Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Snellville
If your gate in Snellville is sagging, grinding, or refusing to open, the fix usually comes down to one thing most companies never check: the post under the red clay. We service both 30039 and 30078, and we’ll be straight with you about what’s actually failing before we touch a wrench. Gate repair in Snellville runs $180-$340 for most hinge and alignment work, and we quote the price before any work starts. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Snellville’s Preferred Gate Repair Company
Hal Gatewood has been running this shop since 2001, and he put his name on it for a reason. When a Snellville homeowner calls, they’re not getting a rotating cast of strangers. They get Hal, or someone from his crew who has been doing this long enough to know the difference between a bad motor and a bad footing. The shop’s address is published, the license is on the invoice, and the 90-Day Done Right Promise is stamped in writing on every job. If it’s not right, one call brings him back. No runaround.
We’re not a call center three states away. The person who answers the phone at 2 a.m. is the same person who will show up at your gate. Snellville homeowners in their 50s and 60s have told us they’re tired of quoting games from national outfits. That’s why our price is agreed before the work starts, and why we offer a free second opinion on any written estimate you’ve already received. Bring us the paperwork and we’ll tell you if the other guy is selling you a motor you don’t need.
Serving Snellville means understanding what these subdivisions were built on. Snellville’s boom years put hundreds of HOA communities on Georgia red clay, and that clay moves. A gate that looks like it has an operator problem often has a post problem underneath. We start there, because fixing the panel without the post means you’ll fix it twice. We also carry a permanent 10% discount for seniors and veterans, and there’s no trip charge inside the county. That’s not a promo. It’s just how we work.
Our Gate Repair Services in Snellville
Every gate we touch gets looked at the way a person would look at it, not a checklist. Here’s what we handle most in Snellville, and what usually turns out to be the real story.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. In Snellville’s 30078 ZIP, it’s common to find subdivision entrance gate posts tilted one to two inches out of plumb from clay soil expansion. We cut out the failed shallow footing, pour a wider concrete base, and re-set the post before touching the hinge. If you skip the footing, the next wet-dry season puts you right back where you started.
Gate Realignment
Georgia’s humid summers rust steel hinges and fasteners, and the wet-dry cycle keeps working on the soil. That combination drops gate leaves out of alignment, and they drag or bind. We realign the gate and correct what caused it, whether that’s a hinge that needs rebuilding or a post that needs sistering in place. Realignment in Snellville typically runs $180-$280 depending on gate weight and how far out it’s drifted.
Weld & Rust Repair
Ornamental iron gates installed during the 1980s and 1990s subdivision boom are now 20-35 years old, and the humid subtropical summers have taken their toll. We weld on site, in your driveway, so the gate never has to be hauled off. When a hinge bracket shears or a weld cracks at the leaf, a proper repair beats a replacement panel every time, and it keeps the gate’s original look intact.
Electric Gate Repair
Operators fail for reasons that have nothing to do with the motor itself. If your gate is dragging because the post shifted, the operator burns out trying to move extra resistance. We service Linear, Viking, Ghost Controls, and DoorKing operators, and we look at the whole gate before deciding what’s actually broken. A control board replacement in Snellville typically lands between $240 and $420, but we’ll tell you if your problem is mechanical instead.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Snellville
We’re certified on nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters when a 25-year-old HOA gate has an obsolete board and someone has to know whether it can be retrofitted or needs to go. We carry common parts for Snellville customers so we’re not waiting on a warehouse in another state when your gate is stuck open. If parts need ordering, we tell you upfront and keep you posted. Nobody likes surprises at the invoice.
Common Gate Repair Problems We See in Snellville Homes
- Clay-driven post heave and tilt. The red clay under Snellville expands and contracts with every wet and dry season. Posts that were set in shallow footings 20 years ago are now tilting, and that tilt is what throws the gate out of alignment. Hinge and motor work alone never fixes it for long.
- Rusted steel hinges and fasteners. Hot, wet summers mean rust. When a steel hinge shears under the weight of an ornamental iron gate, the leaf drops hard onto the operator. We see this regularly on gates installed in the mid-80s through the early 2000s along Wisteria Drive and around the Summit Chase area.
- Obsolete control boards failing after ice storms. Northeast Gwinnett County gets more winter ice than Atlanta proper. Ice loading on gate arms, like the January 2014 event, strips drive gears and cracks circuit boards. A 30-year-old board that was hanging on has a way of dying right after a freeze.
- Sagging gates on HOA entrance posts. Solid ornamental iron swing gates are heavy, and time plus soil movement works against them. We’ve seen gates in 30078 dragging across the drive while the operator still cycles fine. The motor wasn’t the problem. The post was.
Pricing for Gate Repair in Snellville, GA
Here’s what Snellville homeowners should expect to pay, based on what we see in this market:
| Repair Type | Typical Snellville Range |
|---|---|
| Gate Realignment | $180 - $280 |
| Hinge & Post Repair | $240 - $420 |
| Weld & Rust Repair | $150 - $350 |
| Electric Gate / Control Board Repair | $240 - $420 |
| Full Operator Replacement | $650 - $1,100+ |
Heavier gates, rusted-through sections, and deep post footings all push toward the upper end. You’ll get a written quote before any work begins, and the number on that paper is the number you pay. We offer $40 off any repair over $200. A free second opinion on any written estimate is yours for the asking. Call (877) 610-2993 for an exact quote on your gate.
Here’s the honest part: sometimes a retrofit costs more than it saves. If your board is obsolete, the board itself is gone, and retrofitting safety edges and a new loop detector onto a 30-year-old swing gate can cost more than replacing the operator. We’ll lay out both numbers and let you decide. We’d rather lose a job than sell you something that won’t hold up.
We Also Serve Cities Near Snellville
Snellville is home base for a lot of our work, but we regularly run service out to homeowners in Lilburn, Lawrenceville, Stone Mountain, and Mountain Park. If you’re in one of those cities and your gate is giving you trouble, call the same number and Hal’s crew will get out to you. Our full Gate Repair service area covers all of northeast Gwinnett and into DeKalb.
Serving Snellville, GA - Our Local Coverage Area
We’re based in the Snellville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Snellville
The answer is Georgia’s expansive red clay, which contracts during dry spells and swells during wet seasons. Many posts in Snellville’s 30078 and 30039 subdivisions were set in footings that were too shallow for that movement. The real repair is cutting out the old footing and re-setting the post in a wider concrete base, usually 24 inches square. Then we correct the alignment. Call (877) 610-2993 and we’ll tell you if your post is the culprit before you spend a dime.
No, not until someone checks the post and hinges. In our experience across Snellville, a sagging gate with a running motor is almost always a structural problem, not an operator problem. We lift the gate, re-set the post if needed, fix the sag, and the motor usually keeps working. Replacing the operator first is throwing money at the wrong part. We give free estimates, and the price is agreed before any work starts.
Sometimes yes, sometimes the math says no. If the board still works and the wiring is intact, we can often add photo eyes and safety edges without replacing everything, typically in the $240-$420 range for the board-side work. But if the board is already failing, retrofitting costs more than a full operator replacement. We’ll show you the actual numbers side by side. Call (877) 610-2993 and bring us what you have; we’ll give it to you straight.
Ice loading is the reason. Northeast Gwinnett County gets more freezing events than Atlanta proper, and when ice builds up on a gate arm, the operator fights it until gears strip or the board gives out. We saw a wave of this after the January 2014 event. The fix usually means replacing stripped gears or a cracked board, and sometimes adjusting the operator’s force settings so it stops fighting instead of destroying itself. We’re a phone call away: (877) 610-2993.
Look at the post, not the hinge. If the post leans one to two inches out of plumb, a hinge adjustment is a band-aid. Our crew got called to a 1990s HOA community in the 30078 ZIP because a solid ornamental iron swing gate had sagged so badly it dragged across the drive. The LiftMaster operator was still cycling, but the hinge post had pulled nearly two inches out of plumb in the red clay. We lifted the gate, cut out the failed shallow footing, installed a new 24-inch-square footing, and re-set the post in concrete before correcting the sag and re-setting the loop detector. No new motor required, and the gate has held plumb through two wet winters. If you’re not sure, we’ll come look. The estimate costs you nothing.
Contact Us for Gate Repair in Snellville
If your gate in Snellville is sagging, stuck, or making a sound it didn’t make last month, call (877) 610-2993. A live person picks up, 24/7. We’ll get you scheduled, show up when we say we will, and hand you a written quote before any work begins. No trip charge inside the county, free second opinions, and a permanent 10% discount for seniors and veterans. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Snellville since 2001.