Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Old Fig Garden
Gate access control in Old Fig Garden usually means retrofitting modern keypads, video intercoms, and smart entry onto gates built before World War II. That work, done right, runs $450 to $1,800 depending on the operator, wiring, and whether the masonry posts need attention first. We have been doing exactly this in Old Fig Garden long enough to know the house on Van Ness with the settled hinge post and the place off Maroa with the 1940s board nobody makes parts for anymore. Call (877) 610-2993 and a live person picks up, day or night.
Why Gatewood Fence & Gate Is Old Fig Garden’s Preferred Gate Access Control Company
Old Fig Garden is the kind of neighborhood where the gate says something about the house behind it. We get that. Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. When we work on an 80-year-old scroll-iron driveway gate off Van Ness Boulevard, the person who shows up is someone you can find at the hardware store next week. That’s the whole point of hiring locally owned and owner-operated.
Our customers in 93704 call us because their gate is original to the house and they do not want it hauled off and swapped for a stock panel. We weld on site. We repair control boards when repair beats replacement. And every job, from a keypad retrofit to a full smart access setup, carries the 90-Day Done Right Promise in writing. One call brings us back, no runaround.
We answer the phone with a live person 24 hours a day, 7 days a week. No voicemail maze. No call center three states away. If you have an iron gate bound shut on a Sunday morning and you cannot get the car out, the person who answers is the person who can help. Scheduling is coordinated from our Fresno, Central Valley office, and crews serve Old Fig Garden locally.
Our Gate Access Control Services in Old Fig Garden
Keypad Entry
Most Old Fig Garden keypad retrofits happen on posts that have shifted in the clay. We install the keypad, but first we make sure the post still stands where it was poured 80 years ago. A typical keypad entry install in Old Fig Garden runs $450 to $900, including programming, wiring to the operator, and weather sealing for the tule fog that soaks everything from December through February. If the existing keypad wiring is original cloth-insulated and brittle, that gets replaced too.
Video Intercom
Adding a video intercom to a gate that predates the technology is a specialty. We run low-voltage wiring through the existing post or conduit, mount the camera so it actually captures a face at the driveway, and tie it to your phone or an in-house monitor. Video intercom work in Old Fig Garden runs $900 to $1,800 depending on the operator and whether we need to core through a brick pilaster post. On older Spanish Colonial gates, we hide the wiring inside the hollow of the post rather than surface-mounting it across the stucco.
Smart Access
Smart access means your phone becomes the remote. We retrofit LiftMaster, FAAC, and BFT operators with app-based controls, and we service Linear and Viking systems as well. On Old Fig Garden gates, the smart module usually goes in after we have confirmed the gate itself swings true. A smart access retrofit runs $500 to $1,100 in this neighborhood. You get remote open and close, entry logs, and the ability to let in a contractor or a family member while you are across town.
Card Reader and Phone Entry
Card readers and phone entry systems are less common on single-home Old Fig Garden driveways, but we install and service them regularly for properties with extended families, caregivers, or long driveways off Van Ness and Wishon. A card reader install runs $600 to $1,200. Phone entry, where the call rings your cell and you press 9 to open the gate, lands in the same range. Both are cleaner retrofits than most people expect, especially when the operator is mid-2000s or newer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Old Fig Garden
We are certified to service nine major gate brands, and in Old Fig Garden we see a lot of FAAC, LiftMaster, and Viking operators that were installed decades ago. Parts matter. When a control board from a 1990s FAAC goes out, we know whether it can be sourced or whether a retrofit kit is the honest answer. We stock common replacement parts for Old Fig Garden jobs, which means less waiting when something fails. And when a brand no longer makes a board, we tell you straight instead of stringing you along.
Common Gate Access Control Problems We See in Old Fig Garden Homes
- Settled pilaster posts knocking gates out of plumb. The clay-heavy soil in Old Fig Garden swells and shrinks with winter rain and summer drought. Brick and stone posts from the 1920s and 1930s shift enough to bind hinges and trip safety photocells. We realign and shim posts, and pour new footings when the old one has failed.
- Obsolete control boards with no replacement parts. Gates installed 30 or 40 years ago often run boards that manufacturers stopped making years ago. In Old Fig Garden we see this constantly. A modern retrofit board kit usually costs less than scouring eBay for a used part with no warranty.
- Tule fog corrosion on tracks and motor seals. Winter fog off the Valley floor keeps iron wet for days. Rack and pinion tracks rust, motor seals degrade, and solar opener seals crack. We replace tracks and seals and recommend weather sealing that actually holds up in 93704 conditions.
- Original ornamental iron with no safety edges. Many Old Fig Garden gates predate modern safety requirements. A 1930s swing gate without a safety edge or photocell is a liability. We retrofit safety devices without changing the look of the gate, which matters when the gate matches the house.
Pricing for Gate Access Control in Old Fig Garden, CA
A keypad entry install in Old Fig Garden typically runs $450 to $900. Video intercoms run $900 to $1,800. Smart access retrofits run $500 to $1,100, and card readers fall between $600 and $1,200. If the existing operator is dead and needs replacement, the full job including a new operator, keypad, and safety edges runs $1,800 to $3,200 on this side of Fresno.
Cost moves on a few things: whether the post needs re-footing before we mount anything, whether the wiring is original and brittle, and whether your existing operator supports the features you want. We quote the price before any work starts and that price does not change at the door. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate you already have. And a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will give you an exact number, free.
We Also Serve Cities Near Old Fig Garden
Our Gate Access Control team works throughout Old Fig Garden and the surrounding area. If you are in Fresno, Clovis, Bonadelle Ranchos-Madera Ranchos, or Fowler, we handle the same retrofit and repair work there. But if you live in Old Fig Garden, you are calling a neighbor, not a distant office.
Serving Old Fig Garden, CA - Our Local Coverage Area
We’re based in the Old Fig Garden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Old Fig Garden
Yes, and we do this regularly on gates from the 1920s through the 1940s in Old Fig Garden. The keypad itself is almost always replaceable, and the new unit can be mounted on the same post if the post is still structurally sound. If the clay has shifted the post out of plumb, we fix that first, because a keypad on a post that is leaning is a keypad you will replace twice. You keep the ornamental iron, you get modern entry. Call (877) 610-2993 and we will tell you exactly what your gate needs.
Your gate post is moving. Old Fig Garden sits on expansive clay that swells with winter rain and shrinks in summer heat. Each winter, the soil swells enough to push brick or stone pilaster posts a fraction of an inch, and by spring the gate rubs against its own frame. The fix is realigning the hinge post and, in bad cases, pouring a new concrete footing below the frost line and the clay-swell zone. This is one of the most common calls we get in 93704. A gate sags in the hinge post, not in the middle, and that is where we start.
Usually the gate problem. On old Old Fig Garden gates, the photocells are often fine and the gate has simply moved. When a post settles or shifts, the beam misses the reflector, or the gate edge interrupts it mid-travel. We align the gate first, then test the sensors. Replacing the photocells on a gate that is out of plumb fixes nothing. If a sensor is genuinely failed, we replace it with a current unit that works with your existing operator. Call (877) 610-2993 and we will sort out which it is.
Yes. Most Old Fig Garden gates were built before video intercoms existed, but the wiring is not the obstacle people assume. We run low-voltage cable through the existing post, core through brick or stucco where needed, and mount the camera and call button so they actually function at driveway height. The harder question is whether your operator has an auxiliary output for the intercom trigger. If it does, the install is straightforward. If it does not, we can add a small relay. Either way, the price lands between $900 and $1,800 in this neighborhood. Call (877) 610-2993 for a free estimate.
That depends on whether a retrofit board exists for your operator. For some 30-year-old FAAC and Viking units in Old Fig Garden, the answer is yes, and a $400 to $700 retrofit board gets you another decade. For others, no compatible board exists and a new operator is the honest fix, around $1,200 to $2,200 installed including safety edges and programming. We will never sell you a board that does not exist, and we will not push a full replacement when a board kit will do the job. Call (877) 610-2993 and we will give you a straight answer.
Old Fig Garden’s Antique Gates Need a Different Kind of Gate Access Control
The defining challenge in Old Fig Garden is not the electronics. It is the metal and masonry under the electronics. These gates were custom-fabricated in the 1920s through 1940s to match Spanish Colonial and Mediterranean Revival houses, and they are now 70 to 100 years old. You cannot swap a stock panel onto a brick pilaster post that has stood on Van Ness since the Hoover administration and expect it to look or function right. Ornamental ironwork matching, on-site welding, and mortar repair are the actual work here. The keypad and intercom are the last step, not the first.
One job stuck with us. On Van Ness Boulevard, we retrofitted a 1930s Spanish Colonial swing gate with a LiftMaster operator and keypad entry. The original hinge post had settled into the expansive clay and the gate’s own weight had caused a severe sag at the weld. We poured a new post footing and realigned the hinge post before wiring the opener. Replacing the panel would have been pointless. The gate still looks like it did in 1935, but now it opens with a phone. That is the kind of work Old Fig Garden keeps us busy with.
If your gate access control system is failing in Old Fig Garden, call (877) 610-2993. Free estimates, upfront pricing, and a written 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Old Fig Garden and the Central Valley since 2001.