Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pinewood
Gate parts and welding in Pinewood is not a side job for us. It is what we have done since 2001, and most of the work we do here comes down to one thing: the gate you already own can usually be fixed. On this page, you’ll find honest pricing for hinge replacement, post replacement, rail repair, and custom welding in Pinewood’s market, plus the local code reality most companies won’t mention until the inspector shows up. If your gate sags, drags, or will not latch, call (877) 610-2993 and you’ll get Hal or someone from his crew, not a voicemail tree.
If you are near NW 76th Street, NW 79th Avenue, or anywhere inside the 33167 zip code, we know the streets you drive. We know the CBS homes from the 1950s through 1970s that dominate Pinewood, and we know exactly what the thin, saturated fill soil under this neighborhood does to a gate post over 40 or 50 years. A live person answers every call, 24 hours a day, 7 days a week. And the 90-Day Done Right Promise is in writing on every job we do in Pinewood.
Key takeaways for Pinewood homeowners:
- Gate post replacement in Pinewood almost always carries a Miami-Dade NOA and permit requirement because we sit in unincorporated county land under post-Hurricane Andrew wind-load codes.
- Hinge replacement on a CBS pilaster frequently reveals a corroded anchor plate even when the stucco above looks fine.
- Pinewood’s flat, low-lying lots and Biscayne Bay humidity corrode base welds and gate hardware faster than you expect.
- We weld on site. The gate stays in your driveway. You are not hauling a 300-pound steel leaf to some warehouse across the county.
- $40 off any repair over $200, no trip charge inside Miami-Dade, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is Pinewood’s Preferred Gate Parts & Welding Company
Hal Gatewood put his name on the shop because he means it. He has been fixing gates in South Florida since 2001, and the name on your invoice is the same name on the truck that pulls into your driveway in Pinewood. We are locally owned and owner-operated, with a published address and a license number anyone can verify. You will not get a national franchise that sends a different person every time and quotes one price on the phone before charging another at the door.
Pinewood customers call us because they have already been burned by that. A retired couple off NW 80th Street told us a national outfit quoted $280 for a gate roller job and handed them a $730 bill when the tech arrived. That does not happen with us. The price is quoted and agreed before any work starts. Every time. On site. On the phone. In writing if you want it.
Our response to Pinewood is measured in the time it takes to drive there from our South Florida metro office. We schedule real windows, not “sometime between 8 and 6.” Hal or a background-checked, uniformed member of his crew shows up with a welder, fresh hinge stock, and the hardware that actually fits your gate, whether it is a FAAC hydraulic operator on a swing gate or a Viking arm on a sliding gate off NW 75th Place.
Our Gate Parts & Welding Services in Pinewood
Hinge Replacement
Most hinge failures in Pinewood are not the hinge barrel itself. They are the anchor plate behind it, rusted completely through inside the stucco of a CBS pilaster. We cut out the old embed, weld a new galvanized anchor plate to fresh rebar, and remount the hinge so the gate swings on something structural instead of rust and paint. A typical hinge replacement on a Pinewood swing gate runs $150 to $420 depending on whether we are replacing one leaf or both and how far back the corrosion runs.
Post Replacement
Pinewood sits on thin, seasonally saturated fill. When summer storms pool water around a gate post, the footing heaves and the post leans. The gate goes out of plumb, the latch misses the strike, and the whole thing binds. We dig the old footing, set a new galvanized or powder-coated post in high-strength concrete with a drainage weep, and rehang the existing gate if it is still sound. Post replacement in Pinewood typically runs $380 to $900 per post, including the footing and the weld work to reattach the gate frame. On swing gates, expect a Miami-Dade NOA approval and permit on top of that, which we handle as part of the job.
Rail Repair
A sagging gate usually tells you the rail is fine and the hinge post is the problem. But sometimes the rail itself has separated from the post at the base weld, corroded from storm runoff pooling around the bottom rail. We true the rail, cut out the corroded section, weld in new matching tubing, and retension the gate so it does not drag across the driveway. Rail repair in Pinewood runs $120 to $380 depending on the length of rail and whether we need to reinforce an internal sleeve.
Custom Welding
Some gates in Pinewood were built 50 years ago and the original fabricator is long gone. We fabricate replacement hinges, latch plates, extended brackets, and entire gate leaves on site. If you need a wider opening for a work truck or an extra mid-rail for a dog that keeps squeezing through, we measure, fabricate, and weld it while the gate stays in your driveway. Custom welding in Pinewood runs $95 to $250 per hour plus materials, with a written quote before the rod ever strikes.
Every one of these jobs falls under our Gate Parts & Welding service, and every one is covered by the 90-Day Done Right Promise. If it is not right, we come back. No runaround.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
We are certified to service nine major gate brands, and in Pinewood we see a lot of FAAC hydraulic swing operators, BFT underground units on driveway gates, and Linear and Viking arms on the sliding gates along the wider lots. We stock common hinge pins, rollers, weld plates, and operator parts locally, so when a FAAC piston loses pressure or a Viking arm strips a gear, you are not waiting a week on a drop ship. Because Pinewood gate work already carries extra code documentation, the last thing you need is a parts delay on top of the permit. Call (877) 610-2993 and tell us the brand on your operator. We will know what we are walking into.
Common Gate Parts & Welding Problems We See in Pinewood Homes
- Heaved post footings on swing gates. Pinewood’s flat lots and thin fill soil hold water after every summer storm. The ground swells, the footing shifts, and the gate drops just enough that the latch will not catch.
- Corroded anchor plates behind intact stucco. The pilaster looks perfect from the street. Behind it, the steel embed has turned to rust scale, and the gate is hanging on paint and habit.
- Base welds failing from standing water. Because runoff pools around gate posts in Pinewood’s low-lying blocks, the bottom rail separates from the post at the weld line while the upper sections still look straight.
- Motor housings corroding from Biscayne Bay humidity. Salt-laden air carried inland eats through the seams on gate operator housings faster than it does in drier parts of Florida, and Pinewood gets the worst of both: water at the base and salt in the air.
Pricing for Gate Parts & Welding in Pinewood, FL
Here are straight numbers for Pinewood’s market, not a “call for a surprise.” Hinge replacement runs $150 to $420. Post replacement runs $380 to $900 per post. Rail repair runs $120 to $380. Custom welding runs $95 to $250 per hour plus materials. A full gate leaf fabrication and hang on a tubular steel driveway gate in Pinewood typically lands between $900 and $1,800 including hinges, latch, and the weld work.
What moves the number is the condition of the footing, how far the corrosion runs into the pilaster, and whether Miami-Dade’s NOA and permit requirement applies to your specific job. We quote that before any work starts, and we do not come back at the door with a bigger number. The estimate is free. The second opinion on anyone’s written estimate is also free.
We Also Serve Cities Near Pinewood
We run jobs through Pinewood and into the surrounding corners of Miami-Dade, including Westview, Opa-locka, Gladeview, and West Little River. If you live off NW 79th Avenue or closer to the Opa-locka side, you are still easily inside our service area, and the no trip charge inside the county applies to you just the same.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pinewood
In practice, yes. Pinewood is unincorporated Miami-Dade County, so structural changes to a gate post, footing, or anchored weld fall under post-Hurricane Andrew wind-load codes, which require a county Notice of Acceptance (NOA) product approval and a permit on most replacements. There are narrow exceptions for minor hardware swaps that do not touch the structure, but if you are pulling a post or re-anchoring a hinge plate, expect documentation. We handle the NOA check and permitting as part of the job. Call (877) 610-2993 and we will tell you exactly what your specific gate needs before you commit.
Two factors hit Pinewood harder than most of Broward. First, the low, flat lots hold storm runoff around gate posts far longer than the better-drained coastal strips, so the base weld soaks. Second, salt-laden Biscayne Bay humidity carried inland accelerates corrosion on exposed steel surfaces and motor housings. Broward’s east side gets salt air too, but it does not get the same standing freshwater pooling that keeps the corrosion active down at the footing. A galvanized post with a proper drainage weep is not optional here, and we set every one we install that way.
Yes, and in Pinewood that is the most common hinge repair we do. We cut out the corroded embed, expose fresh rebar, weld a new galvanized anchor plate to rebar with full penetration, and patch the stucco to match. The pillar stays. The gate gets a structural connection again. If the block behind the stucco is too cracked from the rust jacking, we core and epoxy-set new threaded anchors instead of relying on a surface weld. We will tell you which one your pilaster needs after the first cut, and the price is agreed before the grinder comes out.
Often the battery in Pinewood, and here is the local reason: salt-laden humidity from Biscayne Bay corrodes battery terminals and tray contacts faster than the panel ever fades. The panel may be producing fine voltage while the battery cannot hold a charge through one night of use. We test the array output, load-test the battery, and check the tray and wiring for corrosion before we sell anyone a new part. If you are off NW 79th Avenue with a long driveway and no easy mains power, a properly sized deep-cycle battery and sealed tray usually fixes it. Call (877) 610-2993 and describe the symptom. We’ll tell you over the phone whether it sounds like a panel, battery, or the operator board itself.
If we set a new post and rehang the gate, we true the gate to the new post as part of the job. That includes correcting the sag, re-aligning the latch, and adjusting the rail level. You do not pay a separate rail repair line item for work that is required to hang the gate properly. If the rail itself is rotted or cracked beyond what rehanging can fix, we will tell you and quote that section separately before any work starts. The 90-Day Done Right Promise covers it all, in writing.
One More Thing About Gate Work in Pinewood
Here is what nobody else in the gate business will tell you until the inspector is standing in your driveway: Pinewood sits in unincorporated Miami-Dade County, which means every structural gate post replacement and most welded hinge anchors fall under post-Hurricane Andrew wind-load codes. Broward County, just north, does not impose the same NOA product approval and permit layer on this kind of work. So a gate company that quotes a fast cheap post swap in Pinewood is either ignoring the code or planning to hit you with the permit cost as a “surprise” after the hole is dug. We do not do that. We pull the NOA documentation up front, we pull the permit, and the quote you get includes the work and the paperwork. The metal is usually the easy part. The county record is what actually keeps a gate legal on an unincorporated parcel.
We have watched this play out enough times to spot the warning signs before the gate is even off the hinges. On NW 76th Street, our crew pulled a sagging swing gate off a 1960s CBS pilaster and found the hinge post anchor plate rusted completely through the stucco. The gate was hanging on rust and paint. We cut the old embed, welded a new galvanized anchor plate to fresh rebar, set the post footing in high-strength concrete with a drainage weep, and remounted a LiftMaster swing gate operator with a safety photocell. The gate swings true through Pinewood’s summer downpours now, and that foot has not shifted. That is the difference between repairing a gate and actually fixing it.
Call Gatewood Fence & Gate for Pinewood Gate Parts & Welding
If your gate sags, drags, will not latch, or swings on a hinge that has been there since the Eisenhower administration, call us at (877) 610-2993 for a free estimate. The price is quoted and agreed before any work starts. No trip charge inside Miami-Dade. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Hal Gatewood’s name is on the shop, and the shop is just a phone call away. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pinewood and surrounding Miami-Dade communities since 2001.