Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Union Park
Gate parts and welding in Union Park comes down to one thing: knowing which failures are actually fixable. Most companies in the 32790 zip code want to sell you a whole new gate when the real problem is a rotted hinge post, a cracked weld, or a set of rollers that gave up years ago. We’d rather fix what’s there. Hal Gatewood has been repairing gates since 2001, and the answer to most Union Park gate failures is a welder, not a replacement. Call (877) 610-2993 and a live person picks up. We come to neighborhoods across Union Park, from the older streets east of Dean Road to the acreage lots off Lake Underhill Road.
Why Gatewood Fence & Gate Is Union Park’s Preferred Gate Parts & Welding Company
We run into the same thing in Union Park over and over: a gate that’s been “fixed” twice by somebody who swapped a part but never dealt with the post underneath. Union Park’s flat, sandy soil and shallow water table mean hinge posts rot below grade in a way that doesn’t show up until the gate starts dragging in June. Our crew knows that pattern because we’ve welded gates on these streets for years, and we bring the welder to your driveway instead of hauling your gate to a shop you’ll never see.
There’s no dispatch queue here. When you call Gatewood Fence & Gate, the person who answers is local to Central Florida, and when Hal says he’ll be there, he means it. Every job gets the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back. No runaround. Union Park homeowners also get a free second opinion on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. We publish our address and license number because the name on the shop is the name on the invoice.
Our Gate Parts & Welding Services in Union Park
Hinge Replacement
A gate sags in the hinge post, not in the middle. On Union Park’s 1960s and 1970s properties, those original galvanized hinges have spent decades soaking in Central Florida’s hard, mineral-laden irrigation water. We cut the old hinge off, weld in a new one rated for the panel weight, and shim the post so the gate swings true again. If the hinge failed because the post moved, we fix that first. Otherwise you’ll be calling us back next summer.
Post Replacement
This is the service Union Park needs more than any other, and it’s the one generic gate companies skip. Here’s why: Union Park sits on flat, sandy lots with a water table close enough that a fence post set only 24 inches deep will shift after every heavy rain. We see hinge posts that looked fine above ground but rotted below the sand line, held together by nothing but paint and habit. We set a new post footing down 32 to 36 inches, backfill with concrete, and weld the gate back onto a post that actually stays put. Orange County code applies out here, not a city ordinance, and we know what that means for setback and easement rules on Union Park properties.
Rail Repair
Top and bottom rails on older ornamental-iron gates crack at the welds first. The panel flexes, the crack spreads, and the gate starts to rack. On Union Park’s 1980s ranch homes, rail cracks are common because the original thin-wall tube stock was never meant for 40 years of Florida humidity and daily use. We’ll weld a gusset or sleeve the rail, whichever keeps the gate strongest without adding weight it wasn’t designed to carry.
Custom Welding
Some gates need more than a patch. Maybe you bought a property off Lake Underhill Road with a 14-foot custom swing gate that’s racked out of square. Maybe you need a mounting plate reinforced for a Linear operator, or a rack and pinion drive welded onto an existing chain-link farm gate. Our crew brings welders, grinders, and plate stock to the site. The gate stays in your driveway. Custom welding in Union Park usually runs alongside a post or hinge repair, because on these lots the steel and the soil fail together.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Union Park
We’re certified to service nine major gate brands, and for Union Park we keep parts moving for Linear, Viking, Ghost Controls, and DoorKing. Our service area matches the older housing stock out here: lots of Linear operators on 1990s gates, plenty of Ghost Controls on newer retrofits, and a healthy number of Viking and DoorKing units on larger acreage and commercial-style entrances. We stock common control boards, photocells, and remotes for these brands so a repair doesn’t mean waiting a week for a part that could have been in the truck. If we don’t have the part, we tell you that before we start the meter, not after.
Common Gate Parts & Welding Problems We See in Union Park Homes
- Hinge posts rot below the sand line. Union Park’s sandy soil drains fast, but the water table sits close enough that a steel post set 24 inches deep stays wet year-round. Irrigation runoff makes it worse. The post looks solid at ground level and crumbles the moment you dig down.
- Swing gates drag every June through August. The heavy summer rains that flood low-lying east Orange County lots push posts out of plumb. Gates that cleared fine in January start dragging in July. It’s not the gate bending. It’s the post settling.
- Loop detectors false-trip after lightning surges. Union Park gets close to six months of near-daily thunderstorms, and the inland location means some of the most lightning in Central Florida. A nearby strike sends a surge through the loop detector and control board, and suddenly the gate cycles open for no reason. Usually the board survives; the detector doesn’t.
- Wide farm gates rack out of square. On the acreage side of Union Park, a 16-foot gate hanging off a settled post acts like a lever. The rack and pinion drive binds, the panel twists, and the welds at the hinge plates start cracking from stress that never should have been there.
Pricing for Gate Parts & Welding in Union Park, FL
A typical hinge replacement in Union Park runs $180 to $360 per hinge, depending on panel weight and whether the post needs shimming. Post replacement is the bigger job: $450 to $1,200 for a hinge post on an average residential gate, including concrete. Rail repair usually lands between $150 and $400 for a cracked weld, and custom welding starts around $150 plus materials, with most Union Park jobs finishing between $300 and $1,500 depending on scope. You’ll get a firm price before any work starts. The quote Hal gives you is the price on the invoice, no trip charge inside the county, and estimates are free. Call (877) 610-2993 and we’ll talk through what yours needs.
We Also Serve Cities Near Union Park
Our Gate Parts & Welding work in Union Park puts us in Winter Park, Azalea Park, Goldenrod, and Alafaya most weeks. The soil changes when you cross into Winter Park, which means the failure pattern changes too. We’re familiar with each area’s homes and gate types. If you’re just outside Union Park, call and we’ll get you scheduled.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Union Park
Because your hinge post is settling in saturated sandy soil, not because the gate bent. Union Park’s flat lots and shallow water table mean heavy June-to-August rain pushes posts out of plumb just enough that a gate that cleared fine in spring starts dragging by July. The fix is resetting the post deeper, usually 32 to 36 inches, and welding the hinge plates back on square. Call (877) 610-2993 and we’ll check whether it’s the post or the panel before you spend money on the wrong repair.
Yes, we can weld a rack and pinion drive onto an existing chain-link farm gate in Union Park, provided the panel and posts are structurally sound. We do this regularly on the acreage lots east of Dean Road, where gates are wide and heavy. If the post is rotted or the panel is racked, we fix that first, then mount the drive, then set the travel limits. Free estimate: call (877) 610-2993.
Solar is practical for a Union Park driveway gate where running 120V would cross an easement or require a long trench. Solar operators work well on our flat, sunny lots, and we usually pair them with a Linear or Ghost Controls unit sized for the panel weight. You’ll need a panel, battery bank, and ideally a trickle backup. We’ll spec the right setup and install it in one visit. Call (877) 610-2993 for specifics on your gate.
Because in Union Park the original post was probably set 24 inches deep in sand, where the water table and summer rains shift it every year. A 24-inch footing in sandy soil with a shallow water table is not “well set” by any honest standard. We set replacement posts 32 to 36 inches deep, in concrete, and we’ve watched gates that tilted for twenty years finally stay square. Call (877) 610-2993 and we’ll dig it out and do it right.
You need entrapment protection on any automated gate that swings over an area where a person could walk. Orange County code doesn’t care that it swings over your own pasture. A gate that closes on a grandchild or a delivery driver is the same hazard whether the land is yours or not. We install safety photocells and contact edges on every automated gate we touch in Union Park. Call (877) 610-2993 and we’ll show you what’s compliant without spending more than the gate is worth.
What Makes Union Park Gate Repairs Different
Here’s the information most gate sites won’t give you, because it only applies to Union Park. This community is unincorporated Orange County, which means gate and fence projects follow county code, not a city ordinance. That matters when you’re replacing a post near a property line or mounting an operator on an easement-adjacent fence. More important is what’s under the gate: Union Park’s sandy soil with a shallow water table means post footings and hinge posts shift after every heavy summer rain. When we ran a sag correction on a 14-foot custom swing gate off Lake Underhill Road, the original 1970s hinge post had rotted below grade in sandy soil, throwing the panel out of square. Our crew set a new post footing 32 inches deep, welded a reinforced face plate, and hung a LiftMaster operator with a safety photocell. The gate now clears its arc without dragging even after a week of afternoon storms. But the point is this: the failure map for Union Park is different from the failure map for Winter Park, where the clay holds posts steady and rust is a slower enemy. Out here, sand and storm season decide when your repair actually fails. A gate company that doesn’t know that will sell you a patch that fails in July. We’d rather fix the post and be done with it.
Get Your Union Park Gate Fixed by Someone Who Answers the Phone
If your gate is dragging, sagging, or refusing to close, call (877) 610-2993. You’ll get a person, not a recording. We’ll ask what street you’re on in Union Park, what the gate looks like, and what it’s been doing. Then we’ll give you a straight answer about what it’ll take to fix it. Hal Gatewood has been at this since 2001, his name is on the shop, and he’ll hand you his cell number. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job. If it’s not done right, we’re back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Union Park since 2001.