Gate Repair in Westwood - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Westwood

Gate repair in Westwood, MA typically runs $195-$650 depending on whether we’re fixing a shifted hinge post, a corroded swing arm, or an underground operator that’s lost its mind after a freeze-thaw cycle. Most jobs on this side of Norfolk County get done the same day we look at them, because we stock common parts locally and Hal doesn’t like making people wait. If your gate is sagging off Dover Road, sticking near University Station, or refusing to close on a wooded lot off Canton Street, call (877) 610-2993 and a live person picks up, day or night. We’ve been fixing gates in Westwood long enough to know exactly what the frost does to them by March.

Call (877) 610-2993

Why Gatewood Fence & Gate Is Westwood’s Preferred Gate Repair Company

The name on the shop is Hal Gatewood’s, and he’s been at this since 2001. That matters in a town like Westwood, where homeowners are used to being quoted one number on the phone and handed a different invoice at the door. We quote a price before we touch anything, write it down, and stick to it. The Gate Repair work we do across Norfolk County is the same work Hal does himself, with the same 90-Day Done Right Promise stamped on every job: if it’s not done right, one call brings him back. No runaround, no fine print.

Westwood customers call us back because the person who shows up is the person whose reputation is on the invoice. The shop address is published. The license number is published. You can drive over and look Hal in the eye if you want. That’s the oldest accountability there is, and most national outfits can’t offer it because they’re not from here.

Calls are answered by a live person 24 hours a day, seven days a week. Not a voicemail. Not a chatbot. When a gate stops closing at 11pm and the driveway is wide open to the street, you talk to a human who knows what a Viking operator sounds like when its limit switch is out of adjustment.

Our Gate Repair Services in Westwood

Electric Gate Repair

Westwood’s long private driveways mean a lot of electric gate operators, and those operators work hard through New England winters. We repair swing arm motors, underground operators, control boards, photo eyes, keypads, and safety edges. Salt spray is brutal on the arms and housings, so we look for corrosion at the connection points before we assume a board is fried. A lot of “dead” operators we see in Westwood just have a corroded terminal block or a limit switch that got knocked out by frost heave. We fix what’s actually broken, not what’s easiest to replace.

Automatic Gate Repair

Automatic gates in Westwood have a specific failure pattern: the frost line here runs about 48 inches deep, and any post or pillar footing that wasn’t dug below that line shifts every winter. The gate itself doesn’t break. The foundation under it moves. That throws tracks, hinges, and limit switches out of alignment, and the operator burns itself out trying to push against the new angle. We diagnose the footing problem first. Swap parts without fixing the post and you’ll fix it twice.

Hinge & Post Repair

This is where we do a lot of welding on site, because Westwood’s ornamental iron gates don’t come off their hinges easily and they shouldn’t have to. When a hinge post shifts an inch from frost heave, we reset it on a deeper footing, weld the hinge in true, and hang the gate so it swings clean. A gate sags in the hinge post, not in the middle, and that is where we start. We’ve fixed custom iron gates off Dover Road, Clapboardtree Street, and Gay Street that other companies wanted to haul away and replace. We fix them in your driveway.

Gate Realignment

When a heavy estate gate binds against the latch or scrapes the driveway by mid-March, the problem is almost never the gate panel. It’s alignment. Wooden gates absorb moisture all winter and swell; iron gates hang differently once a pillar shifts a few degrees. We re-hang, shim, adjust, and recalibrate operators so the gate opens and closes the way it did when it was new. Realignment in Westwood is often the first repair, not a band-aid until replacement.

Trusted Brands We Service in Westwood

We’re certified to service nine major brands, and in Westwood we see a healthy share of Viking operators on the bigger estates, Ghost Controls kits on the mid-century colonials, and DoorKing units around University Station. We keep common parts for these on hand so we’re not waiting on a distributor when your gate is stuck half-open. If you’ve got an Elite operator, we service those too. Bring us the brand that’s on the unit, and we’ll tell you straight whether it’s worth repairing or whether the motor’s been failing long before the gate started acting up.

Common Gate Repair Problems We See in Westwood Homes

Westwood’s housing stock skews toward substantial colonials, garrisons, and contemporary executives set back on wooded lots. That’s a very specific kind of gate hardware, and it fails in very specific ways. Here’s what we see most often:

• Frost heave shifting pillar foundations. The 48-inch frost line under Westwood pushes shallow footings up every winter, tilting brick pillars and throwing swing gates out of plane. If your gate sticks every March but works fine by June, it’s the footing, not the motor.
• Salt corrosion on hinges and operator arms. Long private driveways mean heavy salt use, and salt spray travels. We replace and weld corroded hinge barrels and arm brackets on a weekly basis during winter. The gate still swings, but the metal is eating itself from the inside out.
• Wooden gate frames swelling and binding. The older wooden gates around Westwood absorb winter moisture, swell, and jam latches or auto-close sensors. By late March they’re out of adjustment just enough to stop mid-cycle or refuse to close fully.
• Underground operator failures. Westwood’s high-end estates often use underground swing operators, and those take the worst of the freeze-thaw abuse. Water gets in, freezes, expands, and the internal gear train eats itself. We diagnose these on site, and we don’t sell you a new underground motor when a re-grease and recalibration fixes the problem.

Pricing for Gate Repair in Westwood, MA

We Also Serve Cities Near Westwood

We handle Gate Repair in Westwood and the surrounding towns, including Norwood, Dedham, Needham, and Canton. Most calls in this part of Norfolk County get a same-day visit when it’s a repair, because we keep parts close and we don’t route through some far-off call center.

FAQs - Gate Repair in Westwood