Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across The Bronx
Gate parts and welding in The Bronx usually means one of two things: a courtyard gate off Metropolitan Avenue that’s sagged past saving, or a roll-down security gate on Westchester Avenue whose 25-year-old operator finally quit. Most of the time we can fix it on the spot. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and we weld on-site in the driveway, the courtyard, or the alley so the gate never has to leave your property. If you’re standing in front of a gate that won’t latch at 9 at night, call us at (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is The Bronx’s Preferred Gate Parts & Welding Company
We keep our published address and license number where anyone can look them up. Hal Gatewood’s name is on the shop and on every invoice. That matters to Bronx homeowners and building supers because so many gate outfits here are out-of-area crews who fix one hinge and disappear. We live with our reputation. The person who shows up has a name, a uniform, and a background check behind them.
Customers around Parkchester, Van Nest, and Morris Park keep calling us back because we repair before we replace. A sagging gate is almost always a post problem or a hinge-barrel problem, not a whole-gate problem. We tell you that before we quote, not after. Every job carries the 90-Day Done Right Promise in writing. If it isn’t done right, one call brings Hal back. No runaround. No fine print.
Response time to The Bronx runs fast, often same morning on weekdays, because our crews work this part of the city every day. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail, not a queue, not a bot. You can also drive to the shop and look Hal in the eye if you want to. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in The Bronx
Hinge Replacement
In The Bronx, hinge replacement is rarely a simple swap. Many courtyard gates in the 10462 ZIP were installed in the 1940s with non-standard hinge barrels and latch keepers that don’t match anything on a modern parts shelf. We cut out the seized old iron, weld in new heavy-duty barrel hinges matched to the original post spacing, and re-hang the gate so it swings clean. Fix the panel without the post and you’ll fix it twice. That’s where we start.
Post Replacement
Bronx gate posts are usually set directly into brick piers or sidewalk-adjacent concrete, and after decades of freeze-thaw cycles, the mortar spalls, the concrete heaves, and the post shifts. That shift is what throws the gate out of plumb and makes the latch miss. We re-anchor posts with deeper footings and fresh mortar, and when the old post is too far gone, we fabricate and weld a replacement on-site. Your gate stays in your driveway. We don’t haul it away to some shop.
Rail Repair
Long tubular steel rails on sliding gates bend and crack, especially where they carry a heavy welded gate panel or where a delivery truck has nudged the curb track. On shared driveways off White Plains Road, a bent rail means the gate jumps the track and the rollers grind. We straighten or replace rails, rebuild the roller carriages, and get pedestrian and vehicle access working again the same visit.
Custom Welding
This is where The Bronx keeps us busy. Parkchester’s original ornamental gate hardware was fabricated to non-standard dimensions. Hinge barrels, latch keepers, picket spacing - none of it matches off-the-shelf parts. That means replacement almost always requires custom welding and machining rather than a simple hinge swap. We fabricate new panels to match the original picket pattern, weld in replacement scrollwork, and match the patina so the repair doesn’t scream “new part.” We enjoy this kind of work. It’s honest.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Bronx
We service and stock parts for FAAC, BFT, Linear, and Viking openers, along with the rest of the major gate motor brands. For Bronx customers, that matters because ground-level and underground operators age fast in salt and moisture, and you don’t want a gate stuck open waiting on a mail-order board. We keep common boards, remotes, and safety-edge components ready to go, so a failed FAAC hydraulic pump or a dead Linear receiver usually gets fixed in one visit. Our Gate Parts & Welding team handles both residential and commercial hardware, and we’re certified on nine major brands.
Common Gate Parts & Welding Problems We See in The Bronx Homes
- Rust-seized hinge pins on courtyard gates. Decades of Bronx road salt and freeze-thaw moisture wick into the hinge barrel and seize the pin. We cut the old barrels out and weld in new ones matched to the 1940s post spacing.
- Gate posts heaving out of plumb every winter. Sidewalk-adjacent concrete shifts when temperatures cross 32°F over and over. The post moves, the gate binds, and the latch stops lining up.
- Commercial roll-down operators failing in clusters along Westchester Avenue. Many of these units are original 1990s or early-2000s installs that are now hitting end-of-life simultaneously. We see the same motor and spring failures block to block.
- Shared driveway slide gates with burned-out rollers. Tight lot lines and narrow building entries mean sliding gates are everywhere in The Bronx. Heavy panels wear roller bearings fast, and a seized roller takes the chain or belt with it.
Pricing for Gate Parts & Welding in The Bronx, NY
A typical hinge replacement in The Bronx runs $180-$340, depending on whether we’re welding in one barrel hinge or cutting out and replacing the full set. Post replacement runs $400-$900 when the post has to be dug out, re-anchored, and mortared back into a brick pier. Custom welding for an ornamental gate panel matching the original Parkchester design runs $350-$850 depending on the size and amount of scrollwork. Rail repair on a sliding gate usually lands between $250 and $600. Every price is quoted and agreed before we start work. No trip charge inside the county. $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
Why The Bronx Is Different for Gate Parts & Welding
Gate Parts & Welding in The Bronx is a different trade than it is across the county line. This borough is defined by multi-family density - the Parkchester complex alone runs thousands of brick apartment units in 10462 - and that means courtyard entry gates and perimeter gates are shared infrastructure managed by co-op boards or building owners, not individual homeowners. The gate that’s failing is rarely a single-family driveway gate. It’s a building gate that two dozen residents walk through, that delivery trucks pass under, that the fire department expects to open. When those gates go down, they go down hard because they work harder.
The original ornamental metal gates of Parkchester are now 80+ years old and were fabricated to non-standard dimensions. Hinge barrels are not interchangeable with modern off-the-shelf parts. The surrounding blocks of 1920s-1940s attached brick rowhouses have gate posts mortared directly into brick piers that have spalled and shifted over decades. Re-anchoring those posts isn’t an add-on. It’s routine. And the repeated freeze-thaw cycles - temperatures crossing 32°F dozens of times each winter - cause sidewalk-adjacent concrete to heave and lateral-shift the posts. Heavy municipal road salt accelerates oxidation on exposed iron and steel. By late winter, rust-seized hinges and corroded latch mechanisms are the dominant failure mode we see across the borough.
Last month we were called to a gated courtyard off Metropolitan Avenue in Parkchester where the original tubular steel swing gate had sagged so badly it dragged the sidewalk. We cut out the seized hinge barrels, welded new heavy-duty barrel hinges to match the 1940s post spacing, and re-anchored the hinge post into the brick pier with a deeper footing. The gate now swings clean and the loop detector trips reliably for delivery trucks. That’s the kind of repair you can’t do with a parts catalog. You have to weld it, on-site, where the gate lives.
We Also Serve Cities Near The Bronx
We work daily in Morris Park, Parkchester, Van Nest, and East Tremont. If you’re in any of these Bronx neighborhoods - or nearby in the 10462 ZIP - call (877) 610-2993 and we’ll get you on the schedule fast.
Serving The Bronx, NY - Our Local Coverage Area
We’re based in the The Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in The Bronx
Yes, we weld new panels on-site to match the original picket pattern, scrollwork, and pipe dimensions. Parkchester’s original ornamental hardware was fabricated to non-standard dimensions, so we build the replacement to fit the existing opening and match the surrounding panels. Call (877) 610-2993 and send us a photo first. We’ll tell you honestly whether it’s match-fabrication or a repair.
We open up the pier, remove the old post and any loose mortar, and re-set the post into a deeper footing with fresh mortar and new anchors. In The Bronx, this freeze-thaw spalling is the most common reason a courtyard gate starts sagging and binding. We stabilize the pier itself, not just the post, so the repair holds. For a free quote, call (877) 610-2993.
The hinges, and probably the post the hinges are lagged into. A gate sags in the hinge post, not in the middle. Show me the gate closing on its own and I’ll show you where it’s failing. On Bronx shared driveways, the post has usually heaved in sidewalk-adjacent concrete over decades of freeze-thaw cycles. Most of these gates are repaired, not replaced. Call (877) 610-2993 and we’ll inspect it in person.
Yes, we replace rollers, roller carriages, and track plates on sliding gates at apartment building entrances throughout The Bronx. A seized roller will tear up the track and eventually destroy the chain or belt. We usually replace the full roller carriage set rather than one wheel, and we quote that price before the work starts. For an exact quote, call (877) 610-2993.
Yes, all our welding is done on-site. We carry compact welding rigs that fit through standard Bronx gate openings and work inside narrow courtyards, alleys, and side yards. We don’t haul gates away to a remote shop. The repair happens where the gate hangs, which also means less downtime for the building. Call (877) 610-2993 to schedule.
Call Gatewood Fence & Gate for Gate Parts & Welding in The Bronx
If your courtyard gate is dragging the sidewalk, your roll-down operator is grinding, or your brick pier has given up on holding a post, call us at (877) 610-2993. You’ll get a live person - not a voicemail, not a call center. We’ll quote the repair honestly, do the work on-site, and hand you the 90-Day Done Right Promise in writing. Hal Gatewood’s name goes on every invoice, and he’s been at this since 2001. Serving The Bronx with real repair, real welding, and a real person who answers the phone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving The Bronx since 2001.