Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pelham
Gate parts and welding in Pelham usually comes down to one question: can the original gate be saved, or is it time to scrap it? In most of the houses we work on here, the answer is save it. A 1920s wrought-iron gate hanging on original hinges can almost always be re-welded, re-hung, and put back into service for far less than a replacement costs. The trick is knowing where the failure actually started, and that starts with the post, not the panel. Hal Gatewood has been repairing gates since 2001, and when a Pelham homeowner calls (877) 610-2993, they get a live person who knows the difference between a hinge weld that failed from rust and one that failed because the post shifted in a freeze-thaw cycle.
We work all over the 10803 ZIP and the surrounding streets, from the old commuter blocks near the Pelham station out to the quieter lanes by the Hutchinson River. Pelham’s gates are a particular kind of job: older than most, built for a commuter lifestyle, and holding up under coastal air that punishes ferrous metal harder than towns ten miles inland. That is exactly what we are set up for.
Why Gatewood Fence & Gate Is Pelham’s Preferred Gate Parts & Welding Company
We are not a franchise. Hal Gatewood owns the shop, his name is on every invoice, and the address is published so any Pelham homeowner can drive to it and look him in the eye. That matters because a lot of gates in this town have been serviced, incorrectly, by out-of-area crews that do not understand what a bluestone pilaster does to anchor hardware. We do.
The person who shows up to your house in Pelham is not a rotating subcontractor. It is Hal or a member of his crew, background-checked and uniformed, driving from the New York City metro office to get to Pelham quickly. Same-day service is common for hinge and latch failures when we are already in Westchester, and every job is quoted and agreed to before any work starts. No surprises when the invoice comes.
Every job carries the 90-Day Done Right Promise in writing, plain and unhedged. If something we welded or re-hung is not right, one call brings us back. That is not a warranty buried in fine print. It is a sentence Hal puts on the paperwork.
Our Gate Parts & Welding Services in Pelham
The Gate Parts & Welding side of our business covers the whole range: hinge work, post work, rail repair, and custom fabrication. In Pelham, hinge replacement and custom welding are the most common calls, followed by post re-setting in late winter. Here is how we handle each one.
Hinge Replacement
Hinge failure on an old iron gate in Pelham is rarely just the hinge. It is the hinge plus the post plus the anchor, working together. We replace the hinge, but we also check that the post is still solid and the anchor has not pulled loose from the original stone or brick. If the old hinge was welded to a plate and the plate is rusting through, we cut it off and weld a new plate to spec. Standard surface-mount hinges from a box store will not hold on an original pilaster, and we tell you that plainly.
Post Replacement
Pelham’s freeze-thaw cycles ruin gate posts. A post set in a shallow footing will heave out of plumb by March, and every gate hanging from it sags or scrapes. We dig out the old footing, re-set a new post deeper, and pour fresh concrete. If the post is steel and rusted through at the base, we replace the steel and weld the hinge plates to match. If it is wood and rotted at the footing from years of salt air, we replace the post and re-hang the gate on the same day.
Rail Repair
Rails on a typical Pelham iron gate are not as thick as you think. Salt-laden air from Pelham Bay works at the bottom rail and the hinge-side stile, and after forty or fifty years, a rail that looks okay from the street can be paper-thin. We cut out the rotted section, weld in a new section, and grind it down so the repair does not look like a patch. If the damage is too extensive, we tell you that honestly rather than charging you for a repair that will fail.
Custom Welding
This is the service that separates a Pelham job from a standard one anywhere else. Original pilasters on pre-1940 homes will not accept off-the-shelf hinge brackets. We fabricate brackets to match the existing stone or brick, weld them to the gate, and anchor them properly. On a 1920s Colonial near the Pelham station, we rebuilt the hinge post for a sagging wrought-iron swing gate whose original post had rotted at the footing from decades of salt air off Long Island Sound. We re-set a new post in a deeper concrete footing, custom-welded hinge plates to match the existing pilasters, and retrofitted the old LiftMaster operator with a new safety photocell, saving the client a full gate replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham
We are certified to service nine major gate brands, and in Pelham we see a lot of Linear, Ghost Controls, and Viking operators on older gates, along with legacy LiftMaster units on pre-war homes. We keep common parts stocked so we can often repair the opener the same visit. If you have a brand from before 2000 that is still limping along, we are the ones who will actually try to keep it alive rather than telling you to buy a new one.
Common Gate Parts & Welding Problems We See in Pelham Homes
- Rust-through at hinge welds on pre-war iron gates. Salt-laden air from Pelham Bay and the Sound works at the weld line faster than inland Westchester, and the hinge heals fail before the gate panel itself shows rust. Welding a new hinge plate on is almost always the fix.
- Posts heaving out of plumb by late winter. Twenty to thirty freeze-thaw cycles a year expand the soil under shallow footings, and by March the gate scrapes the ground. We re-set the post deeper and re-hang the gate.
- Hinge anchors pulling loose from original bluestone coping. Standard surface-mount hardware does not have enough embedment in old stone, so we fabricate custom brackets that spread the load.
- Legacy operators that still work but lack modern safety edges. Many Pelham gates pre-date the 1993 UL 325 safety requirement. We retrofit photocells and edges onto older LiftMaster, Viking, and Linear operators so the gate meets current safety standards without a full replacement.
Pricing for Gate Parts & Welding in Pelham, NY
Here is what you can expect to pay in Pelham’s market. Gate hinge replacement on a standard wrought-iron gate runs $225 to $400 per hinge, including the weld and finish work. Post replacement with a new steel post and deeper concrete footing typically runs $600 to $1,100 depending on whether the old footing must be jackhammered out. Rail repair runs $180 to $350 per section. Custom bracket fabrication for a bluestone or brick pilaster runs $250 to $500 per bracket, and that is the piece out-of-area contractors do not tell you about until they are standing in your driveway. Full gate re-hanging with hinge work and post re-setting on a typical Pelham property runs $800 to $1,500.
We quote every job before we start, and that number does not change. We also have standing offers that do not require haggling: $40 off any repair over $200, a free second opinion on any written estimate you have, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on any of the above.
We Also Serve Cities Near Pelham
If you are outside the 10803 ZIP, we work throughout the neighboring communities, including Pelham Manor, Mount Vernon, New Rochelle, and Baychester. If your gate is on the Pelham Manor side of the line or just down in New Rochelle, the same crew, the same pricing, and the same 90-Day Done Right Promise apply.
Serving Pelham, NY - Our Local Coverage Area
We’re based in the Pelham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pelham
Because the hinge was replaced without fixing the post or the anchor. On Pelham’s pre-war homes, the original hinge anchors sit in bluestone coping or brick pilasters that cannot hold a standard surface-mount screw under load. When the hinge fails again, it is not the new hinge, it is the anchor pulling loose. We replace the hinge and the anchor together, with custom brackets when the pilaster requires it. Call (877) 610-2993 and we will look at the post, not just the hinge.
Yes, in most cases. We weld in place rather than hauling the gate to a shop, which keeps your gate on its hinges and saves you the cost of a crane. If the rust has eaten through enough metal that the weld would not hold, we tell you before we cut, not after. Call (877) 610-2993 and describe the rust, or send a photo, and we will give you an honest read on what can be welded.
Usually yes. We retrofit old LiftMaster operators regularly in Pelham, adding modern safety photocells and edges while keeping the motor and arm. If the control board is obsolete and cannot be rebuilt, we will say so plainly and quote you a retrofit rather than a whole gate replacement. Call (877) 610-2993 and tell us the model number, and we will tell you what is still serviceable.
Freeze-thaw heave. The soil under your gate post absorbs water, freezes, expands, and thaws again, and over a season that lifts a shallow footing just enough to throw the gate out of plumb. By late March, it scrapes. We re-set the post in a deeper footing below the frost line and re-hang the gate. It is the single most predictable repair call we get in Pelham between March and April. Call (877) 610-2993 for a free post inspection.
Yes. We fabricate brackets to match the existing stone, weld them to the gate, and anchor them so the load is spread across the pilaster face. We have done this on dozens of Pelham homes with original bluestone and brick, and the result looks like it was always there. Call (877) 610-2993 for a free estimate on custom bracket fabrication.
Contact Gatewood Fence & Gate in Pelham
If your gate is sagging, rusting through at the hinge, or the opener is older than your kids, call us before you call a company that wants to sell you a whole new gate. We repair first, weld on site, and stand behind the work with the 90-Day Done Right Promise. The name is on the shop, and the shop is not going anywhere. Call (877) 610-2993 for a free estimate, or for a second opinion on any written quote you have already received.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelham since 2001.