Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Stoughton
Gate repair in Stoughton, MA typically runs $180-$680 depending on whether we’re realigning a sagging frame, resetting a heaved post, or replacing a dead control board on an older operator. Most repairs on mid-century Stoughton homes are done in a single visit, because Hal carries the common boards, hinges, and weld stock on the truck. If your gate is leaning, grinding, or refusing to open, call (877) 610-2993 and a live person picks up, day or night. We’ve worked the 02072 ZIP long enough to know exactly what these 50-plus-year-old gates do when a Massachusetts winter gets into the footings.
Why Gatewood Fence & Gate Is Stoughton’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and the way he runs the shop hasn’t changed: the name is on the truck, the address is published, and the person who shows up to your driveway in Stoughton is the same person you’ll see at the hardware store next week. That’s the kind of accountability that matters when you’ve already been burned by a phone quote that doubled at the door. We don’t do that. The price we quote before we start is the price on the invoice.
Stoughton customers call us because the math is simple: a gate that sags in the hinge post, not in the middle, needs a post reset and re-shimming, not a whole new gate. A lot of companies would rather sell you that new gate. We’d rather weld, re-set, and re-align what you already have, because in most cases the steel tube and aluminum panel are still good. The problem is underneath them. When Hal quotes a job, he quotes the fix, not the upsell. That’s why Stoughton homeowners who’ve used us once don’t call anyone else when the second gate on the property starts acting up.
Every Gatewood job in Stoughton carries the Gate Repair in Stoughton-specific 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. Not a call center. Not a voicemail. Hal. Around the clock. Our Gate Repair crew works from the Boston operations office, but the service to Stoughton is local – same streets, same weather, same mid-century gate problems, every week.
Our Gate Repair Services in Stoughton
Hinge & Post Repair
This is the most common call we take from Stoughton homeowners, and it’s usually because of what’s under the post, not what’s attached to it. Houses built in the 1950s through the 1970s around Washington Street, Central Street, and the neighborhoods off Park Street often have gate posts set in only 24 to 30 inches of soil. Massachusetts requires a 48-inch frost depth for a reason. When the ground freezes and thaws year after year, that shallow footing heaves, the post rotates, and the gate starts leaning or the latch stops lining up. We dig down, pull the post, pour a proper 48-inch concrete base, and re-hang the gate square. No new gate needed, in most cases.
Gate Realignment
When a Stoughton homeowner tells us the gate has been dragging or the lock won’t engage, the frame has usually racked over time. On older aluminum single-swing gates this is almost always a frost-heave problem, not a hinge problem. We re-align the frame, shim the hinges, re-tension the chains or tracks, and get the gate closing square again. On split-levels off Central Street, we’ve found hinge posts rotated so far out of plumb that the latch missed by two inches every winter. Dig down, reset at 48 inches, re-aligned the frame, and the operator stopped fighting itself the same day.
Automatic Gate Repair
Stoughton has a lot of original 1980s and early 1990s gate operators still in service, and many of them run on control boards that are long out of production. We fix what we can and retrofit what we can’t. If the board itself is dead but the motor and gearbox are sound, we can often match a modern board to the existing arm or slide drive and keep the original housing in place. That saves Stoughton homeowners hundreds over a full operator replacement, and it’s the kind of repair-first call Hal has made for 29 years. The brand you have matters: we service FAAC, BFT, Linear, and Viking units every week across Stoughton, and we stock the common relay boards so we’re not waiting on a parts order to get your gate operating again.
Electric Gate Repair
Snow and road salt are hard on electric gates in southeastern Norfolk County. Moisture gets into the conduit, corrodes connections, and the gate starts blowing fuses or refusing to move when the temperature drops. We trace the circuit, replace burned contacts and failed capacitors, and seal the junction boxes so the next Nor’easter doesn’t do the same damage. If your gate works fine in July but stalls in February, that’s not a mystery. That’s Stoughton’s climate finding a corroded connection, and it’s a fix we make regularly.
Lock Repair
A gate that won’t lock is a gate that doesn’t secure anything. On Stoughton’s older aluminum and chain-link gates, we typically see worn latch catches, seized lock cylinders, and striker plates that have drifted out of line. We repair and re-key these on site. On newer estate gates with mag-locks or electric strikes, we diagnose the solenoid, power supply, and wiring, and we fix what’s actually failed rather than charging you for a new lock assembly you don’t need.
Weld & Rust Repair
Welding on-site is the core of how Hal works. If a bottom rail has rusted through or a hinge plate has stress-cracked on your Stoughton gate, we bring the welder to your driveway and fix the gate where it hangs. We don’t haul it off to a shop for three weeks and leave your driveway open. That matters in a town where the fence and gate are often the only thing separating your yard from Canton Street traffic. Cut out the rot, weld in a fresh section, grind it smooth, and paint it. Done right, done same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stoughton
We service a range of gate openers and operators across Stoughton, including FAAC, BFT, Linear, and Viking. If you’ve got one of these on a driveway gate that’s older than your kids, we can usually source or match the parts. We stock common control boards and relays for the models we see most often on Stoughton’s mid-century homes, which means we can get you running faster than a shop that has to order every component from a distributor. If you call before noon, Hal can usually be on your street the same morning. Every repair we do in Stoughton is backed by the 90-Day Done Right Promise, in writing, on the invoice.
Common Gate Repair Problems We See in Stoughton Homes
- Frost-heaved posts on mid-century homes. Stoughton’s 1950s-1970s tract homes were built before Massachusetts enforced its 48-inch frost-depth requirement for gate footings. We regularly find posts set at 24-30 inches, which means every freeze-thaw cycle works the post loose and racks the gate frame.
- Nor’easter snow-equipment damage. With 45-50 inches of snow a year, driveway gates in Stoughton take repeated glancing blows from plow blades and snowblowers. Bent bottom rails, knocked-out hinge pins, and jammed operators are the predictable result along Park Street, Central Street, and every side street in 02072.
- Old control boards that won’t talk to new remotes. Many Stoughton gates still run on original 1980s circuit boards. When those boards die, you don’t always need a whole new operator. We can often retrofit a modern board into the old housing and save you the cost of a full unit.
- Cracked brick pillars near Stoughton Center. On the older streets around Stoughton Center, gates are often hung between brick or poured-concrete pillars from the 1940s-1960s. Frost heave cracks those piers at the base, and a hinge swap alone won’t fix anything until the pillar is reset. That’s a two-trade job, and we can coordinate the mason work so the gate is re-hung the same week.
Pricing for Gate Repair in Stoughton, MA
Here’s what Stoughton homeowners can expect to pay for common repairs. A hinge re-shim and realignment on a single-swing aluminum gate runs $180-$320. Resetting a heaved post with a proper 48-inch concrete footing runs $420-$680 for a single post, including hauling off the old concrete. Replacing a control board on an older FAAC or BFT operator runs $260-$520 depending on the board. Weld and rust repair on a bottom rail or hinge plate runs $220-$420. For broken brick pillars near Stoughton Center, the masonry reset adds $600-$1,200 depending on pillar size and access. These are real numbers for this market, not phone estimates that change when the truck pulls up. We quote the job, you approve it, and that’s the price. Take $40 off any repair over $200, get a free second opinion on any written estimate, or ask about the permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Stoughton
If your gate is in Canton, Sharon, Randolph, or Holbrook, the same crew and the same equipment make the drive every week. We know those streets the way we know Stoughton’s, and the same 90-Day Done Right Promise applies on every job. We coordinate scheduling from our Boston operations office, and the service area follows the local roads we already know.
Serving Stoughton, MA - Our Local Coverage Area
We’re based in the Stoughton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Stoughton
Because the post is heaving, not the hinges. Most Stoughton homes built between the 1950s and 1970s have gate posts set at only 24-30 inches, well above the 48-inch frost line. Every winter the ground freezes under the post, lifts it a fraction, and the gate frame racks out of square. Tightening hinge bolts is maintenance, not a fix. We reset the post in a proper 48-inch concrete footing and the sag stops. Call (877) 610-2993 for a free inspection and a written quote.
In most cases, yes, we can replace just the board. If the motor and gearbox are still sound, a modern retrofit board can be matched to the existing housing and drive arm. This typically saves Stoughton homeowners $300-$600 over a full operator swap on brands like FAAC, BFT, Linear, and Viking. Hal will test the motor first and tell you honestly if the board replacement is worth doing or if the whole unit is nearing the end. Call (877) 610-2993 and we’ll come out and look at what you have.
We can, but it’s a two-trade job. The pillar needs to be reset by a mason before the gate can be re-hung straight, because the crack means the pier itself has shifted from frost heave. We coordinate the masonry and the gate work so the pillar is solid before the hinges are re-attached. Expect the masonry reset to add $600-$1,200 depending on pillar size. This is a common repair on the older streets around Stoughton Center, and waiting to fix it only makes the crack worse. Call (877) 610-2993 for a free on-site assessment.
Cold-weather reversing on automatic swing gates in Stoughton usually comes down to two things: moisture-damaged connections causing resistance the operator’s safety sensors read as an obstacle, or a frame that’s icing up at the hinge and binding the swing. Stoughton gets 45-50 inches of snow a year, and road salt plus freeze-thaw cycling corrodes junction boxes and terminals. We trace the circuit, replace the corroded connections, and re-test the safety system. If the operator reverses because the gate frame is binding from frost-cocked hinges, that’s a realignment, not an electronics problem. Call (877) 610-2993 and describe what the gate does; we’ll tell you over the phone what’s most likely going on.
Yes. Solar gate openers present a specific challenge in Stoughton because panel orientation and winter shade matter a lot here. A panel that worked fine in July can fall to half output in December when the sun sits lower and snow covers the array. We check panel angle, wiring, battery condition, and the operator’s cold-weather amp draw as a complete system. Sometimes the fix is a bracket adjustment and a battery replacement; sometimes the panel needs to be relocated entirely. Hal carries the common solar operators we see across Stoughton’s residential properties, and we’re set up to test and replace batteries on-site. Call (877) 610-2993 with the make and model of your operator and we’ll bring the right parts.
Get Your Stoughton Gate Fixed Today
If your gate is leaning, grinding, or not opening, don’t wait for the next hard freeze to finish the job. Call (877) 610-2993 and a live person answers, 24 hours a day, 7 days a week. We’ll get you on the schedule for a time that works, show up when we say we will, and tell you exactly what the repair costs before any work starts. Free estimates in Stoughton, no trip charge inside the county, and every job backed by the 90-Day Done Right Promise in writing. (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Stoughton and the surrounding area since 2001.