Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across South Highpoint
Gate repair in South Highpoint usually runs between $140 and $480 depending on whether we’re replacing hinge hardware, fixing a fried control board, or re-welding a rusted frame. Most calls we handle same day or next morning, and you’ll get a live person on the phone at (877) 610-2993 any hour. If your swing gate is dragging, your slide gate is grinding, or your keypad stopped answering after last night’s storm, we’ll find it and fix it right there in your driveway.
We know South Highpoint’s houses. Concrete-block ranches from the 1960s and 1970s with gates added in the 1990s, mild-steel frames sweating under salt air, operator boards that take a hit every time lightning walks across the Pinellas peninsula. That’s what we work on, and we’ve been doing it since long before the current wave of failures hit.
Why Gatewood Fence & Gate Is South Highpoint’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. He lives in the region and our Gate Repair crew works South Highpoint regularly, from the streets off 28th Avenue North down to the neighborhoods between 62nd and 66th. When we say we’ll be there, we show up. Not a call center, not a subcontractor lottery. The person answering the phone knows gates, and the person who shows up answers to Hal.
South Highpoint customers keep calling us back because we repair before we replace. Other companies look at a corroded hinge post and quote a full gate swap. We grind out the rust, weld new steel, set a galvanized post, and get your original gate working for a fraction of replacement cost. That’s not stubbornness; it’s math. A $2,800 gate replacement rarely beats a $360 post repair, and we’ll tell you that even when it means less work for us.
Our work here carries the 90-Day Done Right Promise, in writing, every job. If something’s off after we leave, one call brings us back. That’s how an owner-operated company works in a place like South Highpoint, where your neighbor knows your gate better than your insurance agent does.
Our Gate Repair Services in South Highpoint
Electric Gate Repair
Electric gates in South Highpoint take a beating from June through September. The Tampa Bay region gets some of the most frequent lightning in North America, and a strike doesn’t need to hit your gate; a surge through the power line or the loop detector wiring is enough to fry a control board or keypad on a 1990s operator. We diagnose the board, replace capacitors and relays where possible, and install dedicated lightning arrestors so the next storm doesn’t do it again.

Automatic Gate Repair
Automatic gate systems here are mostly first-generation operators bolted onto 25-to-35-year-old gates. That means the motor may be fine while the limit switches are corroded, or the rack and pinion is skipping because the post has shifted. We service LiftMaster, Viking, DoorKing, and Elite operators in South Highpoint, and we keep common boards and limit switches on the truck so we can usually finish in a single trip.

Hinge & Post Repair
This is the South Highpoint specialty, because this is where salt air does its worst work. Mild-steel hinge posts set in concrete forty years ago rust at ground level where moisture wicks up from the footing. The gate sags, the operator fights it, and eventually the rack jumps teeth or the motor burns out. We dig out the old post, set a galvanized replacement in fresh concrete, and hang the gate square. Fix the post first, and the rest usually holds.

Gate Realignment
Sometimes the post is sound and the panel has simply settled. South Highpoint’s sandy soils shift with every wet season and dry season cycle, and gates that were perfectly level in March can drag by August. We adjust hinges, re-align the rack, re-set the operator travel limits, and get the gate moving like it did when it was new. Realignment is one of the cheapest fixes we do and it prevents a lot of expensive motor replacements.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Highpoint
We repair and maintain operators from Viking, Ghost Controls, DoorKing, and Elite every week in South Highpoint. These are the brands most often found on 1990s driveway gates in the 33760 ZIP, and we’ve learned their failure points over nearly three decades. We stock control boards, limit switches, keypads, and remote receivers for these units locally, which means faster turnarounds and fewer return trips. When parts have been discontinued we source factory-compatible replacements, not whatever fits off the shelf.
Common Gate Repair Problems We See in South Highpoint Homes
- Rusted hinge post footings. On 1960s and 1970s concrete-block ranches, the original mild-steel post corrodes at ground level until the gate sags and the operator’s rack and pinion jumps teeth. This is the most common failure we find in South Highpoint, and it’s almost always repairable without replacing the gate.
- Fried control boards after summer storms. The daily lightning cycle from June through September surges into gate operators that weren’t wired with dedicated arrestors. A single storm can knock out a DoorKing or LiftMaster board permanently.
- Seized hinges and latches. Salt-laden humidity off Tampa Bay keeps working at mild steel even inland. Hinges that were never greased annually seize up, and latch releases corrode until the gate won’t open from outside.
- Corroded loop detector contacts. The vehicle detection loops buried in South Highpoint driveways are well past their expected lifespan, and corroded contacts read false or stop reading entirely. The gate either won’t open for your car or opens for nothing at all.
Pricing for Gate Repair in South Highpoint, FL
A hinge tune-up and lubrication in South Highpoint typically runs $140 to $190. Replacing a corroded hinge post with a galvanized post set in concrete runs $320 to $480. A control board replacement, including a new lightning arrestor, usually lands between $260 and $420 depending on the operator brand. Weld and rust repair on a mild-steel frame averages $180 to $350 per section depending on how far the corrosion has spread. Every price is quoted and agreed before we touch a tool. You get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans always get 10% off. Call (877) 610-2993 and we’ll talk through it.
We Also Serve Cities Near South Highpoint
Our Gate Repair in South Highpoint service area reaches nearby communities too. If you’re in Pinellas Park, Clearwater, Largo, or Dunedin, the same crew and the same 90-Day Done Right Promise applies. Same phone number, same live person answering.
Serving South Highpoint, FL - Our Local Coverage Area
We’re based in the South Highpoint area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in South Highpoint
The panel isn’t the problem. The post is. South Highpoint’s original gate posts from the 1990s are mild steel set in concrete, and decades of salt-laden humidity wicking up from the footing rusts the post at ground level. The gate drops, the operator strains, and the rack and pinion starts skipping. We fix the post, not the panel. Call (877) 610-2993 and we’ll inspect it.
Lightning arrestors should be checked every year and replaced every three to five years, or immediately after any close strike that caused flickering or damage. In South Highpoint’s storm season, operators without dedicated surge protection lose control boards regularly. We install arrestors on every motor repair we do here. Call (877) 610-2993 for an inspection.
Yes, and that’s what we do most often in South Highpoint. The steel frame can be ground, welded, and re-coated. The operator can be refurbished with new limit switches, a surge arrestor, and recoated wiring. A $400 rehabilitation often buys five to ten more years. We only recommend replacement when the structure itself is unsafe. Call (877) 610-2993 for a free estimate.
Track hardware fails first. Salt air corrodes the rollers, the guide brackets, and the chain or rack long before a sealed motor gives out. The motor keeps pushing against corroded hardware until it overheats and burns. In South Highpoint we replace track rollers and re-align the rack before the motor becomes the next casualty. Call (877) 610-2993 and we’ll check yours.
Yes. Keypads are wired directly into the operator’s control board, and without a dedicated surge arrestor on the board they absorb the same surge that kills the board. It’s the same reason your neighbor’s keypad works while yours doesn’t; theirs has arrestor protection. We install arrestors and replace damaged keypads on every South Highpoint call where we find this pattern. Call (877) 610-2993 to get it fixed before the next storm.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving South Highpoint since 2001.





Before
After
Before
After
Before
After