Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Old Fig Garden
Gate repair in Old Fig Garden costs $185-$480 for most hinge, weld, and motor service calls, and we can usually have a truck out the same day you call. This neighborhood’s 70-100-year-old ornamental iron gates aren’t something a generic repair crew should touch. Hal Gatewood and his crew have been repairing these exact gates since 2001, matching original scrollwork by hand instead of swapping in modern panels that look wrong against a Spanish Colonial facade. Call (877) 610-2993 and a live person answers, day or night.
If you live near the Fig Garden Loop or up toward Van Ness, you already know these streets were built for custom work. The gate at the end of your driveway was likely fabricated for the original owner, never mass-produced. That’s why our Gate Repair team carries welding rigs on the truck and fixes the gate where it hangs, not in some shop across town.
Why Gatewood Fence & Gate Is Old Fig Garden’s Preferred Gate Repair Company
People in Old Fig Garden don’t call the first name that pops up on a search. They ask a neighbor, they check the license, they want to know the person showing up has done this before. Hal Gatewood’s name is on the shop and on every invoice, and his published address means you can drive over and look him in the eye if you ever want to. That’s the kind of accountability a subdivision gate company can’t offer.
We’ve lost count of the ornamental gates we’ve repaired in this neighborhood, but the patterns repeat: cracked scroll welds, heaved pilasters, underground operators corroded by tule fog. Homeowners here tell us the same thing. They had a company out before, the gate worked for three months, then the same sag came back. A gate sags in the hinge post, not in the middle, and that is where we start. Every job in Old Fig Garden carries our 90-Day Done Right Promise in writing, not buried in fine print.
We answer the phone 24/7 with an actual person. Not a menu tree, not a chatbot. When you call about a gate dragging on the brick pilaster off Palm Avenue, we pick up and we schedule a time we’ll actually show up for. You won’t get a “window” that stretches from 8 to 4. You’ll get a time, and the person who arrives is background-checked, uniformed, and has done this exact work on gates just like yours.
Our Gate Repair Services in Old Fig Garden
Electric Gate Repair
Most electric gate failures in Old Fig Garden trace back to something simple: a limit switch out of adjustment, a receiver that’s lost its programming, a photo eye knocked out of alignment by the gardener’s mower. We bring diagnostic gear for FAAC, BFT, Linear, and Viking boards, plus a running inventory of common parts so we’re not waiting on a warehouse while your driveway stays open. If the motor is truly dead, we quote a replacement before touching anything, and the price is agreed before any work starts.
Automatic Gate Repair
Automatic gates on these older estates often hide their operators underground, and that changes everything about repair. Underground gearboxes corrode from the inside when winter fog keeps metal damp for days at a time. We pull the unit, assess the gear wear, and tell you honestly whether it’s a seal replacement or a full swap. You’ll know the number before we order a part.
Hinge & Post Repair
Old Fig Garden’s brick and stone pilaster posts settle with the valley’s expansive clay soil, throwing gates out of plumb seasonally. We don’t just bend a hinge and call it good. We repour post footings with a deeper concrete collar where needed, shim and re-bolt the hinge plate, and re-hang the gate so it swings clean. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a 1930s iron gate binds against its frame by spring, the post has usually moved, not the gate leaf. We measure the reveal on both sides, adjust hinge spacing, and tune the operator travel so the gate stops where it should. A properly realigned gate shouldn’t scrape, slam, or reverse mid-cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Old Fig Garden
We service nine major gate brands, including FAAC, Viking, Linear, and BFT operators that are common on the older estates here. Because we work Old Fig Garden regularly, we keep local stock on common parts for these brands: receiver boards, loop detectors, limit switches, capacitor kits, and arm assemblies. If we need something uncommon, we source it directly from the distributor, not from a third-party reseller. You get the right part the first time, and we stand behind the work for 90 days.
Common Gate Repair Problems We See in Old Fig Garden Homes
- Cracked ornamental welds. Decades of Fresno heat cycling, thermal expansion, and cold fog stress the welds on scroll-iron decorative elements. They crack at the joints, and pieces eventually snag the gate frame or fall.
- Heaved gate posts. The clay-heavy soil under these older frontages expands and contracts with the seasons. Bricks and stone pilasters built in the 1920s through 1940s weren’t always poured on footings deep enough for today’s grade conditions, so they tilt and bind hinges by spring.
- Corroded underground operators. Tule fog in winter keeps metal surfaces wet, and any seal compromise turns a gearbox into a rust bucket. These units fail quietly, and you find out when you press the remote and nothing moves.
- Loop detector drift. Long gravel driveways and shifting ground can move loop detector calibration. A gate that opens for a car leaving but not for one arriving is usually a sensitivity or frequency issue in the loop, not a dead motor.
Pricing for Gate Repair in Old Fig Garden, CA
Here are real numbers for Old Fig Garden’s market. A typical hinge and post repair runs $185-$320 depending on footing work. Weld and rust repair on ornamental scrollwork runs $220-$480 for most cracked joints and rusted sections. Electric motor or control board repair runs $195-$410, and a full underground operator replacement can run $950-$2,500 depending on brand and access. Every quote is agreed before any work begins, no trip charge applies inside the county, and we knock $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Old Fig Garden
We work throughout the Central Valley, including Fresno, Clovis, Bonadelle Ranchos-Madera Ranchos, and Fowler. If you’re looking for Gate Repair in Old Fig Garden specifically, we know these streets better than any shop that has to drive in from outside. Scheduling is coordinated from our Fresno office, and crews serve Old Fig Garden locally.
Serving Old Fig Garden, CA - Our Local Coverage Area
We’re based in the Old Fig Garden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Old Fig Garden
Yes. We match the original steel profile and forge-weld replacement scrollwork on site, then hand-finish the joint so it blends with the existing patina. Replacing a period gate with a modern stock panel is the wrong answer for a Spanish Colonial or Mediterranean Revival home, and we’ll always repair before we replace. Call (877) 610-2993 and send us a photo of the damage if you want to start with a rough idea.
The valley’s expansive clay soil swells with winter moisture and contracts through summer, heaving the post just enough to misalign the gate. We fix it by re-shimming the hinge plate or repouring the post footing, not by bending the gate. A real repair here addresses the post movement, not just the symptom.
Possibly, but not always. Tule fog is hard on seals, and moisture intrusion can short a control board or corrode a limit switch. We diagnose first, report what we find, and quote the repair before any part is ordered. If the motor is dead, we’ll tell you exactly what replacement fits your existing mount and what the number is.
Yes. We service and replace underground operators from FAAC, Viking, BFT, and Linear, including gearbox rebuilds where the housing is still sound. Underground units fail more often in Old Fig Garden than above-ground units because of winter moisture and soil contact, so we inspect seals and weep holes as part of any repair. Call (877) 610-2993 to schedule a diagnostic.
Cracked ornamental welds from thermal cycling. These gates have been expanding and contracting through 70-100 Central Valley summers and foggy winters, and the stress concentration at each scroll joint eventually cracks. We weld them back, re-treat the rust, and the gate keeps its character instead of becoming a powder-coated eyesore from a catalog.
We recently reset a sagging swing gate at a Spanish Colonial Revival estate near the Fig Garden Loop, where the original 1930s hinge post had heaved out of plumb in the clay-heavy soil. Our tech dug down to repour the post footing with a deeper concrete collar, then realigned the pair of Viking underground gate operators and re-tuned the loop detector so four decades of settling didn’t bind the gate against its brick pilaster again. That’s the kind of repair this neighborhood rewards: slow, exact, and permanent.
If your Old Fig Garden gate is sagging, binding, or dead at the motor, call (877) 610-2993 now. You’ll get a live person, a straight answer, and a free estimate. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Old Fig Garden and the Central Valley since 2001.