Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Piqua
Gate parts and welding in Piqua usually means one of three calls: a hinge post has heaved out of plumb, a weld has cracked under wind load, or a gate flat out won’t latch anymore. We handle all three, and we do the welding on site in your driveway so the gate never leaves your property. Hal Gatewood has been fixing gates since 2001, and the crew that shows up in Piqua will be the one that quoted your price, not a subcontractor. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Piqua’s Preferred Gate Parts & Welding Company
Piqua isn’t a drive-through town for us. We schedule work here deliberately, which means when we tell you a window, we keep it. The person who answers the phone is the same person who will stand in your yard and explain why your hinge post gave out on the latch side. That matters in a place like Piqua, where the housing stock is old, the soil is stubborn, and the river corridor punishes lazy work faster than anywhere else in Miami County.
Every job we take carries the 90-Day Done Right Promise in writing. If the repair doesn’t hold, one call brings us back. No fine print, no runaround. We are locally owned and owner-operated, with a published address and license number anyone can check. Hal Gatewood’s name goes on the invoice because Hal Gatewood is the one standing behind it. And if you want to skip the phone entirely, you can drive to the shop and look him in the eye before you spend a dime.
Piqua homeowners between 50 and 70 have seen the other side of this trade: a national outfit quotes one number on the phone and another at the door. We quote the price before any work starts, in writing, and the price doesn’t change when the crew arrives. Our standing offers are simple, no haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Piqua
Hinge Replacement
On a dry, upland lot, a hinge swap is straightforward. On a Piqua floodplain lot, it’s often a trap. The hinge pins may have corroded, but the real failure is usually the post they’re welded or bolted to. We replace hinge pins, heavy barrel hinges, and weld-on hinge plates, and we always check the post plumb before we touch the hardware. A gate sags in the hinge post, not in the middle, and that is where we start.
Post Replacement
The freeze-thaw cycle in Piqua’s Miami Valley soil ground doesn’t forgive a shallow footing. Late winter and early spring, clay-heavy low-lying lots expand and contract against gate posts until the post twists and the gate misses the latch by half an inch. We cut out the old post, pour a new footing sized for saturated soil, and set the post to true plumb before the gate ever goes back on. Any riverside job we quote assumes full post replacement until we prove otherwise.
Rail Repair
Solid infill gates catch wind like a sail, and Piqua’s older ornamental iron gates in tight alley-access rear yards take the worst of it. The mid-rail welds crack, the bottom rail bows, and eventually the whole frame starts to rack. We cut out the failed section and weld in new rail stock, then reinforce the corner joints so the gate doesn’t tear itself apart again in the next storm.
Custom Welding
Sometimes the gate isn’t broken; it’s just built wrong for the job. We weld custom reinforcement plates, new hinge brackets, wind-rated frame members, and operator mounting points for gates that were never designed for automation. All welding happens on site in Piqua, with the gate in place, so alignment is checked against the actual opening, not a shop bench. If it’s worth welding, it’s worth welding square the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Piqua
We service and weld around the hardware that’s actually installed on Piqua gates, including Gate Parts & Welding work on Linear, Viking, and DoorKing operators. We stock common hinge sizes, drop rods, and roller assemblies for these brands so most repairs in Piqua don’t wait on a parts shipment. Ghost Controls swing arms and Viking control boards are no mystery to the person in your driveway, because the person in your driveway is the one who ordered them.
Common Gate Parts & Welding Problems We See in Piqua Homes
- Seized hinge pins and drop rods after flood exposure. Repeated exposure along the Great Miami River corridor leaves uncoated steel hardware damp for weeks at a stretch, and the pins and rods rust in place until the gate won’t swing or won’t drop into the closed position.
- Heaved post footings on low-lying, clay-heavy lots. Late-winter freeze-thaw cycling through Piqua’s 45356 pushes posts out of plumb slowly, until one morning the gate simply won’t reach the latch. A hinge swap won’t fix it; the post has to come out.
- Wind-racked mid-rail welds on older solid infill gates. Tight rear yards with alley access mean gates get closed hard and hit by wind from odd angles. On 1960s ornamental iron gates in Piqua’s older neighborhoods, the mid-rail weld is often the first thing to fail.
- Sagging latch-side panels on wide double gates. When one leaf of a double gate starts dragging, the whole system gets out of square. In Piqua, we typically find the hinge post has moved, not the panel itself.
Pricing for Gate Parts & Welding in Piqua, OH
A hinge replacement on a standard residential swing gate in Piqua typically runs $180 to $320, depending on whether the hinge plates need to be cut off and rewelded. Full post replacement with a new concrete footing, sized for saturated river-bottom soil, usually lands between $450 and $850 per post. Custom welding work, like welding a new wind-rated frame onto an existing solid infill gate, runs $120 to $400 depending on the linear footage of weld and the thickness of the stock. Rail repair on a cracked mid-rail or bottom rail averages $200 to $500. Every price is quoted and agreed in writing before any work starts, and you can apply the $40 off any repair over $200. Call (877) 610-2993 for an exact quote on your gate; the estimate is free, and there’s no trip charge inside the county.
We Also Serve Cities Near Piqua
Our crew works Piqua and the surrounding Miami County communities every week. If you’re in Troy, Tipp City, Vandalia, or Englewood, the same pricing and the same 90-Day Done Right Promise apply. Same crew, same standards, same live person on the phone.
Serving Piqua, OH - Our Local Coverage Area
We’re based in the Piqua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Piqua
Because the post has moved, not the hinge. Properties along the Great Miami River bottomlands in Piqua sit on saturated, clay-heavy soil that expands and contracts through every freeze-thaw cycle. The post twists out of plumb, and no new hinge will bring the gate back to the latch. We cut out the old post, pour a new footing sized for saturated ground, and set a fresh post to true plumb before any hinge hardware goes on. Call (877) 610-2993 and we’ll tell you which side of that line your gate is on.
Both LiftMaster and FAAC operators have a manual release mechanism: LiftMaster uses a red release handle on the operator arm, and FAAC uses a keyed release or a pull handle depending on the model. Pull the release and the gate will swing free so you can move it by hand. Do not force the gate if the release doesn’t engage; that usually means the mechanism itself has corroded, which we see regularly on Piqua riverside lots. If you’re not certain where your release is, call (877) 610-2993 and we’ll walk you through it over the phone.
Almost always just a repair. The sag is coming from the hinge post, not the panel. In Piqua’s older homes built between the 1910s and 1950s, the original posts are often 60 to 80 years old and sitting in footings that were never sized for this soil. We inspect the post plumb, and if the post is sound, we’ll weld on new heavy-barrel hinges and bring the gate back square. If the post has moved, we replace the post. A full new gate is rarely the right call, and we’ll tell you that plainly. Call (877) 610-2993 for a free assessment.
Yes. We weld new top and bottom rails, corner gussets, and hinge reinforcement plates directly onto the existing gate, in place, without removing it from the property. On a solid infill gate that catches Piqua’s wind, we add a mid-rail or diagonal brace so the frame holds its square through the next storm. The welding is done on site, and the price is agreed before the welder strikes an arc. Call (877) 610-2993 and we’ll measure it and price it.
Yes. Any automatic gate operator in Ohio should have entrapment protection: photo eyes, safety edges, or both, depending on the operator and the gate travel. Many older installations in Piqua’s housing stock predate current safety standards, and we routinely find gates that will close on a person or a vehicle with nothing to stop them. This is a safety hazard, not a cosmetic issue, and it’s one of the first things we check on any operator service call. We’ll quote the correct safety edges for your gate and operator before any repair work begins. Call (877) 610-2993 if your gate has ever closed on something it shouldn’t have.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Piqua since 2001.