Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Revere
If your gate is sagging, grinding, or refusing to open on a cold Revere morning, we can usually have it diagnosed same-day and repaired within 48 hours. Gate repair in Revere costs between $160 and $850 for most common failures, depending on whether we’re dealing with a rusted hinge post, a corroded control board, or a snapped weld. Call (877) 610-2993 and you’ll get Hal or a member of his crew on the line, not a recording. We know Revere’s driveways, its salt air, and its particular breed of gate failure from nearly a quarter century of fixing gates along this coast.
Why Gatewood Fence & Gate Is Revere’s Preferred Gate Repair Company
We’re a locally owned, owner-operated shop. Hal Gatewood has been at this since 2001, and his name is on the invoice, the truck, and the shop. That matters in a city like Revere, where a gate that won’t close on a triple-decker side yard is a security problem, not a convenience. Homeowners along Broadway, in Beachmont, and over in the West Revere neighborhood call us because we’ve fixed their neighbor’s gate well enough that the neighbor told them to call.
Revere customers get a live person on the phone 24 hours a day, seven days a week. No voicemail tree, no call center. When you call about a gate dragging on its track near Revere Beach Boulevard, you’re talking to someone who has actually pulled that same model apart. Our repair team serves Revere locally, coordinated from our Boston office, and we stock the common hardware for this area’s gate systems so we aren’t waiting a week on a part from a distributor.
Every job carries our 90-Day Done Right Promise in writing. If it isn’t done right, you call and Hal comes back. That’s the whole guarantee. No fine print, no arguing. And the price we quote before we start is the price you pay. Nothing changes at the door.
Our Gate Repair Services in Revere
Electric Gate Repair
Revere’s oceanfront air is hard on electric gate systems. Operator control boards corrode internally from salt-humid intrusion, causing intermittent failures that look like a wiring problem but aren’t. We diagnose the actual failure, not the symptom. That means testing the board, the limit switches, the loop detector, and the incoming power before swapping anything. A typical electric gate repair in Revere runs $180 to $540, and we’ll tell you the number before we touch a screwdriver.
Automatic Gate Repair
Automatic gates along Revere Beach Boulevard and in the newer condo developments off Ocean Avenue fail differently than gates inland. Salt film coats the safety photocells, reducing their range and triggering nuisance stops. Rack and pinion components rust. Underground operator boxes fill with condensation. We repair these in place wherever possible, including swapping hardware to galvanized or sealed equivalents so the repair actually lasts. Expect $220 to $650 for most automatic gate motor and operator service calls in Revere.
Hinge & Post Repair
This is the repair most Revere homeowners actually need and the one most gate companies skip. A gate sags in the hinge post, not in the middle. If the post is rusted through at ground level or set in a shallow footing that’s heaved from a Revere winter, adjusting the hinges won’t fix anything. We cut out the rotted section, weld in fresh steel, or reset the post in a deeper footing. Depending on how far gone the post is, hinge and post repair in Revere runs $240 to $760.
Gate Realignment
Freeze-thaw cycles here heave posts and throw gate alignment out by fractions of an inch. That fraction is enough to make a gate scrape, slam, or refuse to latch. We realign the gate, set the hinges properly, and if the post has moved, we deal with the post instead of just grinding the latch plate. Most realignments in Revere cost $160 to $340 and are done the same visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We’re certified to service nine major gate brands, and in Revere we see a lot of Viking, DoorKing, and Elite operators because they were widely installed in the condo builds along Revere Beach Boulevard and the older single-family homes across Shirley Avenue. We keep common boards, photocells, and remotes for these brands on our service trucks, which means less waiting and fewer return trips. If the part isn’t on the truck, we can usually have it in hand in a day or two and finish the job the same week. Call Gate Repair and tell us what brand you have. We’ll know the failure patterns before we arrive.
Common Gate Repair Problems We See in Revere Homes
- Salt-corroded control boards. Revere’s ocean air gets into operator enclosures and eats circuit boards from the inside. The gate works fine for six months, then starts faulting for no visible reason. That’s not a wiring problem, it’s corrosion.
- Rusted-through hinge posts. Steel posts near Revere Beach Boulevard can rust through in a few seasons, not a few decades. The gate starts sagging, and no amount of hinge adjustment fixes it. The post has to be replaced or sleeved.
- Heaved and misaligned posts. Revere winters freeze and thaw the ground repeatedly. Posts set in shallow footings move. The gate that latched perfectly in September is dragging on the latch plate by February.
- Failing safety photocells. Salt film from the coastal air builds up on the lenses and reflects badly, causing the gate to stop halfway or refuse to close. Cleaning helps for a week. Replacing with sealed units does the job properly.
Pricing for Gate Repair in Revere, MA
Here’s what we actually charge in Revere, not a national average. A basic gate realignment runs $160 to $340. Hinge and post repair runs $240 to $760 depending on how much steel needs replacing. Electric gate repair, including control board replacement on common Viking or DoorKing units, runs $180 to $540. Full automatic gate motor replacement with a new operator runs $650 to $1,400 installed. Weld and rust repair on ornamental gates runs $200 to $600. If a repair quote exceeds $200, take $40 off. That’s automatic, not something you have to ask for. Seniors and veterans get 10% off everything, permanently. And there’s no trip charge anywhere inside the county. You’ll have the price in writing before we start, and it won’t change when the work is done. Call (877) 610-2993 and we’ll walk through what you’re seeing and what it’ll cost.
We Also Serve Cities Near Revere
While this page is for Gate Repair in Revere, our crews regularly take care of gates in Chelsea, Everett, Winthrop, and Malden. If you’re just over the line in any of those cities, the same crew, the same guarantee, and the same upfront pricing apply.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Revere
Salt-laden air from Massachusetts Bay pushes humid, corrosive air into the operator housing, where it condenses on the control board. The board corrodes internally and starts failing intermittently, even if the outside looks clean. Most gate operators rate their life under inland conditions. Revere’s ocean exposure cuts that life significantly unless the operator is sealed, ventilated, and fitted with corrosion-resistant internals. We fix this by replacing the board with a sealed enclosure and using galvanized or stainless hardware wherever salt can reach it. Call (877) 610-2993 if your gate has started stopping for no reason.
In many cases yes, if the rot is localized and the post is otherwise sound. We cut out the corroded section, weld in a fresh steel sleeve or replacement segment, and dress the welds so the repair matches the surrounding metal. If the post is rusted through at the base and the footing is shallow, a partial repair won’t hold and you’ll be back where you started. We’ll show you the post and tell you honestly which situation you have. Most Revere homes with ornamental gates on the beach side need a full post replacement eventually, and doing it once the right way is cheaper than doing it in pieces.
The hinge post is almost certainly moving, rusting, or both. We can’t stress this enough: a gate sags in the hinge post, not in the middle. The panel is just along for the ride. In Revere, where posts are often set in tight triple-decker side yards and shallow footings, the freeze-thaw cycle works the post loose and the gate starts dropping. We reset or replace the post, then realign the gate to swing cleanly. If you keep adjusting the hinges on a bad post, you’ll fix it twice. Call us at (877) 610-2993 and we’ll take a look before it gets worse.
Salt film builds up on the photocell lenses from ocean spray and road salt mist, reducing the beam range and triggering false faults. In the winter, the salt crust freezes and builds up faster. Cleaning gets you a week or two. Replacing the cells with sealed, heated units designed for coastal environments solves it for good. We install those on most Revere gate systems now, especially near the beach. A photocell replacement pair in Revere typically runs $120 to $260 installed.
Start with the right metal and the right preparation. We specify hot-dip galvanized steel or stainless for any fabricated gate going up within a half-mile of Revere Beach Boulevard. Then we prime and powder-coat or paint with a marine-grade finish, not standard exterior paint. Hinges, latches, and fasteners get the same treatment or stainless equivalents. And every operator gets a sealed enclosure with a desiccant pack where the manufacturer allows it. Nobody can stop coastal rust entirely, but we can slow it to a crawl. Call (877) 610-2993 for a real conversation about what your gate needs.
How Revere’s Oceanfront Throws Every Generic Gate Repair Guide Out the Window
Here’s what you won’t read on a generic gate repair page. Within a half-mile of Revere Beach Boulevard, constant ocean salt spray corrodes gate hinges, frames, and automatic-gate motor housings much faster than manufacturer life-cycle estimates. Add the road salt from New England winters, and you get a double-corrosion environment that inland gate contractors never see. Stainless or galvanized hardware and sealed operator enclosures aren’t an upgrade in Revere. They’re the minimum standard for a repair that doesn’t fail in eighteen months.
We saw this firsthand on a Revere Beach Boulevard luxury condo. The FAAC slide gate operator had a control board corroded internally from salt-humid air intrusion. That failure mode is almost unknown in inland suburbs like Malden or Medford. We replaced the board with a sealed enclosure, swapped the rack and pinion components for galvanized, and then recalibrated the loop detector so the gate wouldn’t false-trigger every time a car waited too long. That job was about understanding Revere’s environment, not just swapping parts.
The other thing Revere throws at us is the housing stock. Most of Revere’s homes are densely packed two- and three-family triple-deckers and small single-family homes built between 1910 and 1960 on tight urban lots. Driveways are narrow, side yards are narrow, and the gate openings reflect that. Hinge placement has to be precise. Swing arcs have to clear the neighbor’s fence, the parked car, and the trash barrels. And the posts are often set in aging concrete or brick piers that have been holding up gates for sixty years. Weld and rust repair on custom ornamental gates here isn’t just about the metal. It’s about the post underneath, the footing below that, and the salt that’s been eating both for decades. That’s the job we do.
If your gate is giving you trouble in Revere, call (877) 610-2993. Free estimate, upfront pricing, and we’ll tell you what’s actually wrong before we touch anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Revere since 2001.