Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Roswell
Gate repair in Roswell usually comes down to one of three things: a post that’s shifted in the red clay, an operator control board that’s given up, or a hinge that’s been carrying too much weight for too long. We fix all three, and we do it without telling you to replace a gate that’s still got years left in it. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and our crew serves Roswell neighborhoods like Horseshoe Bend, Willow Springs, and the river corridor west of Azalea Drive every week. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Roswell’s Preferred Gate Repair Company
Roswell isn’t a town where you can hide behind a call center. Our shop is local, Hal’s name is on every invoice, and the person who quotes your job is the same person who shows up with the welder. We’ve worked on hundreds of ornamental iron driveway gates across 30075, 30076, and 30077, from the winding streets of Horseshoe Bend to the tighter lots along Canton Street. Homeowners here tend to do their homework, and we’ve built our reputation in Roswell on showing up when we say we will and fixing what’s actually broken instead of selling what isn’t.
Roswell customers call us because we answer the phone at 2 a.m. the same way we do at noon. No dispatch queue, no “press 4 for emergency service.” You get Hal or one of his crew. When a gate fails at a HOA entrance on a Monday morning, you don’t have time to wait for a call back. We get to Roswell neighborhoods fast, and we carry the parts that Roswell gates actually need: Linear and Viking control boards, Elite swing arm components, LiftMaster limit switches. That means one trip instead of three.
Our Gate Repair Services in Roswell
Gate Realignment
The number one call we get in Roswell is a swing gate that’s started dragging or binding. Most of the time it isn’t the hinges. Roswell’s red Georgia clay expands when it’s saturated and shrinks when it dries, and over a few seasons that movement shoves post footings out of plumb. A gate that dragged in March might swing fine by August, then bind again after the next downpour. We don’t just adjust the hinges and call it done. We check the post first, because a gate sags in the hinge post, not in the middle. If the post has moved, we reset it properly or brace it so it stays put.
Hinge & Post Repair
Wrought iron gates are heavy, and Roswell’s older subdivisions are full of them. When a hinge post shifts even a quarter inch, the entire gate geometry changes. Welded hinge barrels crack, pivot pins wear out, and the gate starts leaning on the latch side. We weld on site in your driveway, which means the gate never leaves your property. No hauling it to a shop, no week-long wait. For HOA monument gates with dual-swing iron panels, a cracked hinge or a shifted post on one side forces the other side to carry more than it was built for. We fix the post, rebuild or replace the hinge, and the gate swings like it should.
Automatic Gate Repair
Most of Roswell’s automated gates were installed between the mid-1980s and mid-2000s, which means the operators are now 15 to 25 years old. That’s exactly when control boards, capacitors, and limit switches start failing, often in clusters across a subdivision. We service LiftMaster, Elite, Viking, Linear, FAAC, BFT, Ghost Controls, DoorKing, and Mighty Mule operators. When a board fails, we don’t automatically recommend replacing the whole operator. We diagnose the failure, replace what’s dead, and re-tune the limits and force settings so the gate cycles cleanly.
Electric Gate Repair
Electric gate repair in Roswell often means chasing wiring and safety sensors that years of Georgia humidity have corroded. Loop detectors buried under driveways, photo eyes mounted on posts, wire splices inside junction boxes, they all fail eventually. We test the entire circuit, not just the part that stopped working. On shared driveways and HOA entrances, a failed safety photocell can lock residents out during the morning rush, so we keep the most common replacement sensors on the truck for Roswell calls.
Weld & Rust Repair
The humidity along the Chattahoochee River corridor is hard on ornamental iron. We routinely see gates in the river-facing neighborhoods west of Azalea Drive with rust and corrosion that would be unusual just a few miles east in the drier upland subdivisions. We grind out rust, weld in new sections where the metal is too thin, and repaint with a finish matched to the existing gate. Done right, the repair disappears into the rest of the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roswell
Roswell’s gates span nine major brands, and we’re certified to service all of them: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The brands we see most often on Roswell’s 1980s and 1990s wrought iron gates are Elite, Viking, and Linear, and we keep the most common replacement parts for those operators in local stock. That means when your Elite swing arm actuator on a Horseshoe Bend driveway gate fails, we’re not waiting on a parts drop. If we don’t have it on the truck, we can usually have it in hand within a day.
Common Gate Repair Problems We See in Roswell Homes
- Red clay shifting gate posts. Roswell’s clay soil heaves seasonally, and swing gate posts set in shallow footings move with it. The gate starts fine, then drags on the latch side after a wet spell. The fix is resetting the post or adding a deeper footing with rebar, not just cranking the hinges.
- Early control board corrosion near the river. Low-lying neighborhoods west of Azalea Drive and along the Chattahoochee hold more ambient moisture, and we find operator control boards and actuator bearings corroding years earlier than the same equipment in the upland subdivisions. Sealed enclosures and regular inspection are the cheapest insurance.
- Failed loop detectors on shared driveways. HOA entrances and shared driveways get continuous vehicle and pedestrian traffic, and a failed loop detector or safety photocell doesn’t just inconvenience one house. It backs up the whole community. We prioritize these calls because we know what a Monday-morning mess a dead entrance gate creates.
- Slider gates binding on the rack. Sliding gates are common in Roswell where a swing gate won’t fit, usually on shorter driveways or properties with tight setbacks near the street. The rack and pinion system needs clean alignment and a level track, and when the ground shifts under the track, the gate grinds and strains the motor.
Pricing for Gate Repair in Roswell, GA
Here’s what Roswell homeowners can expect, based on the actual jobs we do here week to week:
- Gate realignment (post reset or hinge/geometry correction): $225-$600. Simple hinge adjustments run lower; a full post excavation and reset with new concrete runs toward the top.
- Hinge replacement (welded on site): $180-$450 per hinge set, depending on gate weight and access.
- Automatic operator control board replacement: $295-$750 installed, with parts and labor included.
- Complete operator replacement (existing gate): $850-$1,800 from a basic residential arm to a commercial-grade HOA swing operator. We quote the exact number before any work starts.
- Weld and rust repair: $160-$500 per section, including grinding, welding, and matched repaint.
Every price is quoted and agreed in writing before the first tool comes off the truck. No trip charge for jobs inside the county. $40 off any repair over $200. Seniors and veterans get 10% off for life. And a free second opinion on any written estimate from another company, bring it and we’ll look at it honestly.
We Also Serve Cities Near Roswell
Our Gate Repair team covers Roswell and the surrounding communities, so the same crew that knows Horseshoe Bend’s clay posts also works Alpharetta, Johns Creek, Milton, and Sandy Springs. If your gate is binding in one of those towns, the soil and the climate are often the culprit there too. Call (877) 610-2993 and we’ll put you on the schedule.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Roswell
Because the hinges aren’t the problem. Roswell’s red clay expands and contracts with seasonal moisture, and over a few years the post footing shifts out of plumb. Adjusting the hinges is a temporary patch that lasts until the next rain. The real fix is resetting the post or bracing it with a deeper footing. Call (877) 610-2993 and we’ll tell you what’s actually happening.
In Roswell, it’s usually one of three things: water in the loop detector junction box, a photo eye that’s shorted from moisture, or a control board that got wet from rising humidity. We test the loop, the photo eyes, and the board, then fix only what failed. Estimates are free, so call (877) 610-2993 and we’ll diagnose it on site.
Yes, and that’s what we do most often in Roswell. The gate itself, the posts, and the hinges usually have decades left in them. We remove the old operator, install a new one, and re-tune the limits and force settings to match your gate’s weight and travel. No new gate needed, no upsell. Call (877) 610-2993 for a written quote.
Almost always the track or the gate’s wheel alignment. When the ground under a slide gate shifts, even slightly, the gate grinds against the rack and the motor strains. If the motor is still running, it’s usually fine. We level the track, realign the wheels, and the motor relaxes. Call (877) 610-2993 and we’ll come look at it.
At minimum every six months, and more often if the gate gets heavy daily traffic like most Roswell HOA entrances. A photocell that’s dirty, misaligned, or failing can stop the gate from closing, or worse, fail to detect a vehicle or pedestrian. We can set up a simple inspection schedule and document the test results for your HOA board. Call (877) 610-2993 to get it on the calendar.
Call for Gate Repair in Roswell
If your gate is sagging, binding, or dead in the driveway, call (877) 610-2993 and you’ll get Hal or one of his crew on the line. We answer live, 24/7. We’ll schedule a time that works, show up in that window, and give you a written price before any work starts. Every job carries the 90-Day Done Right Promise. If it isn’t done right, we make it right. That’s the deal, and it’s been the deal since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Roswell and the surrounding communities.