Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Palm Beach
Gate parts and welding in Palm Beach usually means one of three things: a hinge that finally let go, a post that’s moved out of square, or a rail that needs real metalwork instead of a patch. Most jobs on the island run $180 to $650 for parts and labor, with custom welding at the higher end. We’re Gatewood Fence & Gate, and we’ve been welding and repairing gates since 2001. Hal Gatewood still runs the crew himself, and you can reach a live person any hour at (877) 610-2993.
What makes Palm Beach different is the salt. Every gate on this barrier island takes spray from the Atlantic on one side and the Intracoastal Waterway on the other, all day, every day. Hinges that would last fifteen years inland give out in six or seven here. Operators corrode. Rack-and-pinion teeth strip. We know that because we work on these gates every week, and we order parts accordingly, not by what a catalog says the lifespan should be.
Why Gatewood Fence & Gate Is Palm Beach’s Preferred Gate Parts & Welding Company
We’re not a franchise and we’re not a call center. Gatewood Fence & Gate is owner-operated. Hal Gatewood’s name is on the shop and on every invoice, and the shop’s address is published for anyone who wants to drive over and look him in the eye. The person who answers the phone at 2 a.m. is a person, not a voicemail system. That matters when a tropical storm has knocked your gate off its track and the driveway is wide open.
Gate Parts & Welding is what we do more than anything else. We stock common hinges, rollers, locks, and drive components for the brands Palm Beach homeowners actually have, so we’re not waiting on a ground shipment from Georgia while your property sits unsecured. And every job carries our 90-Day Done Right Promise in writing. If the weld cracks or the hinge binds, one call brings us back. No runaround.
Palm Beach customers get the same no-trip-charge deal as everyone else inside the county, plus $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. We also give free second opinions on written estimates. If another company quoted you a full gate replacement and you suspect the gate just needs a hinge and a weld, bring us the quote. We’ll tell you straight.
Our Gate Parts & Welding Services in Palm Beach
Hinge Replacement
On Palm Beach’s barrier island, hinge pins corrode from both sides. The ocean sprays the outer face and the Intracoastal backs it up from the west. We replace hinges with marine-grade stainless or hot-dipped galvanized steel, sized to the weight of the gate, not just matched to whatever was there originally. A solid bronze or forged iron hinge on a Mizner-era estate gets measured and matched, not swapped for a generic barrel hinge from a big box store.
Post Replacement
Palm Beach gates fail at the post before they fail anywhere else. Saturated ground after a heavy rain or tropical storm lets footings shift, which throws the entire gate out of alignment. We cut out the old footing, dig deeper, and pour a concrete base that actually holds in saturated coastal soil. On historic properties along the Intracoastal and ocean side, we’ve set posts into existing coral-rock walls, keying new concrete into the original steel so the repair doesn’t fight the structure it’s attached to.
Rail Repair
A sagging ornamental gate almost always means the rail has bent or cracked, usually at a weld point. We fix the rail in place rather than hauling the gate to a shop. That means grinding out the cracked weld, straightening the rail, and re-welding with a full penetration pass. In Palm Beach, where heavy solid-infill gates catch hurricane wind like a sail, a properly repaired top rail is the difference between a gate that rides true and one that binds every time the wind picks up.
Custom Welding
Some Palm Beach gates can’t be fixed with off-the-shelf parts. The scrollwork is too intricate, the bronze hinge too specific, the frame built around a stone pillar that isn’t square to anything. That’s where our Palm Beach welding crew earns its keep. We fabricate brackets, rebuild broken pickets, extend frames, and repair ornamental ironwork on site, in the driveway, where you can watch the work happen. Hal has been doing this since 2001 and will tell you plainly if a part can be saved or if it’s truly done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
We service and repair gate operators, hinges, and drive hardware for the brands you’re most likely to have on a Palm Beach estate: Linear, Viking, and DoorKing. We keep racks, gears, hinges, and replacement rollers for these brands in local stock so a failed drive doesn’t mean two weeks of waiting. Our crew is certified to work on nine major gate brands in total, and we can source proprietary hardware for older models that parts suppliers have discontinued. If it’s on a Palm Beach gate, we’ve probably worked on one like it this month.
Common Gate Parts & Welding Problems We See in Palm Beach Homes
- Salt-corroded hinge pins and gearboxes. The ocean on one side and the Intracoastal on the other means everything metal oxidizes at roughly twice the manufacturer’s expected rate. Hinges stiffen, operators grind, and eventually the motor burns out trying to move a gate that no longer swings freely.
- Post footings that shift after rain. Palm Beach sits on sand and shallow limestone. When heavy rain saturates the ground, undersized footings can shift a fraction of an inch, which is enough to throw a slide gate’s rack and pinion out of alignment and strip the drive teeth.
- Bent top rails from wind load. Solid ornamental gates with decorative infill act like sails in tropical storm winds. The top rail bends and the hinge-side post gets forced out of plumb. Replacing the operator won’t fix it; the frame has to be welded and realigned first.
- Corroded loop detector wiring. On Intracoastal-side and low-lying properties, saltwater pushes into underground conduit during storm surge. The loop detector stops reading the car, and the gate won’t open on approach until the underground splice is redone and sealed.
Pricing for Gate Parts & Welding in Palm Beach, FL
Here’s what you can expect to pay for common repairs in Palm Beach:
- Hinge replacement: $180 to $420 per hinge, depending on the gate’s weight and whether the material is steel, bronze, or forged iron. Marine-grade stainless hinge pins cost a bit more and last far longer on the island.
- Post replacement: $500 to $1,400. The range reflects post material, footing depth, and whether we’re working in a coral-rock wall or a standard soil footing after storm damage.
- Rail repair: $220 to $650. A simple straightening and re-weld is on the low end. A full rail replacement with matched ornamental work goes higher.
- Custom welding: $150 to $700, depending on the complexity of the fabrication. A simple bracket is quick. Matching forged scrollwork on a 1920s estate gate is not.
We give an upfront written price before any work starts. You’ll know the number before we touch the gate, and that number does not change at the door. Estimates are free. We also offer a free second opinion on any written estimate from another company. Some Palm Beach gates don’t need the full replacement that gets pitched. They need a hinge and a weld.
We Also Serve Cities Near Palm Beach
We work throughout the island and across the bridges into West Gate, West Palm Beach, Riviera Beach, and Lake Park. If you’re just over the bridge and wondering whether your gate problem is the same as the salt-air issues we see on Palm Beach proper, the answer is usually yes, just slightly less aggressive. Same crew, same pricing, same 90-Day Done Right Promise.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Palm Beach
Saltwater intrusion is usually the culprit. Storm surge and driving rain push saltwater into the operator housing, the control board, and the underground conduit. The board corrodes internally and fails weeks or months after the storm, even if the gate itself shows no visible damage. We replace the corroded components, seal the housing properly, and check the underground connections before putting a new operator in. Call (877) 610-2993 and we’ll come look.
For a repair that matches the existing gate in material and appearance, you generally do not need ARCOM review. The Palm Beach Architectural Commission gets involved when the modification changes the gate’s design, size, or material. A hinge replacement or a welded rail repair that restores the original gate to working condition falls under maintenance. If you’re planning a full gate replacement on a landmarked property, flag it early and we’ll help you determine whether review is needed before any metal is ordered. We’d rather find out on the front end than watch you get a stop-work order.
Yes, and we do it often. Mizner-era gates from the 1920s used forged bronze and hand-worked iron that you can’t buy off a shelf anymore. We match the size and profile of the original hinge, then work the replacement to match the patina so it doesn’t stand out as a new piece. It costs more than a standard hinge, but on a Palm Beach estate, the alternative looks wrong the day it goes on.
Most Palm Beach gate operators have a manual-release lever or key, usually located on the operator itself or under a small access panel. Pulling the lever disengages the drive from the gate, so you can push it open by hand. On a heavy ornamental gate, expect to put your shoulder into it. If you don’t know where the release is on your specific operator, call us at (877) 610-2993 and we’ll walk you through it over the phone while you’re standing in front of the gate. Do not try to force the gate open without releasing the drive first; you’ll strip the gears.
Saltwater corrodes the underground wire splices where the loop detector connects to the control board. Once the splice fails, the detector stops sending a signal and the gate won’t open when a car pulls up. We dig up the splice, cut out the corroded section, and redo the connection in a sealed, watertight enclosure. On properties that flood regularly, we can relocate the splice above grade or use corrosion-resistant connections so it doesn’t fail again next season.
Call Gatewood Fence & Gate for Gate Parts & Welding in Palm Beach
If your Palm Beach gate is sagging, grinding, or sitting in the driveway after a storm, call us. A real person answers at (877) 610-2993, day or night. We’ll give you a free estimate, an honest read on whether the part can be welded or truly needs replacement, and a written 90-Day Done Right Promise on every job. Hal Gatewood has been at this since 2001, and his name is still on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.