Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Wayne
Gate repair in Wayne usually comes down to two things: a hinge post that frost has pushed out of plumb, or hardware that’s been eating road salt for fifty years. We fix both, and we fix them in your driveway. Hal Gatewood has been at this since 2001, and the name on the shop is his. If your gate drags, sags, won’t latch, or the opener just hums and does nothing, call (877) 610-2993. A live person answers, not a menu.
Why Gatewood Fence & Gate Is Wayne’s Preferred Gate Repair Company
We’re not the outfit that quotes one number on the phone and another at the door. Hal publishes his address and license number. Wayne homeowners can drive to the shop and look him in the eye if they want to. That’s the oldest accountability there is, and it’s the kind that matters when you’ve been burned before.
Around here, most calls come from the ranch homes built in the 1950s and 60s, where the gate has been swinging since the Ford plant was the biggest employer in town. We know those gates. We know what Michigan Avenue road salt does to a hinge pin, and we know what a Wayne County winter does to a post set in clay. Our Gate Repair team sees the same failure patterns week after week, and we stock parts for them instead of ordering everything out of a catalog.
Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround.
Our Gate Repair Services in Wayne
Hinge & Post Repair
The hinge post is where a swinging gate lives or dies. In Wayne, the clay-heavy subsoil under most yards absorbs winter moisture, freezes, and swells, which shoves posts out of vertical a little more every year. We dig out, true up, and reset posts in properly compacted stone so the gate hangs square again. We also replace corroded hinges with heavier-gauge steel that’ll take another few decades of Michigan weather.

Gate Realignment
A gate that drags the driveway or won’t meet the latch post is almost always a post problem, not a panel problem. We re-hang and adjust gates on Wayne properties every spring, because that’s when the freeze-thaw heave shows up. Fix the panel without the post and you’ll fix it twice – so we start at the post.

Electric Gate Repair
When an opener runs but the gate won’t move, or the gate moves but the opener screams, we trace it. Could be a capacitor, a board, a limit switch, a gearbox, or just a low battery on a solar setup. We service Linear, Viking, Ghost Controls, and DoorKing openers on gates all over Wayne, and we diagnose before we replace anything.

Automatic Gate Repair
Automatic gates fail differently than manual ones because they’re working against any misalignment in the frame. A small sag that wouldn’t bother a hand-swung gate will stall an operator every time. We check the whole system: the hinge line, the post footing, the operator mount, the safety edges, and the control board. Then we tell you what actually needs fixing and what doesn’t.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wayne
We service and stock parts for most major opener brands, including Linear, Viking, Ghost Controls, and DoorKing. That means a Wayne repair doesn’t stall for a week while somebody ships a board from Texas. If your opener is older or discontinued, we can usually match a drop-in replacement or rebuild what’s there. Certified to work on nine major gate brands, but we’re not brand loyal to the point of selling you a new operator when a capacitor would do it.
Common Gate Repair Problems We See in Wayne Homes
- Post-heaved swing gates that sag and scrape every spring. Wayne’s 30-40 freeze-thaw cycles per winter, combined with clay-dense soil that holds water, push hinge posts out of plumb relentlessly. The gate is fine; the post isn’t.
- Rusted and seized drop-rod receivers. On postwar ranch homes, the ground sleeve that catches the gate pin fills with rust flakes and Michigan Avenue road-salt grit. The rod freezes solid and the gate looks broken, but it’s a 20-minute extraction with penetrating oil and the right tool.
- Corroded hinges and snapped pins on original chain-link gates. Many Wayne homes still have the original 1950s-60s chain-link gate hardware, and sixty years of road-salt spray finishes what forty winters of freeze-thaw started.
- Operator burnouts from an unlevel gate. A motor fighting a sagging gate draws more amps, runs hotter, and dies younger. We see this a lot behind long Wayne driveways where the gate is heavy and the post has shifted an inch out of plumb.
Pricing for Gate Repair in Wayne, MI
A typical hinge and post repair in Wayne runs $220-$450, depending on whether we’re resetting one post or two and how much concrete was used in the original install. Gate realignment alone usually falls between $150-$300. Electric opener repairs range from $180 for a simple capacitor or limit switch swap up to $650 for a full control board or motor replacement. Weld and rust repair on a steel or chain-link gate typically runs $180-$400 depending on the damage.
We quote the full price before we touch anything. That price is agreed, in writing, before any work starts. There’s no trip charge inside Wayne County, and we knock $40 off any repair over $200. If you already have a written estimate from another company, we’ll give you a free second opinion. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact number on yours – estimates are free.
We Also Serve Cities Near Wayne
In addition to Wayne, our team covers Westland, Inkster, Romulus, and Canton. If you’re on the edge of town or just over the line, call (877) 610-2993 and ask if we cover your street. Usually the answer is yes.
Serving Wayne, MI - Our Local Coverage Area
We’re based in the Wayne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Wayne
Freeze-thaw heave is the culprit. Wayne’s clay-heavy soil absorbs winter moisture, expands when it freezes, and physically lifts and tilts the hinge post. After 30-40 cycles in one winter, a post that was plumb in October is leaning by April. The gate itself is usually fine – the fix is resetting and re-truing the post, not replacing the panel. Call (877) 610-2993 and we’ll tell you if that’s what’s happening at your place.
Almost never. This is one of the most common calls we get on the ranch streets around Michigan Avenue in Wayne. The drop-rod receiver – the sleeve in the ground that the pin drops into – gets packed with rust flakes and road-salt debris over decades. The rod seizes. On one Wayne repair, that’s exactly what our tech found: the receiver was packed solid. Twenty minutes with penetrating oil and a rod extractor, and the gate seated and latched cleanly. No new gate, no new hardware. Call (877) 610-2993 before you buy a replacement.
Yes. Solar openers work well for many Wayne-area properties, especially where running an electrical line to the gate would mean trenching hundreds of feet. We size the panel and battery to the operator and the number of cycles per day. For a wide farm gate or a heavy steel gate, we spec a larger panel and dual batteries so the system keeps working through Michigan’s short winter days. The safety edges and entrapment protections are the same as any main-powered opener.
Automatic gates in Michigan must have the same UL 325 entrapment protections required everywhere: monitored safety edges or photo eyes, reverse-on-contact, and a manual release that works from outside if the power fails. If a gate predates these requirements and we’re servicing the operator, we’ll tell you. Not because we want to upsell, but because an automatic gate that can close on a person or a vehicle is the one thing on the property that genuinely shouldn’t be left as-is. Call (877) 610-2993 and we’ll go over what your gate has and what it needs.
Operator size follows three measurements: gate width, gate weight, and how many cycles it runs per day. A wide farm gate – anything over 16 feet – needs an operator rated above the gate’s actual weight, because long gates put more leverage on the hinge post and the opener. We also factor in wind load on a wide, flat gate, which matters out in the open farmland around Wayne. We spec the operator, mounting plate, and power supply to match, and we quote it before any work starts. Call (877) 610-2993 and we’ll measure it free.
Contact Gatewood Fence & Gate for Gate Repair in Wayne
If your gate is sagging, stuck, grinding, or just won’t open, call (877) 610-2993. Hal Gatewood answers. You’ll get a real conversation about what’s wrong, a straight number on what it costs to fix, and a 90-Day Done Right Promise in writing. We serve all of Wayne, including the neighborhoods along Michigan Avenue and the surrounding residential streets. The name is on the shop. The shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wayne since 2001.





Before
After
Before
After
Before
After