Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Stoughton
If you live in Stoughton and your gate sags, won’t latch, or has a bottom rail bent from a snowplow clip, here’s what you need to know: most gate failures in 02072 trace back to the hinge post, not the gate itself. Frost heave works on shallow mid-century footings every winter, rotating posts out of plumb and pulling hinges out of alignment. We fix it right by re-setting the post to a proper 48-inch depth, welding what’s failed, and realigning the gate so it closes the way it did when it was first hung. Call (877) 610-2993 and Hal will answer.
Why Gatewood Fence & Gate Is Stoughton’s Preferred Gate Parts & Welding Company
Hal Gatewood has been owner-operating Gatewood Fence & Gate since 2001, and his name is on the shop and every invoice. That matters in Stoughton, where a lot of the gates we see were put in during the town’s big 1950s-1970s build-out and are now failing in predictable, fixable ways. We don’t haul your gate to a shop. We weld on site in your driveway, which keeps the work visible, honest, and fast. No national outfit, no dispatch queue. The person who shows up is the person whose reputation is on the line.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. Stoughton homeowners have also taken advantage of our $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. We quote the price before any work starts, and that’s the price. Plain as that.
Our Gate Parts & Welding Services in Stoughton
We cover the full range of Gate Parts & Welding work that Stoughton gates actually need. The four below account for most of what we do across 02072.
Hinge Replacement
On Stoughton’s 50-year-old chain-link and aluminum gates, the hinges are usually the first thing to go. The original galvanized hardware corrodes at the pin, and once a hinge starts to bind, the gate’s full weight transfers to the post in the wrong direction, accelerating the sag. We stock heavy-duty replacement hinges for FAAC, BFT, and Linear systems and weld new hinge barrels on site so you’re not waiting on a part from three states away.
Post Replacement
This is the dominant repair call in Stoughton, and the reason is simple: most mid-century gate posts were set 24 to 36 inches deep, nowhere near the 48-inch frost-depth standard Massachusetts now requires. Every freeze-thaw cycle heaves the shallow footing, and after enough winters the post rotates out of plumb. We break out the old concrete, set a new post to proper depth, and re-hang the gate so it clears the ground and latches square.
Rail Repair
Bottom rails on Stoughton driveway gates take a beating. Snowplows, snowblowers, and the occasional teenager learning to back up all make glancing contact, and the galvanized rail eventually cracks at the weld or bends at the hinge. We straighten what’s straightenable and weld in new rail sections where the metal has fatigued. If the gate is 14 feet of chain-link like the one we rebuilt off Central Street, we replace the rail, not just patch it, so the gate doesn’t turn into a springboard.
Custom Welding
Some gates don’t need a part, they need a repair that doesn’t exist in a catalog. A cracked hinge mount, a broken latch bracket, a gate that needs to be widened by 6 inches because the new trash company’s truck can’t clear the old opening. Hal welds custom aluminum and steel work on the spot, and because he’s been doing this since before half of Stoughton’s gates were even failing, he’ll tell you honestly whether welding or replacing makes more sense.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stoughton
We’re certified to service nine major gate brands, including FAAC, BFT, and Linear operators that show up all over Stoughton’s mid-century homes. We keep common hinges, rollers, and latch components in the truck so most Stoughton repairs happen same visit. If your operator is a Viking or a Ghost Controls, we service those too. The point is this: when your gate needs parts, we usually have them, and when we don’t, we know exactly what to order without guessing.
Common Gate Parts & Welding Problems We See in Stoughton Homes
Stoughton’s housing stock and climate combine in specific ways that produce specific gate failures. Here’s what we see most:
- Freeze-thaw post heave on 1950s-1970s posts. Shallow footings lift and settle every winter, rotating hinge posts and pulling gates out of alignment. This is the single most common Stoughton repair call we answer.
- Corroded hinges and rails on aging galvanized chain-link. Fifty years of New England winters leaves original hardware brittle. A glancing hit from a snow-removal pass snaps a corroded bottom rail or shears a hinge pin.
- Cracked brick pillars near Stoughton Center. Older properties around the town center often hang gates between 1940s-1960s brick or poured-concrete pillars. Frost heave cracks those pillars at the base, and a “simple hinge swap” turns into a two-trade job with masonry repair.
- Latch misalignment after ground movement. When the post heaves even an inch, the latch bar no longer lines up with the keeper. You can muscle the gate closed for a while, but the real fix is post re-setting, not latch adjustment.
Pricing for Gate Parts & Welding in Stoughton, MA
Here are straight numbers for Stoughton’s market, not vague ranges. Hinge replacement on a standard single-swing gate typically runs $180-$340 including parts and labor. Post replacement, including breaking out old concrete and setting to Massachusetts’ 48-inch frost-depth standard, runs $450-$850 depending on post size and whether the gate is chain-link, aluminum, or steel. Rail repair runs $150-$400 depending on the length of rail and whether we’re straightening or welding in new material. Custom welding is quoted by the job, not the hour, so you know the price before we strike an arc. Every quote is free, it’s the price that gets written down, and the 90-Day Done Right Promise covers it.
We Also Serve Cities Near Stoughton
While this page is written for Stoughton, our crew regularly handles Gate Parts & Welding in Stoughton and the surrounding towns. If you’re in Canton, Sharon, Randolph, or Holbrook, you’re inside our county service area, which means no trip charge and the same 24/7 live answer. Same crew, same guarantee.
Serving Stoughton, MA - Our Local Coverage Area
We’re based in the Stoughton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Stoughton
Because the original posts were almost never set to Massachusetts’ 48-inch frost-depth requirement, and 50-plus years of freeze-thaw cycling has worked the shallow footings loose. The post rotates out of plumb, the hinges bind, and the gate sags at the latch end. The fix is post re-setting and hinge realignment, not just tightening bolts. Call (877) 610-2993 and we’ll tell you if your post is the problem.
Usually the crack means the footing under the pillar has shifted, so welding or patching the brick alone won’t hold. What works is re-setting the footing, repairing the masonry, and then re-hanging the gate with new hinge mounts. We coordinate with a mason for the brickwork so you don’t have to find one. Call for a free on-site look.
For heavy chain-link gates, a weld-on heavy-duty hinge with a greasable pin holds up far better than the original bolt-on hardware, especially where the post has already shifted once. We also set the post deeper when replacement is needed, because the hinge is only as good as the footing under it. Estimates are free and the price is quoted before work starts.
Not necessarily. A bent or cracked bottom rail is a structural repair, not an operator problem. But if the gate has been dragging for months, the operator motor may have been working harder than it should, and that’s worth checking. We’ll tell you honestly if your existing operator is still fine. Call (877) 610-2993 for an honest read.
Nor’easter winds and drifting snow push against the gate and can knock a hinge or bottom rail out of alignment, which trips the operator’s safety sensors. Once the gate binds, the operator refuses to close because it thinks something is in the way. The fix is realigning the gate and repairing whatever the storm bent. Call us and we’ll get it closing again.
Call Gatewood Fence & Gate for Gate Parts & Welding in Stoughton
If your Stoughton gate is sagging, stuck, or held together with a bungee cord and hope, call (877) 610-2993. A live person answers, day or night. Hal will give you a straight answer, a written quote, and the 90-Day Done Right Promise on the work. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Stoughton since 2001.