Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Prosper
Gate repair in Prosper typically runs $180 to $340 for hinge realignment and operator tune-ups, while a full operator replacement on one of the area’s heavy iron gates usually lands between $1,200 and $2,600. We get to Prosper homes quickly, usually same-day or next morning, because we work this area every week. If your gate is sagging, grinding, or refusing to open at all, call (877) 610-2993 and you’ll get a live person who can tell you what’s wrong and what it’ll cost before we ever roll a truck.
Why Gatewood Fence & Gate Is Prosper’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. When a Prosper homeowner calls, they’re not getting routed through a call center. They’re talking to someone who knows the difference between a gate binding because of Blackland Prairie clay and a gate binding because the operator arm was installed wrong. That distinction matters around here, because Prosper’s soil causes problems that a tech from out of town will misdiagnose every time.
We’ve worked on gates in Windsong Ranch, Star Trail, Light Farms, and just about every other master-planned community in the 75078 zip code. Many of those gates were installed between 2015 and 2023, and they’re all hitting their first serious service cycle at the same time. We stock the boards, hinges, and photocells those systems need, so we’re not waiting on a parts truck while your gate sits open all weekend.
Every repair carries our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back and makes it right. That’s not a warranty buried in fine print. It’s one sentence on your invoice, and a phone number that a real person answers 24 hours a day.
Key Takeaways
- Same-day and next-morning response to Prosper, coordinated from our Dallas-Fort Worth office with crews who service this area locally.
- Upfront pricing quoted and agreed before any work starts, $40 off any repair over $200, and no trip charge inside the county.
- 90-Day Done Right Promise on every job, in writing.
- On-site welding means your gate stays in your driveway instead of getting hauled to a shop.
Our Gate Repair Services in Prosper
Electric Gate Repair
Prosper’s electric gates run on operator boards, limit switches, and safety photocells, and when any of those fail, the gate either refuses to move or tries to close on a car. We repair LiftMaster, FAAC, BFT, Linear, and Viking operators, and we usually have the common boards on hand. If your keypad works but the gate won’t respond, the issue is usually a dead board or a fried transformer, and we’ll tell you which one before we touch anything.
Automatic Gate Repair
Heavy ornamental iron gates need robust operators, and the builder-grade units installed in Prosper homes between 2015 and 2023 are often undersized for the weight they’re asked to move. A LiftMaster LA400 or FAAC 400 can work fine on an aluminum gate, but bolt one onto a 600-pound iron gate and it’ll chew through its plastic gear train in three to five years. We see this pattern constantly in Prosper’s newer neighborhoods, and the fix is usually an upgraded operator matched to the gate’s actual weight.
Hinge & Post Repair
The Blackland Prairie clay under Prosper expands after spring rains and shrinks in summer drought, and that movement heaves gate posts out of plumb. A gate that binds at the top or drags on the ground is almost always a post problem, not a panel problem. Fix the panel without addressing the post and you’ll pay to fix it twice. We set posts, weld cracked hinges on site, and shim or re-pour footings when the concrete was poured too shallow.
Gate Realignment
Swing gates in Prosper develop alignment problems because the post footings move, not because the gate panel warps. We check plumb on both posts, measure the reveal at the top and bottom, and adjust the hinges or the post before touching the operator. Slide gates, by contrast, bind on their rack and pinion tracks when the concrete pad shifts, and that requires a different fix entirely. Either way, the gate should swing or slide without shuddering, and we’ll get it there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Prosper
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Prosper customers, that means we stock the boards, remotes, photocells, and limit switches for the three brands we see most often in this area: FAAC, BFT, and Linear. If we don’t have a part on the truck, we can get it fast. What we won’t do is tell you we fixed it while waiting on an aftermarket knockoff part that’ll fail in a month. When we do a repair, it’s a Gate Repair job done once, done right.
Common Gate Repair Problems We See in Prosper Homes
- Builder-grade operator failure. The LiftMaster LA400 and FAAC 400 operators installed during Prosper’s building boom are undersized for heavy iron gates, and their plastic gears strip within three to five years. The gate starts grinding, then shudders, then stops altogether.
- Missing conduit and power runs. Many Prosper homes were built without dedicated conduit for gate automation, which means safety photocell wiring is either surface-mounted, exposed, or missing entirely. Adding automation or replacing a failed board often requires trenching a new run and adding surge protection against North Texas lightning.
- Post heave from Blackland Prairie clay. The expansive clay under Prosper swells in wet weather and shrinks in drought, and posts set in shallow footings heave, tilt, and lose plumb alignment. The gate leaf binds at the latch or the operator arm fights the post every time it cycles.
- Ice storm damage to operators and limit switches. February 2021 was a wake-up call for every automatic gate owner in Prosper. Freezing rain gets into hydraulic and electromechanical operators, shatters limit switches, and burns out transformers when the board tries to run against a frozen hinge. After every ice storm, we get a spike of calls from the same neighborhoods.
Pricing for Gate Repair in Prosper, TX
Here’s what you can expect to pay in Prosper’s market. A hinge realignment or post shim typically runs $180 to $340. Replacing a failed operator board on a FAAC or LiftMaster unit lands between $350 and $700. A full operator replacement on a heavy iron gate, installed and adjusted, runs $1,200 to $2,600 depending on the gate’s weight and whether we’re trenching new conduit. Weld and rust repair on ornamental iron runs $150 to $500 depending on the extent of the damage.
Every quote is given before we start work, and that’s the number on your invoice. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll tell you the price on the phone, not after we’ve already started pulling things apart.
We Also Serve Cities Near Prosper
We work throughout the northern Dallas-Fort Worth corridor, including Frisco, Celina, Little Elm, and Fairview. If you’re in a neighboring city and need Gate Repair in Prosper or the surrounding area, the phone number is the same and the response time is just as fast.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Prosper
The builder-grade operators installed in Prosper’s newer communities, often LiftMaster LA400 or FAAC 400 units, are sized for aluminum gates but get bolted onto 500 to 700 pound ornamental iron gates. The plastic gear trains strip, the motors overheat, and the boards burn out trying to move weight they were never rated for. The fix is an upgraded operator matched to the gate’s actual weight, plus a surge protector for North Texas storms. Call (877) 610-2993 and we’ll tell you what your gate actually needs.
Yes, and we do it often. The catch is that many Prosper homes built during the 2015-2023 boom were framed without dedicated conduit runs to the gate, so we often have to trench a new power run and install the safety photocell wiring at the same time. We’ll give you a written quote that includes the trenching, the operator, and the safety edges, and the price is agreed before we dig.
Light Farms sits on Blackland Prairie clay, which swells dramatically after spring rains and shrinks in drought. When the clay swells, it pushes against your gate post footings and tilts the posts out of plumb, which binds the hinges. When the ground dries out, the posts settle back. The real fix is to reset the posts in deeper footings, not just shim the gate, because the cycle repeats every year unless you address the root cause. We’ll explain exactly what’s moving and what it’ll cost to stop it moving again.
Yes. Photocells aren’t just for kids. They stop the gate from closing on a car, a delivery driver, a dog, or you, and they’re also a code requirement on most automatic gates in Prosper. If your gate was installed without working photocells or the wiring was never run, we’ll add them as part of any automation repair or retrofit. It’s not an upsell. It’s the system working the way it was supposed to work from day one.
It could be, but it’s often a post or hinge problem putting extra load on the motor. In Prosper, where the clay heaves posts out of alignment, the operator arm has to fight the gate’s weight plus the binding from the misaligned hinges, and that strain sounds like a grinding motor. We’ll diagnose which problem you actually have before replacing anything, because swapping a $600 board won’t fix a post that’s tilted two degrees out of plumb. Call (877) 610-2993 and we’ll sort out the real problem.
Call Gatewood Fence & Gate for Gate Repair in Prosper, TX
We’ve been fixing gates in Prosper long enough to know which neighborhoods have trouble with heaving posts, which builders routed conduit properly, and which operators are going to fail next. Hal Gatewood’s name is on the shop and on every invoice, and the phone rings to a live person 24 hours a day. If your gate is misbehaving, call (877) 610-2993 for a free estimate. You’ll get a straight answer, a written price, and a 90-Day Done Right Promise that means what it says.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper and the surrounding North Texas communities since 2001.