Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across South Highpoint
Gate hinges seize, posts rot at the footing, and control boards fry when lightning walks across the Pinellas Peninsula. In South Highpoint, we fix all three, usually in one visit, and we weld on site so the gate never leaves your driveway. Hal Gatewood has repaired gates in 33760 long enough to know which corners on 62nd Avenue North flood first and which 1980s operators are worth saving. If your gate is sagging, sticking, or dead after a storm, call (877) 610-2993 and a live person answers. Not a voicemail, not a recording.
Why Gatewood Fence & Gate Is South Highpoint’s Preferred Gate Parts & Welding Company
Most companies want to replace your gate. We want to weld it back together. Hal has been owner-operated since 2001, and his name is on the shop and every invoice. Around South Highpoint, that matters because the housing stock has a specific problem: gates added in the 1990s to modest ranch homes were never built for salt-laden humidity and daily summer lightning. A national franchise that flies in a salesman doesn’t know that. We do.
Our Gate Parts & Welding crew works on the gate where it stands, in your driveway off 62nd Avenue North or 60th Street North, not hauled off to some shop two counties away. When a hinge post rots at the base, we dig it out, set a new one, and weld the hinge back square. When a roller grinds to a stop, we replace the bearing instead of selling you a whole new panel. The 90-Day Done Right Promise is stamped in writing on every job. If it’s not right, one call brings Hal back. No runaround.
We answer the phone 24 hours a day, 7 days a week. A real person, local to South Florida, not a call center three states away. For gate parts and welding in South Highpoint, you get someone who knows that the afternoon storm cycle from June through September is when half the calls come in.
Our Gate Parts & Welding Services in South Highpoint
Hinge Replacement
South Highpoint’s concrete-block ranch homes sit close enough to Tampa Bay that salt humidity gets into mild-steel hinges and never leaves. We see hinges so seized that the gate has worn a crescent into the concrete driveway. Hinge replacement here means cutting off the old hardware, welding on new heavy-duty hinges, and setting the gate so it swings true. A hinge replacement in South Highpoint typically runs $180 to $340, including the hardware and welding. If the hinge post has rotted too, that’s a separate fix and we’ll tell you before we start, not after.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. In South Highpoint, the original posts on many 1980s and 1990s gates were set shallow, sometimes in soil that holds water for days after a storm. When the post rots below grade, the whole gate leans. We dig out the old concrete, set a new steel post deep enough to survive, and weld the hinges back on. Post replacement runs $250 to $500 depending on depth and whether we’re working around driveway pavers.
Rail Repair
Wide driveway gates on South Highpoint’s larger lots put stress on rails, especially swing gates that get caught by afternoon winds off the bay. A cracked rail will eventually snap under its own weight. We grind out the crack, weld in a reinforcing plate, and re-hang the gate. Rail repair typically runs $150 to $300 in South Highpoint, and we’ll quote it before any torch is lit.
Custom Welding
Sometimes the part doesn’t exist anymore. A 1993 gate latch assembly for a brand that went out of business in 2008? We fabricate it. Hal welds a new strike plate, builds up a worn roller bracket, or extends a frame for a gate that was always too short for the opening. Custom welding in South Highpoint runs $100 to $250 an hour, and for most repairs we’re done in one to two hours. On a long driveway off 62nd Avenue North, our tech replaced the corroded hinge posts on a 1990s swing gate that had sagged into the dirt. The LiftMaster operator’s control board was also fried from a storm surge, so we installed a lightning arrestor before remounting the gate and re-welding the latch strike.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Highpoint
Hal is certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around South Highpoint, we see plenty of FAAC and BFT operators on older homes, plus Linear units that have been through at least a dozen storm seasons. We keep common parts on the truck - control boards, limit switches, hinges, rollers, and latch hardware - so we’re not ordering from a catalog and coming back next week. If your gate opener is from FAAC, BFT, or Linear, we can service it same day in most cases.
Common Gate Parts & Welding Problems We See in South Highpoint Homes
- Corroded hinges on 25 to 35 year old gates. The salt-laden humidity that comes off Tampa Bay and the Gulf oxidizes mild-steel hinges fast in 33760. Hinges seize, the gate drags, and eventually the post footing gives out from the constant stress.
- Fried control boards from daily lightning. The Tampa Bay area is among the most lightning-struck regions in North America, and operators wired without surge suppression routinely lose control boards every rainy season. In South Highpoint’s 33760 ZIP, this is the number one call from June through September.
- Entry-level operators on heavy farm-style gates. Some homes in South Highpoint have wide driveway gates that were never matched to the right operator. The rack and pinion gears wear out prematurely, and eventually the gate stalls halfway open.
- Latch strikes out of alignment after post shift. When a hinge post shifts even half an inch, the latch no longer catches. We see this on just about every sagging gate in South Highpoint, and the fix is almost always resetting the post, not buying a new latch.
Pricing for Gate Parts & Welding in South Highpoint, FL
Here’s what gate parts and welding work actually costs in South Highpoint. Hinge replacement runs $180 to $340. Post replacement runs $250 to $500. Rail repair runs $150 to $300. Custom welding runs $100 to $250 an hour. A lightning arrestor installed on an existing operator runs $75 to $150, and it’s the cheapest insurance you can buy for a gate motor in this ZIP. Every price is quoted and agreed before any work starts, and there’s no trip charge inside the county. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10 percent discount. Call (877) 610-2993 for a free estimate, and if you have a written estimate from another company, Hal will give you a free second opinion.
We Also Serve Cities Near South Highpoint
While this page focuses on South Highpoint, we regularly work in Pinellas Park, Clearwater, Largo, and Dunedin. The same crew, the same 90-Day Done Right Promise, and the same live person on the phone whichever side of 62nd Avenue North you live on.
Serving South Highpoint, FL - Our Local Coverage Area
We’re based in the South Highpoint area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in South Highpoint
Because 33760 sits in one of the most lightning-active corridors in North America, and most older gate operators around South Highpoint were installed without dedicated surge suppression. A single ground strike a quarter mile away can send a spike through the power line and fry the control board. The fix is a lightning arrestor wired directly into the operator, which costs $75 to $150 installed. We recommend it on just about every motor repair call in this ZIP. Call (877) 610-2993 and we’ll add one to your repair.
Nine times out of ten, the hinge posts are the problem. A gate sags at the post, not in the middle. In South Highpoint, original posts from the 1980s and 1990s were often set too shallow and are now rotting below grade. We replace the posts, re-weld the hinges, and the same panel hangs straight again. You usually don’t need a new panel at all. A quick call to (877) 610-2993 gets someone out to look at it.
Yes. We weld custom slide gates on site for wide driveways and acreage lots around South Highpoint. The key is matching the gate to the operator, not just hanging a heavier gate on a residential motor that can’t pull it. We’ll measure your opening, weld the frame to spec, and set the roller track so it runs smooth. Free measure and written quote before you spend a dollar. Call (877) 610-2993.
Depends on the operator, but in South Highpoint we say repair first unless the motor windings are shot. A breaker trip is often a failing capacitor, a corroded control board, or a seized hinge gear pulling too many amps. We can replace those parts for $150 to $300 and get another five to ten years from the unit. If it’s genuinely dead, we’ll tell you straight and quote a replacement without any pressure. Estimates are free.
If your gate operator can auto-close and you have people, pets, or children on the property, yes. A photocell detects anything in the gate’s path and stops the close cycle. It’s a few hundred dollars installed, and on an older South Highpoint gate it’s the difference between a functioning gate and a lawsuit waiting to happen. We install and align photocells on all major brands, including FAAC, BFT, and Linear. Call (877) 610-2993 for an exact quote.
Gate problems in South Highpoint don’t fix themselves, but they do get more expensive the longer you wait. The sagging hinge post becomes a snapped rail. The sticky roller becomes a burned motor. The next thunderstorm is coming, and if your operator isn’t protected, you’ll be buying the same board twice. Call (877) 610-2993 and tell us what the gate is doing. We’ll tell you what it needs and what it costs before we touch it. That’s how Hal has worked since 2001, and the name’s still on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving South Highpoint, FL since 2001.