Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Shaw Heights
If your gate is dragging, sagging, or won’t open at all, here’s the straight answer: most gate repairs in Shaw Heights run between $180 and $450 for hinge, post, and realignment work, and we can usually have someone at your door the same day you call. That price gets quoted before any work starts, in writing, and it doesn’t change when the job’s done. Call (877) 610-2993 and a live person picks up, 24 hours a day, not a voicemail or a menu tree.
The Gate Repair crews at Gatewood Fence & Gate know Shaw Heights well because we work here constantly. Nearly every house in this area went up between the late 1950s and mid-1970s, which means nearly every gate swinging on those fence lines is 50-plus years old. That changes the kind of work it needs and it changes how we approach it. You don’t need a new gate most of the time. You need a hinge post pulled straight again and hardware that hasn’t rust-welded itself solid.
Why Gatewood Fence & Gate Is Shaw Heights’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, and his address is published where anyone can look it up. He has been fixing gates since 2001. When you call about a Shaw Heights gate that won’t close, the person who answers isn’t a call center operator reading from a script three states over. It’s someone who actually knows what a 1960s tubular steel gate in Adams County looks like when the post heaves.
We get called back to Shaw Heights jobs two, three, five years after the first repair because the neighbor saw the truck and wrote the number down. Around here, that’s how business actually works. You want a name you can verify and a face you’ll see again at the grocery store. We understand that’s the whole point. Hal has been doing this for over 29 years, and he’ll tell you himself: a gate sags in the hinge post, not the middle, and that’s where we start.
Every job we do in Shaw Heights carries a written 90-Day Done Right Promise. If it isn’t right, one phone call brings us back. We also show up in uniform, background-checked, and we don’t charge a trip fee inside the county. And if you’ve already got a written estimate from another company, bring it to us. We’ll give you a free second opinion before you spend another dollar.
Our Gate Repair Services in Shaw Heights
Hinge & Post Repair
This is the bread and butter of gate work in Shaw Heights, and it’s the repair that separates a real fix from a temporary one. Adams County has notoriously hard water. Over 50 years, that water rusts galvanized hinge bolts solid, and gates start to bind and drag. You can’t just spray the hinge and call it done. We cut out the seized hardware, sleeve or replace the post top if it’s rotted, and set the gate so it swings without fighting every inch.
Gate Realignment
Every spring we get a wave of calls from Shaw Heights homeowners whose gate swung fine last October and now scrapes the ground or won’t latch. That’s the freeze-thaw cycle at work. The concrete collar around the original steel post cracks, water gets in, freezes, and the post tilts a few degrees. A few degrees at the post is an inch or two at the latch end. We reset the footing, plumb the post, and re-hang the gate so it clears the ground like it used to.
Weld & Rust Repair
Chinook winds on the Front Range can gust over 60 mph, and they hammer old tubular steel gates. After decades of that flex, hairline cracks show up at the welded joints and the operator mount gets loose. We weld on site, right in your driveway. The gate doesn’t get hauled off to a shop. We grind out the rust, reinforce the failed joint, and usually have the gate back in service the same visit. Most of the time, a $90 weld repair outlasts the rest of the frame.
Electric Gate Repair
Automatic gates in Shaw Heights are often retrofits on 50-year-old panels, frequently with the original or second-generation operator. We service FAAC, Linear, and BFT among others. If your opener stopped mid-swing after a wind storm, the usual culprits are a sheared gear on the actuator, a blown control board from a power surge, or a limit switch that got knocked out of position when the wind slammed the gate. Most electric gate repairs in Shaw Heights run $225 to $600 depending on the part, and we’ll show you the failed component before we quote the replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shaw Heights
We carry parts and service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For the older operators common around Shaw Heights, that matters more than you’d think. A 1990s FAAC 400 series is still repairable if you have the right limit switch on the truck. We keep the common boards, remotes, and edge sensors stocked so we don’t finish a diagnostic and then tell you to wait a week on a part. When the part is on the shelf, the fix happens today.
Common Gate Repair Problems We See in Shaw Heights Homes
- Dragging gates that worked fine last fall. Every March and April, the same call: “It was fine in November.” The post heeled over the winter. Frost pushed it a few degrees, and now the latch end scrapes the driveway. Post realignment fixes it for good; lifting the gate half an inch fixes it until October.
- Rust-seized hinge bolts that nobody can break loose. Adams County water is hard on galvanized steel. After 40 or 50 years, those hinge bolts weld themselves solid with rust scale. You’ll snap a wrench before you’ll turn one. We cut the hardware, drill the post, and put in new hinges spec’d for the weight.
- Operators that die after windstorms. The chinook blows through at highway speed and slams the gate against the stop. That shock travels through the gate frame into the operator’s gearbox. We replace stripped gears, re-secure the mount, and usually recommend a stronger close-limit setting so the wind has less leverage next time.
- Weld fractures on the frame corners. A gate hung in 1968 has flexed through roughly 55 Colorado winters. That fatigue shows up as tiny cracks at the welded corners, which get bigger every year until a corner drops. We weld them on site and often add a small gusset plate if the frame is thin. The panel didn’t fail; the original weld just gave up.
Pricing for Gate Repair in Shaw Heights, CO
You should know what a fair price looks like before you call. In Shaw Heights, hinge and post repair on a typical chain-link or tubular steel swing gate runs $180 to $350 for a single post and hinge set. A full realignment with resetting a heaved concrete footing runs $280 to $450. Electric operator repairs land between $225 and $600 depending on whether it’s a limit switch or a full control board. Weld repairs start around $90 for a single crack and go up from there if the frame needs reinforcement at multiple points.
Every quote is written down before we touch a bolt. You get a price, you agree, and we start. If we find something else wrong mid-repair, we stop and tell you before doing the additional work. No surprise invoice at the end. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. If you already have a written estimate from another company, we’ll review it free. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Shaw Heights
If you’re just over the line in Westminster, Federal Heights, or Berkley, we still take the call. A lot of our Shaw Heights customers in the 80035 ZIP have family in Sherrelwood, and they pass our number along. Same crew, same pricing, same no-trip-charge promise inside the county. If your gate’s giving you trouble and you’re anywhere in the north metro, call (877) 610-2993 and we’ll tell you when we can be there.
Serving Shaw Heights, CO - Our Local Coverage Area
We’re based in the Shaw Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Shaw Heights
Your gate post heeled over the winter. Water from snowmelt percolates into the concrete collar around the post, freezes at night, expands, and tilts the post a few degrees. In Shaw Heights we see this every single spring on gates built before 1980. The fix is resetting the post and re-hanging the gate so it clears the ground again. Call (877) 610-2993 and we can usually be out same day.
We repair them in place almost every time. The bolts are rust-welded from decades of Adams County hard water, but the post and the panel are usually still structurally sound. We cut the old hardware off, sleeve the post if the bolt holes have elongated, and install new hinges rated for the gate’s weight. Replacing the whole gate is rarely necessary on these older Shaw Heights installations.
Three things fail after a chinook: the gearbox strips a tooth when the wind slams the gate, the limit switch gets knocked out of calibration, or a power surge fries the control board. On older FAAC and Linear units around Shaw Heights, the gearbox is the usual suspect. We diagnose on site, show you the failed part, and quote the repair before we proceed. Most operator repairs are done the same visit.
Probably not, and this is worth being honest about. Gates hung in the 1960s and 1970s predate modern safety requirements for entrapment protection and obstruction sensing. If you’re automating an original gate, we’ll tell you what needs to be added - usually a photo-eye or edge sensor and a properly mounted operator. We won’t automate a gate that isn’t safe to automate. It’s your family walking through it.
Most tickets are paired: a tilted post from heaving frost and rust-seized hinges from hard water. On a 1960s ranch in the heart of Shaw Heights, we found a dragging swing gate with a tilting galvanized hinge post whose original footing had heaved and cracked. The hinge bolts were rust-welded, so the crew cut and replaced the hinge hardware, reset the post footing, and corrected the sag before testing the operator. The panel didn’t need replacing. That’s the pattern. Call (877) 610-2993 for an exact quote on your gate.
Get Your Gate Working Again in Shaw Heights
You don’t need a gate that drags for another month or an operator that quit after the last storm. You need someone who knows Adams County’s hard water and Front Range freeze-thaw, and who isn’t afraid to say that your 55-year-old gate just needs hinges, a plumb post, and a fresh weld. Hal Gatewood has been at this since 2001, and the name on the shop is the one that stands behind the work. Call (877) 610-2993 today for a free estimate. We’ll answer the phone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Shaw Heights and the north metro Front Range.