Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Piqua
Gate repair in Piqua usually runs between $140 and $380 for most hinge, latch, and realignment jobs, and a full post re-set on a riverside property often lands between $450 and $900 because the footing itself has to be dug out and poured fresh. If your gate is sagging, dragging, or dead weight on its hinges, we can usually get to your property in Piqua the same day you call. Hal Gatewood has been fixing gates since 2001, and the shop is set up to do the welding and fabrication work right in your driveway so the gate never leaves your yard. Call (877) 610-2993 and you’ll get a live person, not a phone tree.
Why Gatewood Fence & Gate Is Piqua’s Preferred Gate Repair Company
We’re not a franchise and we don’t run a call center. Gatewood Fence & Gate is owned and operated by Hal Gatewood, whose name is on the shop and on every invoice. When you call from Piqua, the person who answers is someone who knows gates, and if the job needs welding or a second set of eyes, Hal shows up himself. We serve the whole 45356 area, and our crews know the streets around Forest Hill Cemetery, the neighborhoods off Sunset Drive, and the older river-bottom lots near Fountain Park better than any out-of-town outfit ever will.
We carry parts for Viking, Ghost Controls, and DoorKing openers on the truck, which means we’re not waiting a week on a control board while your gate sits open. And every repair we do in Piqua carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. That’s the whole deal.
Our Gate Repair Services in Piqua
Electric Gate Repair
Electric gates in Piqua take a beating from humidity off the Great Miami River and the freeze-thaw cycling that hits every February and March. We diagnose dead openers, fried control boards, bad limit switches, and wiring that rodents have chewed through. If your opener is a Viking, a Ghost Controls, or an old DoorKing, we stock the boards and remotes to get it running again, usually in one visit.
Automatic Gate Repair
Automatic gates fail in predictable ways: the opener loses its limits, the safety photocells get knocked out of alignment, or the arm binds because the hinge post has moved. In Piqua, that last one is especially common near the river. We fix the mechanical problem and the opener problem together, because fixing one without the other means you’ll be calling us again in six months.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. Piqua’s older homes, many built between the 1910s and 1950s, often have original iron gates hung on posts that have been in the ground for 70 or 80 years. Freeze-thaw heaving has moved those posts out of plumb, and no amount of hinge shimming will fix that. We cut out the old footing, re-set the post in fresh concrete, and weld on new hinges so the gate swings true.
Gate Realignment
When a double gate starts dragging or the latch won’t catch, the cause is almost always a shifting post or a stretched hinge. We straighten what can be straightened, re-set what can’t, and adjust the drop rod and latch until the gate closes without a fight. On Piqua properties with alley-loading garages, rear gates get opened and closed multiple times daily, so proper alignment isn’t a cosmetic fix, it’s a daily-wear issue.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Piqua
We’re certified to service nine major gate opener brands, and in Piqua we most often work on Viking, Ghost Controls, DoorKing, and Elite. Because we stock common boards, remotes, and safety photocells for these brands, we can often finish an opener repair the same day instead of ordering a part and leaving your gate inoperable for a week. If you have an older opener that’s been discontinued, we’ll tell you straight whether it can be retrofitted or whether a new operator is the cheaper long-term answer.
Common Gate Repair Problems We See in Piqua Homes
- Rust and hinge failure near the river: Piqua’s position along the Great Miami River means many residential and light-industrial properties sit in or near the floodplain. Repeated flood exposure keeps metal hardware damp for weeks at a time, and that accelerates rust on uncoated steel hinges and drop rods far faster than you’d see on higher ground in Miami County.
- Leaning, non-latching gates from freeze-thaw heaving: Late winter and early spring bring the worst of it. The concrete footings anchoring gate posts expand and contract as the ground freezes and thaws, and after enough cycles the post is simply no longer vertical. We see this every March in Piqua, especially on older properties where the original footings were poured shallow.
- Obsolete control boards on legacy gates: Many Piqua homes still have automatic gates installed 20 or 30 years ago, with control boards that manufacturers stopped supporting years ago. When those boards die, replacement parts simply aren’t available. We retrofit where possible and replace the operator when the math says repair would cost more than a new unit with a warranty.
- Worn hinges on alley-access rear gates: Piqua’s older neighborhoods have tight lots with alley access, and rear-yard gates on those alleys see heavy daily use. Hinges on those gates wear out years faster than on a typical suburban side gate, and by the time the gate is dragging, the hinge pin is usually ovaled out and the leaf is cracked at the weld.
Pricing for Gate Repair in Piqua, OH
Here’s what we charge in Piqua, straight up. Hinge and latch repair runs $140 to $280. Gate realignment is $160 to $320 depending on whether we’re straightening a post or re-setting a footing. Weld and rust repair runs $120 to $400, and that includes grinding out the rust, welding in new steel, and repainting the repaired section. Electric gate repair runs $180 to $380 for most opener and control board work on Viking, Ghost Controls, or DoorKing units. A full post re-set near the river, where the old footing has heaved and needs to be dug out and poured fresh, runs $450 to $900. The price you’re quoted is the price you pay, agreed before any work starts. And if you’re over 65 or a veteran, take 10% off any of those numbers. Call (877) 610-2993 and we’ll give you a firm number over the phone.
We Also Serve Cities Near Piqua
If you’re outside Piqua proper, we handle Gate Repair work in Troy, Tipp City, Vandalia, and Englewood, too. Same crew, same 90-Day Done Right Promise, same live person on the phone. We don’t just pass through; we’re here for the whole stretch of Miami County.
Serving Piqua, OH - Our Local Coverage Area
We’re based in the Piqua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Piqua
Yes, in most cases we can repair or retrofit an older automatic gate, though some pre-1990s openers lack the wiring and mounting points for modern safety photocells and edge sensors. If your gate predates current entrapment-protection standards, we’ll tell you exactly what needs to be added to make it safe, and whether the existing operator can support it. In some cases, a new LiftMaster or comparable operator with built-in safety features is the cheaper and safer route. Call (877) 610-2993 and we’ll assess it on site.
Because the hinges are almost never the root cause. The real issue is usually a post that has shifted out of plumb, which transfers all the gate’s weight onto one hinge point and wears it out prematurely. Until the post is re-set, new hinges are just a temporary patch. In Piqua, where freeze-thaw heaving is constant, we always check the post footing before we touch the hinge hardware.
It depends on the condition of the steel itself. A 60-year-old galvanized chain-link gate that has been rusting near the river often has thin walls and cracked welds that make repair a losing game. If the frame is sound, we can weld it and hang it for another decade. If the pipe is rusted through anywhere, replacement is cheaper than piecemeal welding. We’ll show you the damage and let you decide, no pressure either way. Call (877) 610-2993 for an honest assessment.
Yes. Under current safety standards, automatic gates that open or close toward people are required to have entrapment protection, typically in the form of safety photocells, edge sensors, or both. If your older gate lacks these, a service call isn’t just a repair issue, it’s a safety issue, and we can install the sensors or recommend a modern opener that includes them. Never disable or bypass a safety device on an automatic gate.
Floodplain properties near the Great Miami River in Piqua sit in ground that gets saturated and then freezes, and that cycle heaves concrete footings out of alignment over time. On riverside jobs, we routinely find that the original plumb is gone entirely, which means a hinge swap alone would be pointless. We quote full post replacement on those jobs from the start, because anything less means fixing the same gate twice. Call (877) 610-2993 and we’ll tell you what your footing actually needs.
Local Expertise Piqua Can Rely On
Here’s the thing about Piqua that out-of-town gate companies miss entirely: the city’s position along the Great Miami River means a lot of residential and light-industrial properties sit in or near the floodplain. Repeated flood exposure accelerates rust on iron gates, warps wooden gate frames, and heaves concrete post footings through freeze-thaw cycling in a way you just don’t see in drier upland communities in Miami County. We’ve replaced sagging ornamental iron swing gates on 1940s river-adjacent homes where the original operator was long obsolete and the hinge post had drifted so far out of plumb that the gate couldn’t latch. We re-set the post footing, installed a new LiftMaster operator with safety photocells, and the gate swings like it did when the house was young. That’s the kind of repair you get when the person doing the work has seen Piqua’s floodplain patterns for decades.
And if you want to verify who you’re hiring, you can. Hal Gatewood’s name is on the shop, his address is published, and his license number is available for anyone to look up. That’s the oldest accountability there is, and it matters more in a town like Piqua than any review site ever will.
Call Gatewood Fence & Gate for Gate Repair in Piqua
If your gate is sagging, dragging, rusted through, or dead on its post, call (877) 610-2993 now. A live person answers, day or night. We’ll give you a straight price over the phone, no trip charge inside the county, and the 90-Day Done Right Promise in writing on every job. Mention this page when you call and take $40 off any repair over $200.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Piqua since 2001.