Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Prosper
If your gate post has heaved out of plumb on Prosper’s black clay or a wrought-iron hinge has torn loose, you need someone who understands exactly how gates fail here. We repair on site, most Prosper jobs within a day or two of your call. Gatewood Fence & Gate has been fixing gates since 2001, and we handle the whole job in your driveway – post replacement, hinge rebuilds, rail repair, custom welding – without hauling your gate off or selling you parts you don’t need. Call (877) 610-2993 and you’ll get Hal or someone from our crew, not a recording.
Why Gatewood Fence & Gate Is Prosper’s Preferred Gate Parts & Welding Company
Prosper homeowners keep our number because we show up when we say we will, and because the work holds. Hal Gatewood’s name is on the shop and on every invoice – that has been true since 2001. We’re not a franchise van passing through. When a Windsong Ranch homeowner calls about a gate dragging in August, we know before we arrive that the clay under the post has shrunk and the hinge has racked, because we have repaired that exact failure on a dozen other lots in that neighborhood this drought cycle.
We answer the phone around the clock with a live person. Not a voicemail, not a call center three states away. The person who answers is someone who can actually schedule your repair, and often the person who shows up is the same one you talked to. Our Gate Parts & Welding crew carries steel stock, replacement hinges, rollers, and operator hardware on the truck, so most Prosper repairs don’t need a second trip.
Every job – parts and labor – carries our 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. That’s it. No fine print, no arguing about what “right” means. We also offer a free second opinion on any written estimate you’ve gotten from another company, because a lot of Prosper homeowners have been quoted full gate replacement when the real fix was a $300 post reset.
Our Gate Parts & Welding Services in Prosper
Hinge Replacement
Wrought-iron and heavy steel gates in Prosper’s $600K-$1.5M+ homes put enormous load on their hinge barrels, especially swing gates on long private driveways. We see hinge pins that have worn egg-shaped after five or six years of Blackland Prairie settling, and we see hinge plates torn loose from posts that shifted just enough to make the gate bind. We cut out the old weld, true the post if it’s sound, and burn in new heavy-barrel hinges with full-penetration welds sized for the gate’s actual weight – not whatever the original builder guessed at.
Post Replacement
This is the repair Prosper needs most and the one national outfits routinely misdiagnose as “needs a new gate.” A gate sags because the post moves, not because the panel got tired. In Prosper’s expansive clay, posts set in 2017-2020 footings were often poured too shallow and too narrow for the soil’s shrink-swell cycle. We dig out the old footing, set the new post deeper with a concrete bell below the active clay zone, and re-hang the gate so it swings true. The gate stays in your driveway the whole time.
Rail Repair
Slide gates on rack and pinion drives are common in Prosper side yards and shared driveway easements where a swing gate would block a neighbor’s access. When the post footing shifts even half an inch, the rack teeth and pinion gear start chewing each other. We straighten or replace the rail, reset the rack alignment, and replace chewed pinions so the gate rolls smoothly instead of grinding. We also re-shim the rollers to restore the gate’s level and keep the motor from working against itself.
Custom Welding
Some repairs don’t fit a parts catalog. A snapped picket on an ornate aluminum gate, a cracked operator mounting bracket, a custom throw-bolt that no manufacturer makes – that’s where our on-site welding saves you from waiting weeks on a fabricated part or paying to replace a gate that just needs a proper weld. We TIG and MIG weld aluminum and steel on site, and we match the existing finish as closely as the material allows. If you need a gate widened, a second leaf added, or a pedestrian pass-through built into an existing slide gate, we do that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Prosper
We’re certified to service nine major gate operator brands, and the ones we see most in Prosper are FAAC, BFT, Linear, and Viking. The builders who put up Windsong Ranch, Star Trail, and Light Farms installed a lot of these operator systems, and we carry the common boards, limit switches, and safety hardware for them on the truck. When a FAAC board fails after a North Texas freeze, we usually have the replacement in hand the first trip, not ordered and promised for next week.
Common Gate Parts & Welding Problems We See in Prosper Homes
Prosper’s housing stock is nearly all new construction on large lots, and the gates – ornate iron, heavy steel, automated – were installed in waves between 2015 and 2023. That means thousands of same-vintage systems are now hitting their first serious service cycle at the same time. Here’s what we actually see:
- Posts racked by Blackland Prairie clay. The black clay under Prosper swells after spring rains and shrinks hard in summer drought. Footings poured during the 2017-2020 boom were often too shallow for that movement, so posts heave and lean until the swing leaf binds against the latch or the slide gate rollers jump their track. We fix the post, not just the symptom.
- Ice-storm damage to operator boards and limit switches. North Texas ice storms – February 2021 being the worst – freeze hydraulic and electromechanical operators and shatter limit switches. After a hard freeze, we see a predictable wave of dead boards, stripped gears, and misaligned safety sensors across Prosper’s master-planned communities.
- Hinge wear on heavy swing gates. Long private driveways in neighborhoods like Light Farms and Star Trail mean big swing gates – 14 to 18 feet, often dual-leaf. The hinge pins on those gates carry hundreds of pounds every cycle. After a few years of clay-driven misalignment, the pins wear egg-shaped and the gate drops, scraping the driveway.
- Slide gate gear teeth chewed in narrow side yards. When a Post Oak or Glen Eagle home has a shared driveway easement or a side yard too narrow for a swing, the slide gate rides on a rack and pinion. If the post footing shifts even a little, the rack and pinion misalign and the teeth grind down. We replace the rack, pinion, and rollers so the gate clears pedestrian and vehicle lanes cleanly.
Pricing for Gate Parts & Welding in Prosper, TX
Typical hinge replacement in Prosper – new heavy-barrel hinges, burned in with full-penetration welds, gate re-hung and adjusted – runs $285-$520 per hinge pair depending on gate weight and whether the post needs truing. Post replacement, with old footing removal, new concrete bell below the shrink-swell zone, and the gate re-hung, typically runs $475-$1,150 per post. Rail repair for a slide gate – straightening or replacing the rack, new pinion if needed, roller re-shim – runs $320-$675. Custom welding jobs start around $120 for small brackets and repairs and go up from there for structural work. Every price is agreed before we start, in writing. Standing offers: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Prosper
Our Prosper customers come from all over the 75078 ZIP, but we also work regularly in Frisco, Celina, Little Elm, and Fairview. If you’re in one of those communities and your gate has started binding, sagging, or grinding, call us – we service the whole north Collin County corridor and we’ll tell you over the phone whether it’s urgent or can wait a few days.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Prosper
The answer is the soil. Prosper sits on Blackland Prairie clay that swells dramatically after spring rains and shrinks hard in summer drought. Gate posts installed during the 2017-2020 building boom were often set in concrete footings sized for more stable soils, so after just a few wet-dry cycles the post racks out of plumb enough to bind the operator arm. We see this pattern sweep through master-planned communities section by section as each patch hits the five-year mark. The fix is a post reset with a deeper concrete bell below the active shrink-swell zone, and we do it with the gate in place. Call (877) 610-2993 if your gate is starting to lean.
Yes. Shared driveway easements are common in Prosper, and we stage the work so the pedestrian lane or the vehicle lane stays open throughout. For a rack and pinion repair, we cut the old rail free, install the new rack or re-shim the existing one, and replace chewed pinion gears while the gate remains on its track. The gate may be temporarily immobilized while we align the rack, but we never close both lanes at once on a shared driveway unless the property has a second access point. Same-day repair in Prosper is often possible; call us before noon at (877) 610-2993 and we’ll give you a straight answer.
Probably not. Almost every sagging gate we see in Prosper is a post problem, not a panel problem. In August, the Blackland Prairie clay has shrunk hard after months of Texas heat, the footing has dropped or tilted, and the whole gate assembly has shifted. The panel itself is usually fine. We reset the post, re-hang the leaf, and the gate clears the driveway again. A new panel would just sag again on the same bad post within a year. If you want to know for sure, call (877) 610-2993 – a second opinion on any written estimate is free.
First, check the breaker and the GFCI outlet the operator plugs into – ice storms frequently trip GFCIs on exterior outlets. If power is confirmed, the most common post-freeze fail point is the control board, followed by the limit switches, which can physically shatter when frozen. LiftMaster operators are common across Prosper and we stock boards and limit switches for them. But don’t open the operator housing yourself – capacitor charge and live terminals are a genuine shock risk. Call (877) 610-2993 and we’ll have someone out to diagnose it, usually the same day during a post-ice-storm spike.
They do, and here’s why: we size the weld for the gate’s actual weight and the post’s actual condition, not a book spec. On steel, we use full-penetration welds with proper preheat in cold weather, which prevents the brittle micro-cracking that shows up after a hard freeze. On aluminum, we select the right filler alloy and clean the base metal properly, because mill scale and oxidation are the real enemies of a lasting aluminum weld. Every weld we make in Prosper carries the same 90-Day Done Right Promise as the rest of the job, and if a weld ever fails under normal use, we come back and re-weld it – no charge, no argument. Call (877) 610-2993 for a free estimate on any welding work.
Call Gatewood Fence & Gate for Gate Parts & Welding in Prosper
If your gate is leaning, binding, grinding, or just not responding, call (877) 610-2993. You’ll reach a live person, we’ll give you an honest assessment over the phone, and we’ll schedule a time that works for you. Free estimates, upfront pricing agreed before any work starts, and the 90-Day Done Right Promise on every job. Hal Gatewood’s name is on the shop and on every invoice – that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper since 2001.