Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pinewood
If your gate in Pinewood won’t open, sags on its hinges, or grinds halfway across the track, the fix usually starts with the post, not the panel. We work on gates all over the 33167 zip code, and most repair calls get answered by a live person the first time you dial (877) 610-2993. Gatewood Fence & Gate has been owner-operated since 2001, and the person who quotes your repair is the same person who stands behind it. That matters in Pinewood, where unincorporated Miami-Dade codes mean a gate repair is never just a gate repair.
Why Gatewood Fence & Gate Is Pinewood’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001, and his name is on every invoice. We’re not a franchise with a rotating cast of subcontractors. When you call about a sagging gate off NW 103rd Street or a dead operator near NW 79th Street, you’ll talk to us, not a call center three states away. We know Pinewood’s housing stock: modest CBS block homes from the 1950s through the 1970s, nearly all of them with swing gates hung on posts that were set before anyone thought about Miami-Dade’s wind-load standards. We also know the soil. Thin, seasonally saturated fill. That’s why posts heave, why hinges tear loose, and why a gate that worked fine in April binds by August.
We answer the phone 24 hours a day, seven days a week. Not a voicemail, not a chatbot. A live person. And when we show up, the price was already agreed before any work starts. Pinewood homeowners have been burned by national outfits that quote one number on the phone and hand over an invoice with a different number at the door. That’s not how we do business, and we’ll put that in writing.
Our Gate Repair Services in Pinewood
Our Gate Repair team handles everything from a welded crack in a tubular steel frame to a full operator retrofit. Here’s what we see most in Pinewood.
Electric Gate Repair
Electric gates in Pinewood live hard. Standing storm runoff pools around the base of operator posts for days after a summer downpour, and salt-laden humidity off Biscayne Bay works its way into every motor housing, control board, and limit switch. We repair operators from Viking, Ghost Controls, DoorKing, and Elite, and we keep common control boards and receiver parts on the truck so we’re not driving back and forth across Miami-Dade for a capacitor. If your operator hums but doesn’t move, or opens and immediately reverses, the fix is usually a limit switch or a gear assembly, not a whole new unit.
Automatic Gate Repair
Pre-UL 325 operators are common in Pinewood. That’s the federal entrapment safety standard that requires working photo-eyes, edge sensors, and force settings that won’t hurt a person or a kid on a bike. Many older operators still running in Pinewood have none of that, or the sensors got disconnected years ago and never reconnected. We can often retrofit safety photocells onto an older operator, but when the board is so old it won’t accept them, the honest answer is replacement. We’ll tell you that before we start, not after.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. On a 1968 CBS home off NW 103rd Street, we found the swing gate’s hinge plates had corroded through the stucco pilaster completely. The surface looked fine, but the gate was hanging on rust and paint. We cut out the failed anchors, set new galvanized hinge posts in fresh concrete, and hung the gate plumb. If you’re thinking about welding a brace across the middle of a sagging gate, that treats the symptom. Fix the post and you’ll fix it once.
Gate Realignment
In Pinewood’s flat, low-lying lots, a post can heave a half inch over one wet season. A half inch at the post becomes two or three inches at the latch, and then the gate won’t catch. We realign gates by resetting posts and shimming hinges, not by bending the frame. Bending a steel gate back into shape work-hardens the metal and makes the next repair worse. Realignment is usually a same-visit job, and it’s one of the cheapest fixes we do that prevents a much bigger one down the line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
We’re certified to work on nine major gate brands, but in Pinewood we see Viking, Ghost Controls, and DoorKing more than anything else. Older DoorKing units from the 1990s are still running all over this neighborhood, and most of them just need a new battery, new limit switches, and a little attention to keep going. We carry brand parts in the truck, not generic substitutes, and we’ll tell you when a name-brand part is worth the money and when a aftermarket equivalent does the same job for less. No lecture, just the facts.
Common Gate Repair Problems We See in Pinewood Homes
- Spalled and heaved gate posts. Original post anchors set decades ago in Pinewood’s thin, seasonally saturated fill soil have cracked, shifted, or rotted out. The gate binds on the hinge post, and every rainy season makes it worse.
- Corroded base welds on tubular ornamental steel. Storm runoff sits around gate posts longer here than in drier inland cities, so the bottom rail of the gate rusts from the inside out. By the time you see the brown stain, the metal behind it is usually thin enough to poke through with a screwdriver.
- Dead or unsafe pre-UL 325 operators. Older swing and slide gate operators in Pinewood frequently have no working photo-eyes or edge sensors. That’s an entrapment hazard and a code violation under current standards, and it needs to be addressed before someone gets hurt.
- Masonry anchor plates that have rusted through inside the stucco. The stucco looks intact, but the embed behind it is gone. The gate is effectively hanging on rust and paint. This is one of the most common things we find on 1950s and 1960s CBS homes in Pinewood.
Pricing for Gate Repair in Pinewood, FL
Gate repair pricing in Pinewood depends on what failed and how far it has gone. Hinge and post repairs, including resetting a post in new concrete, typically run $250 to $500. Gate realignment is usually $150 to $300. Weld repairs on a steel frame fall between $180 and $400 depending on how much rusted material we have to cut out. Electric operator repairs run $200 to $600, and a full operator retrofit with new safety photocells lands between $900 and $1,800. Every price is quoted and agreed before any work starts, and we offer $40 off any repair over $200, plus a free second opinion on any written estimate you’ve received from another company. No trip charge inside the county.
We Also Serve Cities Near Pinewood
If you’re in Westview, Opa-locka, Gladeview, or West Little River, we cover you too. The same live-answer phone, the same 90-Day Done Right Promise, the same crew. We also handle Gate Repair in Pinewood for homeowners throughout 33167 and the surrounding blocks. Same truck, same standards.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pinewood
For most component repairs, no. If we’re replacing an operator, a hinge, a post, or a section of welded steel, that’s maintenance, not construction. But because Pinewood is unincorporated Miami-Dade County, any gate replacement above basic thresholds triggers the county’s post-Hurricane Andrew building code: a Notice of Acceptance (NOA) product approval and a permit are mandatory. That layer of compliance does not exist to the same degree across the county line in Broward. If your repair crosses into replacement territory, we’ll handle the paperwork and tell you exactly what it means before you spend a dollar. Call (877) 610-2993 and we’ll walk you through it. Estimates are free.
The original post anchors were set in thin, seasonally saturated fill soil, and after decades of wet-season soaking and dry-season shrinking, the concrete footing has shifted or cracked. Heaving is worse in Pinewood’s flat, low-lying interior lots where storm runoff pools around the posts for days. It can’t be fixed by adding more concrete on top. The post has to be pulled, the hole re-dug, and new galvanized anchors set below the saturation line. Done right, it stays plumb. Call us for an exact quote; the estimate is free, and we’ll show you photos of what we found before we pour anything.
Sometimes, yes. If the operator has a control board that accepts external photocell inputs, we can add photo-eyes and edge sensors to meet UL 325 entrapment rules. We’ve done that on plenty of older DoorKing and Viking units in Pinewood. But if the board is too old to accept them, or the motor draws more current than it should after decades of salt-humidity exposure, retrofitting is throwing good money after bad. We’ll give you a straight answer either way, and the price is agreed before any work starts.
The hinge plate has likely corroded through the masonry anchor inside the pilaster. On CBS construction, that means the anchor embed has rusted out while the stucco skin still looks solid. It’s common on 1950s and 1960s homes in Pinewood, especially where the pilaster faces a lawn sprinkler or takes direct splash from summer storms. We cut out the failed anchors and set new galvanized hinge posts in fresh concrete, then re-hang the gate plumb. Call (877) 610-2993 for a free estimate on the fix.
The humidity carried inland from Biscayne Bay picks up salt, and that salt settles on every piece of exposed hardware, especially motor housings, hinge pins, and base welds. Combined with the standing storm runoff that pools in Pinewood’s flat lots, that’s why a gate that looks fine from five feet away is often rusted through at the base. We recommend anti-corrosion treatment on all weld repairs in this area, and we use galvanized or stainless hardware on any part that touches the ground. Stop by or call, and we’ll show you what 30 years of that Florida salt air does to a gate.
Call Gatewood Fence & Gate for Gate Repair in Pinewood
If your gate is sagging, stuck, grinding, or just ignoring the remote, call us. You’ll get a live person at (877) 610-2993, a straight answer about what’s wrong, and a price you can hold us to. Every repair carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround, no fine print, no invoice bigger than the quote. We’re located right here in South FL and we show up when we say we will.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pinewood since 2001.