic Preservation Commission approval first. Outside the Historic District, in the newer HOA subdivisions around the edge of the city, there’s no preservation review, and you have more options.
How do you work on a shared driveway gate without blocking the neighbor?
We stage the work to keep one side of the driveway open. If the gate is a swing gate, we secure the failed leaf and keep the operable leaf functioning while we work. If it’s a sliding gate on a shared right of way, we repair on site without removing the entire run, so vehicle access stays open for both properties. On a narrow Broadway side yard, our crew once replaced a post while both neighbors came and went.
Brands We Service in Lebanon
We carry parts and stock common boards for FAAC, BFT, Linear, and Viking operators, plus five other major brands. Most repairs in Lebanon don’t wait on a distributor shipment. If we don’t have it on the truck, our Philadelphia office can usually have it next day. See our brands for the full list.
Pricing for Gate Repair in Lebanon, PA
| Service | Typical range in Lebanon |
|---|---|
| Hinge post reset and realignment | $450 - $850 |
| Weld and rust repair (per section) | $185 - $400 |
| Electric gate repair (sensor/keypad) | $200 |
| Full operator swap with control board | $400 - $1,200 |
| Single swing gate installation | $1,800 - $3,500 |
| Double swing with operator | $4,000 - $6,500 |
| Pedestrian gate installation | $800 - $2,200 |
| Driveway gate installation | $2,500 - $7,500 |
| Basic motor repair (capacitor, switch, photocell) | $225 - $400 |
| Control board retrofit or replacement | $350 - $750 |
| Keypad entry installation | $280 - $540 |
| Remote replacement and programming | $150 - $280 |
What pushes price up in Lebanon: deeper excavation in clay-heavy soil, matching historic profiles for Historic District properties, and trenching new conduit where builders skipped it. The price we quote is the price you pay. No trip charge inside the county, no surprise line items, and we agree on the number before any work starts.
Neighborhoods We Serve in Lebanon
We work across Lebanon’s zip code 45036, from the dense historic blocks off Broadway to the newer subdivisions off Wilbur Avenue. Most calls inside Lebanon can be scheduled within 24 hours.
- Historic District - period iron gates and preservation-sensitive repairs
- Liberty Heights - mid-century properties with chain-link and ornamental gates
- Downtown Lebanon - commercial and residential gates near Broadway and Main Street
- Northeast Lebanon - 1990s and 2000s subdivisions with aluminum driveway gates
- Village of Lebanon - older residential streets with wood and iron mixes
Service Area - Cities Near Lebanon
We run regular routes through Warren County and the surrounding area. If you’re near Lebanon, PA, Lititz, PA, Ephrata, PA, Middletown, PA, Leola, PA, or Lancaster, PA, we’re in your area. Dispatch and scheduling are coordinated from our Philadelphia office, but the crew that shows up at your gate knows these roads.
Serving Lebanon, PA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lebanon and the communities around it; dispatch is coordinated from our Philadelphia office. The map shows the Lebanon coverage area; if your address is on it, we can help.
Also serving nearby: Lebanon, PA, Lititz, PA, Ephrata, PA, Middletown, PA, Leola, PA, Lancaster, PA.
FAQs About Gate Repair in Lebanon
Most Lebanon calls are scheduled same day or next day, depending on when you call and where the crew is routing. Emergency calls for gates stuck open or vehicles trapped inside get priority. Call (877) 610-2993 and a live person will tell you exactly where we are and when we’ll be there.
For standard repairs inside Lebanon city limits, no permit is typically required. If your property is in the Historic District and the work changes the gate’s material or visible design, the Historic Preservation Commission may need to review it. We document our repairs with photos and specs, which helps if questions arise later.
Yes. We repair and maintain shared driveway gates and subdivision entrance gates throughout Lebanon’s HOA communities. We coordinate access with the property manager, stage work to keep traffic moving, and provide written documentation for the HOA’s records. One call brings us back if anything needs adjustment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lebanon Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond