Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across West Memphis
Gate repair in West Memphis usually costs $135 to $460 for common fixes like hinge replacement, post resetting, and operator repair, and our crew can reach most homes in 72301 and 72303 the same day you call. We carry parts for Viking, DoorKing, Elite, and Ghost Controls operators on the truck, so we don’t have to make you wait on a shipment from Memphis. Call (877) 610-2993 and you’ll talk to Hal Gatewood, not a voicemail tree.
Why Gatewood Fence & Gate Is West Memphis’s Preferred Gate Repair Company
We’ve been at this since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That matters in a town like West Memphis, where people still ask around before they hire. The person who answers the phone when you call from the neighborhoods off East Broadway or the streets around Meadowbrook Country Club works for the company that answers the phone. There’s no dispatch queue and no call center three states away.
West Memphis homeowners call us after a previous company quoted one price on the phone and then tried to charge another at the door. We don’t do that. The price we quote before the work starts is the price you pay. With our calls answered by a live person 24/7, you’ll actually reach a human who knows gate repair in West Memphis when your gate refuses to close at 6 a.m. on a workday. Hal founded this company in 2001 and still runs it himself. We serve West Memphis directly from the brand’s Memphis office, which means response times are measured in minutes, not days. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings us back, no runaround.
- Locally owned, owner-operated since 2001: Hal Gatewood’s name is on the shop, the invoice, and the work.
- 90-Day Done Right Promise: Stamped in writing on every job, not buried in fine print.
- Live person, 24/7: No voicemail, no chatbot, no queue.
- Upfront pricing: Quoted and agreed before any work starts. Always.
- Certified on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Our Gate Repair Services in West Memphis
Hinge & Post Repair
This is the bread and butter of Gate Repair in West Memphis. The gumbo clay here swells every spring when the water table rises, and it shoves gate posts out of plumb by a half-inch or more. A gate that swung fine in October won’t close by April because the hinge post has moved. We dig down past the clay layer, reset the post in concrete, and replace the worn hinge leaves so the gate hangs straight again. We do the welding on site at your driveway, so your gate never leaves the property.
Gate Realignment
When a gate drags on the latch side or binds on the hinge side, the post is usually the culprit, not the panel. Fix the panel without the post and you’ll fix it twice. We re-plumb the post, re-set the hinges, and adjust the throw so the gate closes true. In neighborhoods off South Avalon Street and the older developments near the interstate, we see this every spring after the clay shifts. The fix starts with the post, not the gate.
Electric Gate Repair
Older operators in West Memphis, especially on the 1940s to 1970s chain-link stock, often lack modern entrapment protection required by UL 325. We retrofit what can be retrofitted, replace control boards where needed, and tell you honestly when our Gate Motor & Opener in West Memphis makes more sense than chasing an obsolete one. We service Viking, Ghost Controls, DoorKing, and Elite among the nine brands we’re certified on, and we often have the boards and sensors on hand for a fast turnaround.
Automatic Gate Repair
When an automatic gate stops responding to the remote or the keypad, the problem is usually the control board, the limit switch, or a low-voltage wire that got chewed. Gate Access Control in West Memphis issues like these are what we diagnose before we replace. We diagnose before we replace. On rack and pinion slide gates in the 72303 area, worn rack teeth and misaligned pinions account for a lot of repeat failures. We’ll show you what failed and why before we touch anything.
Lock Repair
Gate locks rust faster in West Memphis than in the drier towns to the west. The near-constant humidity from the river bottom and seasonal standing water work their way into lock cylinders and latches. We repair or replace gate locks and match them to your existing keying where possible, and we’ll be honest when a quality replacement lock costs less than trying to rebuild a rusted one.
Weld & Rust Repair
Chain-link is the dominant fencing in West Memphis, and the bottom rails and hinge pivots take a beating from the humidity. We cut out rusted sections, weld in new steel, and grind the repair smooth-part of our Gate Parts & Welding in West Memphis service. The welding happens at your gate, in your driveway, while you watch. If the rust has compromised the structural integrity of the post or the frame, we’ll show you and tell you straight what needs replacing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Memphis
We’re certified to service nine major gate brands, and we regularly work on Viking, DoorKing, Elite, and Ghost Controls operators in West Memphis. Because we serve this area directly, we keep common boards, sensors, and replacement parts stocked for these brands, which means many repairs happen on the first visit. When a part has to be ordered, we tell you up front what it costs and when it’ll arrive. No surprises, no open-ended invoices.
Common Gate Repair Problems We See in West Memphis Homes
- Spring post heave from gumbo clay. The alluvial soil under West Memphis swells when saturated and shrinks when dry, moving gate posts out of plumb every spring. This is the single most common failure we see, and it’s why post resetting is a standard part of our service here, not an occasional add-on.
- Rust at hinge pivots and ground-level frame sections. The river bottomland climate means near-constant humidity and seasonal standing water in low-lying lots. Hinge pins seize, bottom rails corrode through, and gate locks bind. We cut out the rust and weld in new steel on site.
- Obsolete control boards from the pre-UL 325 era. Many West Memphis homes still have the original operator from decades ago, often without entrapment protection. We’ll retrofit what’s safe to retrofit and replace what isn’t, and we’ll explain the difference in plain English.
- Deferred maintenance on older chain-link gates. The modest mid-century homes here often have gates that haven’t been serviced in a decade or more. By the time we arrive, the gate has failed completely rather than showing early signs of sag or rust. We rebuild from the post up when that’s what the gate needs.
Pricing for Gate Repair in West Memphis, AR
Here’s what you can expect to pay for common gate repairs in West Memphis. Hinge replacement on a chain-link gate runs $135 to $220 including parts and labor. Post resetting with new concrete runs $260 to $410 depending on how deep we have to dig to get below the gumbo clay. Control board replacement for a Viking or Ghost Controls operator runs $180 to $340 depending on the model. Gate realignment typically runs $150 to $280. Every quote is firm and agreed before we start. There’s no trip charge inside Crittenden County, and we’ll apply $40 off any repair over $200 automatically. Seniors and veterans get a permanent 10% discount on all work. Call (877) 610-2993 for an exact quote, and remember we’re happy to give a free second opinion on any written estimate you’ve received from another company.
We Also Serve Cities Near West Memphis
Beyond West Memphis, our crews serve Marion and the surrounding Crittenden County communities with the same 90-Day Done Right Promise and the same live-person phone answer. If you’re in Marion or anywhere else nearby, call us and we’ll be there.
Serving West Memphis, AR - Our Local Coverage Area
We’re based in the West Memphis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in West Memphis
The gumbo clay under West Memphis swells when the water table rises each spring, pushing your gate post outward by up to an inch. That movement changes the hinge geometry and prevents the gate from closing. The fix is a post reset dug down past the clay layer, not another adjustment to the hinges. Call (877) 610-2993 and we’ll dig the post out and set it right.
In many cases, yes. We can add current entrapment protection sensors and update the control board on older operators in the 72301 area, provided the motor and gearbox are still sound. We’ll assess what you have and be straight with you about whether retrofitting is safe and cost-effective or whether a new operator from our certified brands makes more sense. Call us and we’ll look at it for free.
It’s common here, but it’s not something to ignore. The Mississippi River alluvial clay under West Memphis heaves when saturated, and a full inch of lean means the post footing has let go. Left alone, the gate will bind, drag, and eventually fail at the hinges. Post resetting with a deeper concrete footing is the standard fix, and it’s a service we perform regularly across 72301 and 72303. We’ll come out and show you what’s moving and why.
Rust at the hinge pivot points and ground-level frame sections is the most common failure on chain-link gates in West Memphis, driven by the constant humidity and seasonal standing water from the river bottomland location. The bottom rail rots through, the hinge pin seizes, and the gate starts to sag. We cut out the rusted steel, weld in new sections, and replace the hinge leaves on site. Call (877) 610-2993 for a free estimate.
Yes. We repair rack and pinion slide gates throughout the 72303 area, including worn rack teeth, misaligned pinions, and failed limit switches. We rebuilt one in the old neighborhood near the I-55/I-40 interchange where a Viking operator and a rusted hinge post had both given out after years of soil movement. Our crew dug a new post footing down past the gumbo layer, reset the post in concrete, replaced the rusted hinge leaves, and re-aligned the rack and pinion on a slide gate at the same property, all before the spring heave hit again. That’s the kind of repair we do all over West Memphis. Call us and we’ll come take a look for free.
Contact Gatewood Fence & Gate for Gate Repair in West Memphis
If your gate is sagging, dragging, or refusing to close, call Hal Gatewood at (877) 610-2993 now. We’ll give you an honest quote over the phone, tell you when we can be there, and stand behind the work with the 90-Day Done Right Promise. No trip charge inside Crittenden County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. You’ll talk to a live person, and the work will be done by someone whose name you’ll see on the invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Memphis and the surrounding communities since 2001.