Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Union Park
Gate repair in Union Park usually costs between $185 and $520 depending on what failed, and most hinge, post, and weld repairs can be done the same day we hear from you. We work on the 1960s-to-1980s galvanized gates that dominate this unincorporated Orange County community, and we know exactly how the storm season here abuses them. Call (877) 610-2993 and you’ll get a person, not a queue. If the gate is stuck open or failed shut, we treat that as urgent and get a truck to your street quickly.
Why Gatewood Fence & Gate Is Union Park’s Preferred Gate Repair Company
The name on the shop is Hal Gatewood’s, and he has been fixing gates since 2001. That matters in Union Park, where a lot of the work we see is repair someone else quoted as “replace.” Hal welds on site, in your driveway, so the gate never leaves your property. The Gate Repair team has rebuilt hinge posts off Dean Road, re-welded ornamental-iron frames near the 32790 corridor, and replaced lightning-fried operator boards on Azalea Park-adjacent streets. Homeowners here tell us the same thing: they want someone who shows up, tells them the truth, and fixes the problem without inventing extras.
We’re a locally owned, owner-operated company with a published address and a license number anyone can look up. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. That’s the kind of accountability that makes sense when the shop is down the road and the owner answers his own phone. We serve all of Union Park with no trip charge inside the county.
Response Time to Union Park
Most Union Park repair calls get same-day or next-morning scheduling. Storm-related failures in June, July, and August spike hard, so if your gate is dragging after an afternoon downpour, call early. We prioritize gates that won’t close or won’t open because that’s a security problem, not an inconvenience.
What Union Park Customers Tell Us
We hear a consistent story in 32790: the gate worked fine for years, then one thunderstorm later the operator hums and nothing moves, or the gate drags a rut into the side yard. That’s why our Gate Repair crew keeps hinge bearings, loop detectors, and replacement circuit boards on the truck for the brands common in this neighborhood. Fix the panel without checking the post and you’ll fix it twice. We start at the post.
Our Gate Repair Services in Union Park
Electric Gate Repair
Electric gate repair in Union Park runs $210 to $740 depending on whether the fault is in the operator, the loop detector, the control board, or the wiring between them. Central Florida’s six-month storm season sends lightning-induced surges through power lines here constantly. A dead keypad, a gate that reverses for no reason, or an operator that hums without moving all point to surge damage. We test the circuit, replace what died, and re-check entrapment protection before we leave.
Automatic Gate Repair
Automatic gate repair in Union Park usually costs $195 to $680. We service Linear, Viking, Ghost Controls, and DoorKing operators found throughout this area’s older homes. Storm surges are the big killer here, but so is the slow failure of aged limit switches on 20-year-old openers. When the gate stops mid-travel or slams at the end of its cycle, that’s almost always a limit switch or a slipping belt. Our Gate Repair techs diagnose the fault before replacing anything, and you approve the number before we turn a wrench.
Hinge & Post Repair
Hinge and post repair in Union Park typically runs $260 to $590 per gate. The flat, sandy soil here plus a shallow water table means fence posts shift after heavy summer rains, and once the post leans, the gate sags. We dig out the post, re-set the footing in compacted gravel, and re-weld or re-bracket the hinge leaves. A gate sags in the hinge post, not in the middle. So that’s where we start, every time.
Gate Realignment
Gate realignment in Union Park runs $165 to $350 for a typical single swing gate. After the daily summer thunderstorms soak the ground and the sandy soil settles unevenly, gates drag, bind, and twist. We correct the hinge geometry, shim or re-weld where the frame has pulled, and set the drop rod so the gate actually catches. On the 1960s-era ornamental-iron gates common off State Road 50 and near the Little Econ Greenway, decades of mineral-heavy irrigation water have corroded frame seams that complicate any simple adjustment. We handle that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Union Park
We’re certified to service nine major gate brands, and in Union Park the ones we touch most are LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. Parts for those live on our trucks, so we don’t have to run back across town when your opener board is fried and your gate is stuck half open. Certified service on the opener, welded repairs on the frame. One call to (877) 610-2993 handles both.
Common Gate Repair Problems We See in Union Park Homes
These are the failure modes we see week after week in Union Park specifically, not a generic list copied from somewhere else:
- Wind load on solid-infill gates: Afternoon thunderstorms punch gusts into gates with aluminum or wood infill panels, and every gust levers against the hinge post and frame welds. On a 45-year-old galvanized frame, cracks that were hairline in May are through-welds by August.
- Post footings settling in saturated sandy soil: Union Park sits on flat, quick-draining sand with a high water table. When heavy June-through-August rain saturates the ground, post footings shift, and suddenly the gate drags a groove into the grass. We dig and re-set footings with compacted gravel to stop the annual sag.
- Corrosion from mineral-heavy irrigation water: Central Florida’s hard groundwater has been fed through sprinkler systems onto these gates for decades. Hinge pins seize, latch boxes rot out, and frame welds crystallize. We cut out the rot, weld in new steel, and treat the repair so it doesn’t rust through in three years.
- Lightning-surge damage to operators and loop detectors: The six-month storm season puts control boards at risk from nearby strikes. A gate that chatters, reverses halfway, or won’t respond to the remote after a storm usually has a toasted board or a shorted loop detector. We stock replacements for the common brands.
Pricing for Gate Repair in Union Park, FL
Here are straight numbers for the Union Park market, not ranges pulled from a national chart:
- Gate realignment: $165-$350
- Hinge and post repair: $260-$590
- Weld and rust repair: $150-$480 depending on how much frame we have to replace
- Electric gate opener repair: $210-$740
- Automatic gate operator replacement: $680-$1,400 for the operator, labor included
- Lock repair or replacement: $85-$240
Every price is quoted and agreed before we start. No number changes at the door. We offer $40 off any repair over $200, a free second opinion on any written estimate you’ve received, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll talk through what you’re seeing.
We Also Serve Cities Near Union Park
We work throughout east Orange County. If you’re in Winter Park, Azalea Park, Goldenrod, or Alafaya, the same crew that covers Gate Repair in Union Park can get to you, usually within the same day. Call (877) 610-2993 and tell us what the gate is doing.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Union Park
Every automatic gate opener has a manual release mechanism, usually a pull handle or keyed release on the operator itself. Pull it to disengage the drive, then push the gate open by hand. The procedure differs by brand, so if you’re not sure where the release is or the gate won’t budge after disengaging, call us at (877) 610-2993 and we’ll walk you through it. Don’t force the gate: if the wind jammed it against a shifted post, forcing it open can bend the frame. And on a LiftMaster or Viking, the release needs to be re-engaged once power is back or the operator will freewheel the next time it tries to close.
Blame the flat, sandy soil and the shallow water table. When the afternoon thunderstorms saturate the ground, the sand loses bearing strength, and posts set in shallow concrete collars shift. In Union Park, most original 1960s-to-1980s gates were set in footings that were too shallow for Florida’s drainage realities. The permanent fix is digging the post out, setting a deeper footing in compacted gravel, and re-welding the hinge. That’s a $260 to $590 job dependable on how far gone the footing is. Call (877) 610-2993 for a straight answer on your gate.
The hinge post. A gate sags in the hinge post, not in the middle. On Union Park’s older homes, the post has spent decades leaning against saturated sandy soil while the panel itself is usually just hanging off it. If the post is sound, the panel can be re-hung and re-welded. If the post is rotted at the base or leaning more than a few degrees, swapping face plates without re-setting the post is a waste of your money. You’ll fix it twice. We re-set the post first.
Twice a year, and definitely once after the first big June storm. Entrapment protection includes the safety photocells across the gate opening and the force-sensing reverse on the operator. Lightning surges can scramble a control board without fully killing it, and a gate that reverses too late or fails to reverse at all is a serious safety hazard for a kid or a dog. We test the photocells, the force reverse, and the loop detector every time we touch an operator. It’s part of the repair, and the test takes ten minutes.
In most Union Park yards, yes. We can keep your existing chain-link frame and weld in a striker post and lock box for an electrified latch, then mount a keypad and receiver off the existing operator or a new one. The frame is usually still sound even when the hardware is rotted out. If the hinges are seized or the post is leaning, we address that first. The full conversion typically runs $540 to $1,100 depending on operator condition. Call (877) 610-2993 and we’ll tell you what your gate will actually need.
Call Gatewood Fence & Gate for Gate Repair in Union Park
If your gate is dragging, sagging, stuck, or simply won’t respond after a storm, call (877) 610-2993. You’ll speak to a person. We’ll give you a free estimate, show up in the window we promised, and finish with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Union Park and east Orange County.