Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across The Bronx
A sagging gate in The Bronx usually fails at the post, not in the middle, and that’s where we start. Gatewood Fence & Gate handles electric gate repair, hinge and post repair, gate realignment, and on-site welding from Parkchester to Van Nest, with a live person answering the phone 24/7. Most repairs in the 10462 zip are quoted and agreed before any work starts, and Hal Gatewood’s name is on every invoice. Call (877) 610-2993 for a free estimate and we’ll tell you straight whether the post needs re-anchoring or the hinge is just rust-seized.
Why Gatewood Fence & Gate Is The Bronx’s Preferred Gate Repair Company
We’ve been owner-operated since 2001, and Hal Gatewood still walks his own jobs. The Bronx’s gate repair market is different from anywhere else in the metro area. This borough runs on shared entry gates, courtyard gates, and perimeter gates anchored into brick that’s older than most of the people repairing it. That changes how we work. We don’t sell a replacement gate when the post is the problem. We don’t swap out an opener when the hinge is binding. We fix the failure, not the symptom, and the 90-Day Done Right Promise is stamped in writing on every job.
Our crews serve The Bronx locally, coordinated from the New York City office. Customers tell us the same thing about national outfits: quoted one number on the phone, got another at the door. That doesn’t happen here. The price we quote before the repair is the price you pay, and if something isn’t done right, one call brings Hal back. You can also drive to the shop and look him in the eye. The name is on the shop, and that’s the oldest accountability there is.
Our Gate Repair Services in The Bronx
Hinge & Post Repair
In The Bronx, a gate sags in the hinge post, not in the middle, and that is where we start. The 10462 ZIP is anchored by Parkchester, a 1938 to 1942 planned residential campus whose original ornamental metal gates are now 80-plus years old, and whose hinge posts are mortared directly into brick piers that have spalled and shifted over decades. On those jobs we typically cut away the rotted mortar, set a new post footing with epoxy anchors, and realign the hinges. The gate stays in your driveway the whole time.
Gate Realignment
Freeze-thaw cycles do real damage in The Bronx. Temperatures cross 32°F dozens of times each winter in New York City, and that repeated heaving knocks swing gates out of plumb and binds the hinges, especially on sidewalk-adjacent concrete along Morris Park and Parkchester blocks. Gate realignment means resetting the post, not just shimming the gate leaf. Fix the panel without the post and you’ll fix it twice. We show you exactly where the gate is failing before any work begins.
Electric Gate Repair
Most electric gate failures in The Bronx come down to operator strain from a gate that was already dragging, or rust-seized hinges that force the motor to work harder than it should. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators, and we diagnose the entire system, not just the electronic symptom. Show me the gate closing on its own and I’ll show you where it’s failing. The opener usually has years left if the mechanical side is corrected in time.
Weld & Rust Repair
Heavy municipal road-salt use on Bronx streets and sidewalks accelerates oxidation on exposed iron and steel hardware. By late winter, rust-seized hinges and corroded latch mechanisms are the dominant failure mode across 10462 rowhouse blocks and East Tremont’s attached pre-war brick homes. We weld on site, which means we don’t haul the gate off and you don’t wait a week. Cracked pickets, rotted bottom rails, broken latch brackets, snapped hinge leaves, all of it gets welded where it stands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Bronx
Gatewood Fence & Gate is certified to service nine major gate brands. Around The Bronx we see a lot of Linear and DoorKing operators on older commercial roll-downs, and Viking and Ghost Controls on residential driveway gates in the northern parts of the borough. We carry common parts for these brands locally, and when a part isn’t in stock we can usually have it the same week. We’ll also tell you honestly when an opener is past saving, and the quote for a replacement is never padded because we don’t do that.
Common Gate Repair Problems We See in The Bronx Homes
- Rust-seized hinges on street-adjacent gates: Road salt spray oxidizes hinge pins and plate hardware every winter. The fix is cutting out the old hinge, welding in the new one, and treating the surrounding metal to slow the next cycle.
- Posts heaving out of sidewalk concrete: Freeze-thaw cycles shift the footing, the gate loses plumb, and the hinges bind. We re-core the footing and re-anchor the post, which is a permanent repair, not a seasonal adjustment.
- Aging Parkchester ornamental gates: Original mid-century gates often have non-standard hinge spacing and custom fabricated brackets, so off-the-shelf parts don’t fit. We fabricate the replacements on site to match.
- 1990s roll-down gate motors failing: Along Westchester Avenue and White Plains Road, original 1990s security gate motors are reaching the end of their service life. We rebuild where possible and replace only when the motor and spring assemblies are truly done.
Pricing for Gate Repair in The Bronx, NY
A typical hinge repair or gate realignment in The Bronx runs $180 to $340, including the hardware and labor. Weld and rust repair on an ornamental gate usually lands between $250 and $600 depending on how many pickets and rails need cutting and welding. Electric gate repair runs $200 to $450 for the diagnosis and mechanical correction, and if the operator itself needs replacing, that’s quoted separately before any work begins. Full operator replacements on The Bronx commercial roll-downs range from $900 to $2,200 depending on motor size and spring assembly. Every estimate is free, the price is agreed before we start, and we knock $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll quote the job over the phone, no trip charge inside the county.
We Also Serve Cities Near The Bronx
Our crews work throughout the northeastern Bronx and into the bordering neighborhoods. That includes Gate Repair in The Bronx proper, plus Morris Park, Parkchester, Van Nest, and East Tremont. If you’re a block or two outside those lines, call anyway. Chances are we’re already working within ten minutes of you, and it costs nothing to check.
Serving The Bronx, NY - Our Local Coverage Area
We’re based in the The Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in The Bronx
The original Parkchester gates are anchored into brick piers that have been expanding and contracting for 80-plus years, and the mortar between the bricks has turned to dust in places. A repair that only patches the surface mortar will fail again within a year or two. We cut out the rotted mortar, set the post with epoxy anchors, and re-point the surrounding brick so the post actually has something to hold onto. That’s the difference between a visual fix and a repair that stays. Call (877) 610-2993 and we’ll come look at the pier before you spend another dime on a quick patch.
Often, yes. A 25-year-old roll-down motor that hums but won’t move is frequently a failed capacitor, a stripped clutch, or a snapped tension spring, all of which are replaceable parts. We’ll diagnose the motor on site and tell you honestly whether a $100 to $300 component fix buys you years or whether the motor assembly is genuinely spent. You’ll get the answer before any work starts, and the quote is the price.
Probably not. When a courtyard gate drags on the concrete in The Bronx, the typical failure is the hinge post pulling loose from a spalled brick pier, which throws the whole gate out of plumb. We re-anchor the post and realign the hinges, and the gate generally clears the concrete again. A new gate would cost several times more and would fail the same way in a few years if the post wasn’t addressed. Show me the gate dragging and I’ll show you where it’s failing.
Yes, and for Parkchester’s ornamental courtyard gates, underground operators are often the right choice because they preserve the visual line of the gate and don’t require an arm mounted to the brickwork. The excavation is done carefully around existing brick and sidewalk concrete, we quote the full power run and safety edges upfront, and the operator is matched to the gate’s weight and swing. This is measured work, not same-day work, and you get a written price before anything is ordered.
Yes, and that’s the whole job. On 1920s through 1940s attached rowhouses in The Bronx, the gate hinges are mortared into brick piers that are already fragile, so we cut and weld carefully, shield the brick from heat, and use a low-profile approach that doesn’t require chipping out more mortar than necessary. The goal is to fix the gate and leave the pier stronger than we found it. Call (877) 610-2993 and we’ll come assess the rust damage before you or your neighbor attempt a leverage fix that cracks the pier.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving The Bronx since 2001.