Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Palm Beach
Gate repair in Palm Beach means dealing with two fronts of salt air, ornate ironwork, and automation that most mainland companies never see. We work on gates along the ocean side and the Intracoastal side of the island, and we understand what that double exposure does to a control board or a hinge post. When your gate stops opening on South Ocean Boulevard or a mid-century estate off North Lake Way, you need someone who can weld on site, match the existing iron, and get the operator talking to the intercom again. Call (877) 610-2993 and you’ll get a live person, day or night, not a voicemail.
We answer the phone ourselves. Hal Gatewood has been at this since 2001, and the name’s on the shop. That’s the kind of accountability Palm Beach homeowners expect when the gate won’t close and the house is wide open to Worth Avenue foot traffic.
Why Gatewood Fence & Gate Is Palm Beach’s Preferred Gate Repair Company
A gate that won’t close on Palm Beach isn’t a weekend project. It’s a security hole on a property where the art on the walls costs more than most cars. We’ve repaired gates on Mizner-era estates where the original ironwork is older than the Town’s current code, and we’ve replaced controllers on contemporary oceanfront homes where the salt has eaten the board in under three years. The person who shows up is background-checked and uniformed, and the work carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
We don’t swap a whole operator when a sealed relay or a fresh photoelectric edge would do the job. Hal’s philosophy is simple: fix the gate in your driveway, not at some shop across the county. We weld on site, we reset posts on site, and we stand behind every repair with a name you can look up and an address that’s published. Not a call center. Not a dispatcher three states away. A live person answers the phone at 2 a.m. when a hurricane band knocks out your gate and you need it secured before the next squall hits.
Our Gate Repair Services in Palm Beach
Our Gate Repair crews handle the full spectrum on the island. Here’s what we do most weeks, and how Palm Beach conditions shape the work.
Electric Gate Repair
Electric gate repair in Palm Beach usually starts with a control board that salt humidity has quietly destroyed. Manufacturers rate their boards for inland service intervals, but on this barrier island we see failures in two to three years. We troubleshoot the board, the transformer, the loop detectors, and the safety edges as one system because on this island they fail as one system. If your gate opens but won’t close, or the intercom buzzes but the gate ignores it, call us before the next rain drives more salt into the connections.
Automatic Gate Repair
Automatic gate repair on heavy ornamental estate gates comes down to alignment first, electronics second. A gate that’s been hammered by hurricane wind loads will be out of plumb, and no new motor will hold if the rack and pinion is skipping teeth. We realign the gate, reset the post if the footing has shifted, and only then do we touch the operator. Salt-rated loop detectors and sealed enclosures make the difference between a repair that lasts one season and one that lasts years on Palm Beach.
Hinge & Post Repair
A sagging gate sags in the hinge post, not in the middle. That’s where we start every time. On Palm Beach’s older estates, the original posts may be eighty or ninety years old, set in concrete that predates modern compaction standards. The salt air has been working on the base of those posts for decades. We dig, we reset with new concrete, and we weld reinforcement plates where the post meets the gate frame. Then we rehang the gate so it swings true and the operator stops fighting the load.
Gate Realignment
After a season of tropical storms, gates on Palm Beach shift. A quarter inch at the post becomes a full inch at the latch, and the gate starts dragging or jamming halfway through its travel. Realignment isn’t just cosmetic. A misaligned gate overloads the operator gearbox, burns out motors, and trips the entrapment sensors randomly. We use string lines and laser levels to bring the gate back to factory geometry, then lock everything down so the next nor’easter doesn’t undo the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
We service Linear and Viking operators constantly on the island, plus DoorKing and Ghost Controls on the newer installs. The key isn’t just knowing the brand, it’s knowing which parts survive Palm Beach’s salt environment and which ones don’t. We stock salt-rated relays, sealed edge sensors, and UL 325-compliant retrofit kits locally, so when your Linear board fails on a Tuesday we’re not waiting a week on a part from California. If you’ve got a Viking on an Intracoastal-facing gate, we already know what the salt’s been doing to the gearbox and we bring the right parts on the first trip.
Common Gate Repair Problems We See in Palm Beach Homes
- Corroded control boards from double-sided salt air. The Atlantic on one side, the Intracoastal on the other. That’s two sources of salt-laden humidity attacking your operator from both directions. We replace boards with sealed units and dielectric grease on every connection.
- Post shift from hurricane wind loads. Heavy ornamental iron gates become sails in a tropical storm. The frame bends, the post leans, and the operator starts grinding. We reset the post and realign the gate before any motor work goes in.
- Obsolete pre-UL 325 operators without entrapment protection. Many 1990s estate gates in Palm Beach still run on operators that predate modern safety standards. We retrofit these with photo eyes, edge sensors, and new control boards rather than tearing out the whole system.
- Failed loop detectors near saltwater pools and irrigation lines. Loop detectors buried near the Intracoastal or near salt-chlorinated pool decking fail early. We dig and replace them with sealed, salt-rated units that won’t false-trip when the sprinklers run.
Pricing for Gate Repair in Palm Beach, FL
A typical hinge and post repair on a standard estate gate in Palm Beach runs $350 to $750, depending on whether the post needs a full reset or just shimming. Control board replacement on a Linear or Viking operator: $280 to $520 for the board, plus labor. A full gate realignment after storm damage usually lands between $400 and $900 if the post footing is intact. Weld and rust repair on ornamental iron starts around $250 and climbs with the amount of fabrication. Every price is quoted and agreed before we pick up a tool. You’ll get a written number, and that’s the number on the invoice. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. For an exact quote, call (877) 610-2993. Estimates are free.
We Also Serve Cities Near Palm Beach
We’re in Palm Beach nearly every day, but the same crew handles gate repair in West Gate, West Palm Beach, Riviera Beach, and Lake Park. If your property sits on the mainland side of the Intracoastal or just north of the inlet, we’re already in the area and can route to you on the same trip. The island’s salt problem follows the bridges west, and so do we.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Palm Beach
Palm Beach is a narrow barrier island with the Atlantic on one side and the Intracoastal Waterway on the other, so every gate is hit with salt air from two directions at once. That doubles the corrosion rate on control boards, gearboxes, and hinge hardware compared to mainland towns like West Palm Beach. We see operator control boards fail in two to three years here, roughly half the manufacturer’s inland service interval. The fix is using salt-rated components and sealing every connection, which is what we do on every repair on the island. Call (877) 610-2993 and we’ll tell you what’s actually worth replacing.
In most cases, yes. A pre-2000 LiftMaster or Viking operator can be retrofitted with a UL 325-compliant control board, new photo eyes, and sealed edge sensors without touching the gate itself. We’ve done this on Mizner-era estates where the ornamental iron is original and the owners won’t consider altering it. The operator gets modern entrapment protection, the gate keeps its character, and the cost runs substantially less than a full replacement. If the original operator is beyond retrofit, we’ll tell you straight and show you the numbers for both paths before you spend a dime.
No, and anyone who tells you it will is guessing. A gate that drags has a post problem, not just a hinge problem. The hinge post has shifted in its footing, and the gate’s weight is now loading the bottom hinge and the latch side of the frame. Fix the panel without the post and you’ll fix it twice. We reset the post in new concrete, rehang the gate on new hinges if the old ones are galled from the salt, and realign the whole assembly so the operator isn’t fighting the load. That’s the repair that lasts. Call (877) 610-2993 for an honest assessment.
ARCOM reviews exterior modifications and replacements, not routine in-kind repairs. If we’re welding a crack in the existing iron, replacing a control board, or resetting a post with the same materials and appearance, no ARCOM review is needed. A full gate replacement, or any change to the gate’s design, materials, or height, may require design approval before work begins, especially on a landmarked or historically significant estate. We flag this before any work starts so you don’t end up with a stop-work order and an angry neighbor on the Architectural Commission.
The gate is out of alignment, and the motor is running but the gate can’t travel its full path. Hurricane wind loads bend the frame just enough that the gate binds partway through its swing, and any motor repair done before realignment is wasted effort. We’ve reset dozens of Palm Beach gates after storms, and the sequence is always the same: post, hinges, alignment, then operator. The 90-Day Done Right Promise covers the whole job if it needs a follow-up adjustment after the next storm. For emergency service after a storm, call (877) 610-2993 and a live person will answer.
Get Your Palm Beach Gate Fixed Today
If your gate is jammed, sagging, or stuck open on Palm Beach, don’t let another salt-air rain drive more corrosion into the control board. We answer the phone around the clock, we come to the island every day, and we’ll give you a written price before any work starts. Hal Gatewood has been at this since 2001, and he’s the one you’ll talk to. Call (877) 610-2993 for a free estimate, and we’ll get your gate closing right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Palm Beach, FL.